This category covers reusable glass apparatus for teaching, research and quality control labs. It includes test tubes in light-wall, rimless, side-arm and screw-cap styles (bakelite caps with rubber liners), graduated glass centrifuge tubes with stoppers or screw caps, crystallizing dishes, glass Petri dishes, evaporating basins, calibrated pycnometers, 300 mL B.O.D. bottles, and ground-joint pieces such as Claisen, vacuum, reducing and expansion adapters and stoppers. Larger setups include Soxhlet extraction apparatus, Kjeldahl distillation sets, water-jacketed flasks, distillation apparatus and organic chemistry glassware kits, plus porcelain and plastic spot plates.

Check the glass type first: borosilicate handles heating and temperature changes far better than soda glass. Match ground-joint sizes exactly, such as 24/40 or 29/42, so adapters, stoppers and flasks fit. Compare capacity, dimensions, wall thickness, graduation or calibration, closure type and pack quantity, and confirm the speed rating before using glass tubes in a centrifuge.

Reusable Glassware: common questions

What is a crystallizing dish used for?

A crystallizing dish is a shallow, flat-bottomed glass dish with straight sides. It is used to evaporate solutions so crystals can form, and also as a water or ice bath, a cover dish, or a container for holding small items. Borosilicate dishes can be heated gently, and versions with a spout make pouring easier.

When should I use glass centrifuge tubes instead of plastic?

Glass centrifuge tubes are chosen for organic solvents that attack plastics, for work where plastic leachables could interfere, and when tubes will be cleaned and reused. They can break under high forces, so use them only within the speed or g-force rating given by the maker, with properly fitting adapters or cushions in the rotor.

What does 24/40 mean on lab glassware?

24/40 is a standard taper ground-glass joint size. The first number is the approximate diameter in millimeters at the wide end of the joint, and the second is the length of the ground section in millimeters. Male (cone) and female (socket) joints with the same numbers fit together, and reducing or expansion adapters connect different sizes.

What is the difference between borosilicate and soda-lime glass?

Borosilicate glass has low thermal expansion, so it tolerates heating and rapid temperature changes much better than soda-lime glass and is more resistant to chemical attack. Soda-lime glass costs less and is used for items that are not heated, such as some jars and display pieces. For heating, autoclaving or flame work, choose borosilicate.

Reusable Glassware

Filters
Set Descending Direction

186 items

Page
per page
View as List Grid
  1. Valve Size 4 W/O Plug
    Manufacturer: Kimble Chase
    Valves Right Angle Extended Tip PTFE Plug HI-VAC Valve Without Plug Size 4 Designed with a precision external thread for fine control. The accurately controlled valve seat and the extended tip on the PTFE plug allow semi-needle valve control for both liquids and gases. (1 per EA)
    Learn More
    $44.19
  2. Valve Size 4 W/O Plug
    Manufacturer: Kimble Chase
    Valves Straight Low Hold Up Extended Tip PTFE Plug HI-VAC Valve Without Plug Size 4 Sidearms are bent to minimize holdup of liquids. O-rings are Viton. (1 per EA)
    Learn More
    $60.13
  3. Valve Size 12 W/O Plug
    Manufacturer: Kimble Chase
    Valves Right Angle with Tip O-Ring Glass Plug HI-VAC Valve Without Plug Size 12 This valve uses a glass plug (as an alternative to PTFE or CTFE) for applications where the out-gassing plug material is undesireable. All plugs are totally interchangable with other Hi-Vac counterparts. (1 per EA)
    Learn More
    $111.37
  4. Valve Hi-Vac Size 2 3-Way
    Manufacturer: Kimble Chase
    Valves Three Way without Tip O-Ring PTFE Plug HI-VAC Bore Range (mm) 0-2. Approx. Stem O.D. (mm) 8. O-Ring Size 5-105 Three way configuration without tip o-ring exposure. O-rings are Viton. (1 per EA)
    Learn More
    $216.93
  5. Beads,Solid Glass,Packing,3mm
    Manufacturer: Kimble Chase
    Beads,Solid Glass,Packing,3mm (1 per EA )
    Learn More
    was $484.87 Special Price $461.97
  6. Tube,Gas Measuring,50ml
    Manufacturer: Kimble Chase
    Burets Gas Measuring Tube Capacity (mL) 50. Interval Grad. (mL) 0.5 to 50. Sub-Division (mL) 0.1. Tol. (mL) 0.10. Overall Length (mm) 635 KIMAX gas measuring tube with a durable black ceramic enamel scale. Closed at the zero end of the tube. Without stopcock. (1 per EA)
    Learn More
    was $168.00 Special Price $161.66
  7. Jar,Cold Test,35X125mm
    Manufacturer: Kimble Chase
    KIMAX brand Cold Test Jar Cloud and Pour Points Flat bottom jar with marking spot. Open end is reinforced with thick bead. Top OD: 35mm. Height: 125mm. Graduation ring is 54mm from inside bottom. ASTM D97 and D2500. Comes in pack of 12 or case of 36. (36 per CS )
    Learn More
    was $873.20 Special Price $769.48
  8. Flk Rb 1N 50ml 19/22 Bw
    Manufacturer: Kimble Chase
    Labsets Organic Chemistry Kits Macroscale [standard taper] 14/20 and [standard taper] 19/22 KEM-KITS [standard taper] 19/22 KEM-KIT Components. No 9 Flask 50 mL KEM-KITS contain a selection of basic small scale glassware for extraction reflux reflux with addition fractionation distillation. (1 per EA)
    Learn More
    $47.27
  9. Flk Rb 2N 50ml 14/20 14/20
    Manufacturer: Kimble Chase
    Flasks Distilling Two Neck Round Bottom Heavy Wall Capacity (mL) 50. Center [standard taper] Joint 14/20. Side [standard taper] Joints 14/20. Approx. Dia. (mm) 48 Two neck flask with [standard taper] outer joints. Side neck is angled. (1 per EA)
    Learn More
    $91.80
  10. Conn Adapter 13-425 19/22
    Manufacturer: Kimble Chase
    Adapters Rotary Evaporator Vial Adapter Systems Vial Connecting AdaptersGlass GPI Thread Size 13-425. [standard taper] Joint 19/22. Approx. Overall Height (mm) 50 Design provides for expanded volume for organic mixtures that have a tendency to foam excessively. (1 per EA)
    Learn More
    $48.88
  11. Adapter Ptfe 5.5-6.5 14/20
    Manufacturer: Kimble Chase
    Adapters Inlet Universal with Hose Connection Size 21. [standard taper] Joint 14/20. Hose Connection #2. Accommodation Range (mm) 5.5/6.5 Converts plain stem type funnels for vacuum filtration. Provides a combination inlet and vent tube on a single neck vessel. (1 per EA)
    Learn More
    was $168.24 Special Price $166.44
  12. Adapter Distilling
    Manufacturer: Kimble Chase
    Adapters Distilling [standard taper] Joints 14/20. Distance Between [standard taper] Joints (mm) 100 Useful in the sub-boiling separation of mixtures having volatile components. Joints are parallel. (1 per EA)
    Learn More
    $113.97
  13. Distn Column 200mm 19/22
    Manufacturer: Kimble Chase
    Distillation and Reactors Column Distilling/Condensing [standard taper] Joints 19/22. Hose Connections #1. Column Height (mm) 200 With a [standard taper] outer joint at top and a [standard taper] inner drip joint at bottom. Indentations at the bottom for supporting packing material. (1 per EA)
    Learn More
    $159.91
  14. Sparger Fritted 5ml Left
    Manufacturer: Kimble Chase
    Purge and Trap Sparger U-Shaped for Vial Autosamplers Sparger Fritted 5 mL Left Stem (2000/3000) These U-shaped spargers are designed for use with the Tekmar Purge and Trap Concentrators when using either the AQUATek 50 or ALS 2050 vial auto-samplers. (1 per EA)
    Learn More
    was $262.96 Special Price $262.89
  15. 10X75 Boro Is Green 5 Cs Min
    Manufacturer: Kimble Chase
    Mark-M Blood Typing Tubes Size: 10x75mm. Volume: 3mL. Color: green. IS imprint. Made from borosilicate glass. Manufactured with a fused ceramic paint to form writing labels which will not separate from the glass tube.
    Learn More
    was $179.20 Special Price $149.11
  16. Condenser Sublimator
    Manufacturer: Kimble Chase
    Microscale Sublimator [standard taper] 14/10 Funnel Condenser Only Sublimation assembly with vertically adjustable condenser tube for use with micro-scale vessels. (1 per EA)
    Learn More
    $21.13
  17. Kit 14/10 Intrm Ekono-Case
    Manufacturer: Kimble Chase
    Labsets kits Organic Chemistry Microscale Threaded / [standard taper] 14/10 Intermediate EKONO-CASE Intermediate [standard taper] 14/10 Microscale Kit The 746000 Series MICROFLEX Kits feature [standard taper] 14/10 standard taper connections. (1 per EA)
    Learn More
    $694.67
  18. Foam Insert Set
    Manufacturer: Kimble Chase
    KONTESbrand Organic Chemistry Labset Microscale Kit Foam Insert Set Only Williamson (1 per EA)
    Learn More
    $18.89
Filters
Set Descending Direction

186 items

Page
per page
View as List Grid