Reusable Glassware

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8" ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. Specifications: Jacket Volume (mL): 175ml Cap Size: 70mm Sidearm Cap Size (mm): 25 OD x OAH: 85x160mm (1 per EA )

Type 1 Class A Borosilicate glass 7mm od x 230mm long for mc impeller assemblies Glass Impeller Shaft, 1L (1 per EA )

Ideal for florescence and confocal microscopy 520 alphanumeric coded squares .17-.19mm thick Each square measures 0.6mm x 0.6mm #1.5 thickness Facilitates mounting of micro-manipulated cells or chromosome spreads (25 per CS )

The hungate anaerobic culture tube was developed for growing and maintaining anaerobic bacteria and culture conditions. method of hungate utilizes syringe methods for anaerobic. •Hungate Culture Tubes are designed for maintaining anaerobic culture conditions •Dimensions: 16mm OD x 125mm OAL •Material: Type 1 Class A Borosilicate •Case Quantity: 250 •Screw caps included, catalog #2047-16000 •Septum stoppers included, catalog #2047-11600 Technique: Exclude oxygen by flushing the tube with the desired gas. Add 4.5mL od pre-reduced anaerobic agar medium into tube. Seal the tube with the butyl rubber stopper and screw cap and autoclave. Innoculate with a syringe. Incubate in water bath. (250 per CS )

Type 1 Class A Borosilicate glass 7mm od x 300mm long Type 1 Class A boro for 3L spinners Glass Impeller Shaft, 3L Micro-Carrier (1 per EA )

The hungate anaerobic culture tube was developed for growing and maintaining anaerobic bacteria and culture conditions. method of hungate utilizes syringe methods for anaerobic. •Hungate Culture Tubes are designed for maintaining anaerobic culture conditions •Dimensions: 16mm OD x 125mm OAL •Material: Type 1 Class A Borosilicate •Case Quantity: 250 •Screw caps included, catalog #2047-16000 •Septum stoppers included, catalog #2047-11600 Technique: Exclude oxygen by flushing the tube with the desired gas. Add 4.5mL od pre-reduced anaerobic agar medium into tube. Seal the tube with the butyl rubber stopper and screw cap and autoclave. Innoculate with a syringe. Incubate in water bath. (250 per CS )

Ideal for 3l bioreactors Fits 3/8" hole Material: stainless steel 316l Dimensions: 9 3/16" oal Insertion length: 7 3/4" Tube: 1/4" od x 5/32" id with ra finish With hose barb Supply with: o-ring & stainless steel nut (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. Ideal for use of filling other glass vessels. Receiving vessel is placed under bell to maintain aseptic conditions during filling. Attaches to reservoir with rubber tubing. Specifications: Type 1 Class A Borosilicate Glass Dimensions: 70x125mm Tubing Size: 1/2" 2 per case (2 per CS )

Manufactured from Type1 Class B Borosilicate Glass. Large opening and sloping shoulders facilitate pouring and cleaning. Heavier walls prevent breakage of glass. Media storage bottles have white graduations and a marking area. They are supplied with rubber lined black phenolic screw cap. Specifications: Type 1 Class B Borosilicate Glass Sizes: 500ml (33)mm Cap OD x OAH: 88 x 187 Case Quantity: 12 (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Ideal for use of filling other glass vessels. Receiving vessel is placed under bell to maintain aseptic conditions during filling. Attaches to reservoir with rubber tubing. Specifications: Type 1 Class A Borosilicate Glass Dimensions: 104x130mm Tubing Size: 1/2" 2 per case (2 per CS )

Ideal for florescence and con-focal microscopy Size: 12mm round od Material: German glass ( d-263m) Grid pattern: diamond pattern 100 alphanumeric coded squares Each square measures 0.6mm x 0.6mm (25 per CS )

Heating and cooling coils are used for cell culture temperature manipulation within the bioreactor vessel. Must be hooked up to a water circulating mechanism for heating or cooling. SST cooling coils For 10l bioreactor systems - English threads Tubing Specifications" 5/16" OD Material: 316L SST with Electropolish Finish Overall Length: 17 5/8" OD of Coil: 4 5/8" Number of turns: 5 (1 per EA )

The Bellco Pipette Plugger is designed for plugging a full range of standardized cotton plugging pipettes. This unit has three speeds and can be adjusted quickly and easily to plug 40, 50 or 60 pipettes per minute. The unit will produce uniform shape cotton plugs, minimizing the problem of tight and loose plugs. Machine is portable with a convenient carrying handle. Time tested design with a precision Geneva mechanism. --Speed Range: 3 Settings, Approximately 40/50/60 Pipettes/Minute --Weight: 19 Lbs. (9.0 Kg) --Operates In: Continuous Or Actuate Mode --Supplied With 1 Bag Of Cotton Roving 7750-22222 (1 per EA )

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 13/16" (20.6mm) Tube size: 18mm Spacing: 4x6 holds 24 tubes Dimensions: 5 1/2" x 3 3/4" x 3" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .135"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 1 9/16" (39.6mm) Tube size: 38mm Spacing: 4x10 holds 40 tubes Dimensions: 16 1/2" x 6 3/4" x 5" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .162"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

Type 1 class a Borosilicate glass that are designed for maintaining anaerobic conditions. Useful for studies involving methane-producing bacteria, cell culture, drug discovery, and research and development. Specifications: Size: 100ml Neck Finish: #20 Alum Seal Neck, Dimensions: 56mm OD x 100mm OAH, Neck Dimensions: 19.7-20.2mm OD, 13.3-13.6mm ID, Grad. Range: 20mL-80mL, every 20mL, Supply with #20 Septum Stopper & Alum Seal. 12 per case. (12 per CS )

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm, sold separately Dimensions: 170" x 110" Flask size: 500ml (1 per EA )

The 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4" tubes. Specifications: Accepts All Standard Fittings And Probes 316L Stainless Steel Cap Seal with compression fittings for probes/tube insertion. 4 sidearms positioned 90° for increased capabilities. Accessories: 1965-11400 Flask Only, 1L 1965-60014 SST Cap seal, 1L, 5 port with IOB 1965-13400 Flask Only, 3L 1965-60034 SST Cap seal, 3L, 5 port with IOB 1965-45200 45mm Plug w/Compression Fitting & Hose Barb. (1 per EA )

The Bellco Digital Mini-Orbital Shaker is a high speed shaker for general laboratory cell culture experimentation. This Bellco design incorporates an orbital platform that accepts a variety of optional trays. Peg and grommet design offers a simple method to install or change trays; four versions of trays are available. Brushless DC motor designed for minimal maintenance. (1 per EA )

Manufactured from Type 1 Borosilicate Glass. Designed with deep side baffles for optimal agitation. Promotes enzyme digestion of tissue fragments and homogenates into cell suspense. Includes rubber lined black phenolic screw caps. Integral dam contains non-trypsinized tissue during decanting. Specifications: Type 1 Class A Borosilicate Glass Size: 250ml Sidearm Cap: 16mm Acid Etched & Filled Graduations TOP SCREW CAP SIZE IS 38MM SIDEARM SCREW CAP SIZE IS 16MM OD X OAH (mm): 80 X 163 Case Qty:3 (3 per CS )

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units feature a solid state control with heavy-duty DC motor and analog tachometer. Non-modular production models feature rubber bumpers, handles and a slotted rear guard. (1 per EA )

Description: Adjustable Hanging Bar Spinner Flask Complete, 25ml Bellco Adjustable Hanging Bar Spinner Flasks were designed for the efficient growth of suspension cells at low speeds. This flask is manufactured of medium-walled borosilicate glass tubing with black phenolic screw caps. The hanging spinner is adjustable and useful over a wide range of stirring speeds. The 1967-style spinner includes a center screw cap with a stopper for mounting the glass impeller shaft. Adjustable Hanging Bar Spinner Flask consists of: Flask, Impeller Assembly, Impeller Glass Shaft, and Cap Assembly. Flask Specifications [1967-10025]: Material: Type 1 Class A Borosilicate Glass Dimensions: 38.1mm OD x 120mm Overall Height, Two 18mm Sidearms angled 40° offset center One 38mm Screw Thread Center Neck Flask has flat bottom – no dimple Graduations: 5mL to 25mL, every 5mL – White Ink (Approx Volumes) Supply with: Two Rubber Lined Black Phenolic Caps Impeller Assembly Specifications [1969-30025]: Impeller Assembly consists of impeller magnet & magnet holder Impeller magnet: PTFE coated magnet, 25.4mm long x 7.62mm OD (approx.) Magnet Holder: White PTFE, 34.9mm long x 15.9mm OD Glass Shaft Specifications [1969-70100]: Material: Type 1 Class A Borosilicate Glass Dimensions: 7mm OD x 120mm long Cap Assembly Specifications [1967-90038]: Cap Assembly consists of screw cap and stopper Screw Cap: 41mm OD x 37.8mmH with 20.6mm center hole #4 Stopper: Silicone with 6.4mm center hole (1 per EA )

Ideal use for over head drive vessels. Description: 3L OHD Impeller Assembly Consists of Paddle, Plug, Paddle Holder, and Drive Shaft. Overall length is adjustable from 8.75”-10.75” with ½” increments. Paddle [A523-206]: PTFE material, 108.0 mm wide x 44.5mm tall x 0.8mm thick Plug [A542-49]: PTFE, 9.5mm OD x 19.1mm long (approx.) Paddle Holder [A542-87]: White PTFE, 184.2mm long x 19.1mm OD Drive Shaft [A542-317]: 316L SST, 158.8mm long x 6.4mm OD (approx.) (1 per EA )

Black Phenolic Screw Cap Assembly For Adjustable Hanging Bar Spinner Flask Black phenolic screw caps are manufactured from specially formulated phenolic resin to resist the effects of temperature and steam autoclaving. They have a non-toxic white rubber liner for all general culture applications. Consists of screw cap liner and stopper or compression fitting. 51mm. (1 per EA )