This category covers reusable glass apparatus for teaching, research and quality control labs. It includes test tubes in light-wall, rimless, side-arm and screw-cap styles (bakelite caps with rubber liners), graduated glass centrifuge tubes with stoppers or screw caps, crystallizing dishes, glass Petri dishes, evaporating basins, calibrated pycnometers, 300 mL B.O.D. bottles, and ground-joint pieces such as Claisen, vacuum, reducing and expansion adapters and stoppers. Larger setups include Soxhlet extraction apparatus, Kjeldahl distillation sets, water-jacketed flasks, distillation apparatus and organic chemistry glassware kits, plus porcelain and plastic spot plates.

Check the glass type first: borosilicate handles heating and temperature changes far better than soda glass. Match ground-joint sizes exactly, such as 24/40 or 29/42, so adapters, stoppers and flasks fit. Compare capacity, dimensions, wall thickness, graduation or calibration, closure type and pack quantity, and confirm the speed rating before using glass tubes in a centrifuge.

Reusable Glassware: common questions

What is a crystallizing dish used for?

A crystallizing dish is a shallow, flat-bottomed glass dish with straight sides. It is used to evaporate solutions so crystals can form, and also as a water or ice bath, a cover dish, or a container for holding small items. Borosilicate dishes can be heated gently, and versions with a spout make pouring easier.

When should I use glass centrifuge tubes instead of plastic?

Glass centrifuge tubes are chosen for organic solvents that attack plastics, for work where plastic leachables could interfere, and when tubes will be cleaned and reused. They can break under high forces, so use them only within the speed or g-force rating given by the maker, with properly fitting adapters or cushions in the rotor.

What does 24/40 mean on lab glassware?

24/40 is a standard taper ground-glass joint size. The first number is the approximate diameter in millimeters at the wide end of the joint, and the second is the length of the ground section in millimeters. Male (cone) and female (socket) joints with the same numbers fit together, and reducing or expansion adapters connect different sizes.

What is the difference between borosilicate and soda-lime glass?

Borosilicate glass has low thermal expansion, so it tolerates heating and rapid temperature changes much better than soda-lime glass and is more resistant to chemical attack. Soda-lime glass costs less and is used for items that are not heated, such as some jars and display pieces. For heating, autoclaving or flame work, choose borosilicate.

Reusable Glassware

Filters
Set Descending Direction

969 items

Page
per page
View as List Grid
  1. Freeze Dry Ampoule,1mL Constriction on neck
    Manufacturer: Bellco Glass Inc
    Type 1 class a Borosilicate glass for freeze drying or cryogenic storage. The neck has pre-drawn constriction to facilitate sealing. Flat bottom Constriction neck Neck od : 8mm Bottom od: 11mm Capacity: 1ml Length: 145mm (144 per CS )
    Learn More
    $426.64
  2. Petri Dish, outer dia 5cm, Soda glass
    Manufacturer: Eisco Scientific LLC
    Petri Dish, outer dia 5cm, Soda glass (1 per EA )
    Learn More
    was $4.15 Special Price $3.37
  3. Short Path Distillation Set, Glass ware only. 21 peice
    Manufacturer: Eisco Scientific LLC
    Short Path Distillation Set, Glass ware only. 21 peice (21 per PK )
    Learn More
    was $747.65 Special Price $608.13
  4. Water Jacketed Flask Complete,3L
    Manufacturer: Bellco Glass Inc
    For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8" ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. Specifications: Jacket Volume (mL): 1300ml Cap Size: 100mm Sidearm Cap Size (mm): 45 OD x OAH: 200x330mm (1 per EA )
    Learn More
    $1,835.18
  5. Bell-Stir 4 Position, 115V-500mL
    Manufacturer: Bellco Glass Inc
    Bellco Magnetic Stirrers are specifically designed for growing both mammalian and bacterial cultures where minimal heat transfer from the magnetic stirrer to the culture vessel is essential. They are ideal for tissue cultures grown in spinner flasks. Bellco incorporates low wattage DC motors to reduce stirrer heat up. Independent power and speed controls allow unit to maintain a speed setting when switched on and off. Powerful magnets rotate on ball bearing shafts for increased coupling and continuous maintenance free service. Polyurethane drive belts resist humidity and temperature. The 100V, 115V & 230V models feature a convenience outlet that allows daisy chaining of up to ten stirrers. Speed range: 30 - 1000 rpm +/- 5% (1 per EA )
    Learn More
    $1,098.76
  6. Low Profile Glass Impeller Assembly 3L
    Manufacturer: Bellco Glass Inc
    Low Profile Glass Impeller Assembly Size: 3000ml (for low profile 3l vessel) Paddle: 3" tall x 7" wide (1 per EA )
    Learn More
    $160.07
  7. TUBE, TEST, 12 X 100MM,PK/48
    Manufacturer: Eisco Scientific LLC
    TUBE, TEST, 12 X 100MM,PK/48 (48 per PK)
    Learn More
    was $18.16 Special Price $14.77
  8. Photoetch Coverslip 25mm German Glass
    Manufacturer: Bellco Glass Inc
    Ideal for florescence and con-focal microscopy Size: 25mm round od Material: German glass ( d-263m) 200 areas in diamond pattern Each square measures 0.6mm x 0.6mm Facilitates mounting of micro-manipulated cells or chromosome spreads Line thickness: .02mm (25 per CS )
    Learn More
    $178.91
  9. Adapter Cone/Screw thread - Straight, Cone 14/23
    Manufacturer: Eisco Scientific LLC
    Adapter Cone/Screw thread - Straight, Cone 14/23 (1 per EA )
    Learn More
    was $8.87 Special Price $7.21
  10. 40ml Crystallizing Dishes Without Spout, Boro. Glass, Flat Bottom
    Manufacturer: Eisco Scientific LLC
    40ml Crystallizing Dishes Without Spout, Boro. Glass, Flat Bottom (1 per EA )
    Learn More
    was $6.51 Special Price $5.29
  11. Centrifuge Tube 5ml, Conical, height 100mm, OD 13mm, boro. glass
    Manufacturer: Eisco Scientific LLC
    Centrifuge Tube 5ml, Conical, height 100mm, OD 13mm, boro. glass (1 per EA )
    Learn More
    was $2.40 Special Price $1.95
  12. Test Tube, light wall rimless, 50ml, 150x24mm, Borosilicate glass, PK/24
    Manufacturer: Eisco Scientific LLC
    Test Tube, light wall rimless, 50ml, 150x24mm, Borosilicate glass, PK/24 (24 per PK )
    Learn More
    was $49.40 Special Price $40.18
  13. TUBE, CLTRCAP 12X100MM,PK/24
    Manufacturer: Eisco Scientific LLC
    TUBE, CLTRCAP 12X100MM,PK/24 (1 per EA )
    Learn More
    was $23.38 Special Price $19.02
  14. Dish Crystallizing, outer dia 100mm, borosilicate glass, flat bottom with spout
    Manufacturer: Eisco Scientific LLC
    Dish Crystallizing, outer dia 100mm, borosilicate glass, flat bottom with spout (1 per EA )
    Learn More
    was $26.05 Special Price $21.19
  15. Stainless Steel Sample Port Assembly 3/8 For 7L Bioreactor Systems
    Manufacturer: Bellco Glass Inc
    SST Sample Port Assyembly for 7l bioreactor systems - English threads Material: 316l SST with electropolish finish - inside & out Tubing specifications: .250" od x .152" id Overall length: 14 5/16" Insertion length: 12 7/8" Supply with SST 3/8-24 nut & o-ring (1 per EA )
    Learn More
    $503.98
  16. 150ml Vigrex Column - Screw Thread 19/26 Socket / Cone Size
    Manufacturer: Eisco Scientific LLC
    150ml Vigrex Column - Screw Thread 19/26 Socket / Cone Size (1 per EA )
    Learn More
    was $67.71 Special Price $55.07
  17. United Scientific® Reducing Adapter, Socket 24/40, Cone 45/50
    Manufacturer: United Scientific Supplies
    United Scientific® Reducing Adapter, Socket 24/40, Cone 45/50 (1 per EA )
    Learn More
    was $29.35 Special Price $21.40
  18. Leighton Tube 16x125mm
    Manufacturer: Bellco Glass Inc
    Leighton culture tubes are useful for the study of pathogenic effects on viruses on cells as well as sponge matrix culture and nutritional studies. Use cover slips for preparing expectant tissue cultures with leighton culture tubes. White marking area (36 per CS )
    Learn More
    $376.07
  19. United Scientific® Stopper, Glass, Solid, #27
    Manufacturer: United Scientific Supplies
    Solid penny head glass stoppers have an interchangeable ground joint. For use with ground jointed glassware such as flasks and separatory funnels. (1 per EA )
    Learn More
    was $24.80 Special Price $18.10
  20. Adapter Reduction, Socket size 14/23, Cone size 19/26
    Manufacturer: Eisco Scientific LLC
    Adapter Reduction, Socket size 14/23, Cone size 19/26 (1 per EA )
    Learn More
    was $13.69 Special Price $11.14
  21. Stopper-Flat Head, borosilicate glass, Solid, Cone 19/26
    Manufacturer: Eisco Scientific LLC
    Stopper-Flat Head, borosilicate glass, Solid, Cone 19/26 (1 per EA )
    Learn More
    was $4.71 Special Price $3.83
  22. Adapter Receiver Delivery, Short Stem, Socket size 24/29, Length 65mm
    Manufacturer: Eisco Scientific LLC
    Adapter Receiver Delivery, Short Stem, Socket size 24/29, Length 65mm (1 per EA )
    Learn More
    was $13.69 Special Price $11.14
  23. Set 46 BU Organic Chemistry Kit
    Manufacturer: Eisco Scientific LLC
    Set 46 BU Organic Chemistry Kit (1 per EA )
    Learn More
    was $281.16 Special Price $228.69
  24. Stainless Steel Hi-Torq Overhead Drive Implr, 15L-FW Full Width
    Manufacturer: Bellco Glass Inc
    Hi-torq SST OHD impeller assembly, full width Size: 15l For hi-torq motor & cap assembly (7774-40115/40230/ & 7764-74000) Similar to 1964-60015 but to accept 1/2" shaft from 7764-74000 cap assembly Material: 316l Paddle size: 3" tall x 9" wide (1 per EA )
    Learn More
    $741.19
Filters
Set Descending Direction

969 items

Page
per page
View as List Grid