This category covers reusable glass apparatus for teaching, research and quality control labs. It includes test tubes in light-wall, rimless, side-arm and screw-cap styles (bakelite caps with rubber liners), graduated glass centrifuge tubes with stoppers or screw caps, crystallizing dishes, glass Petri dishes, evaporating basins, calibrated pycnometers, 300 mL B.O.D. bottles, and ground-joint pieces such as Claisen, vacuum, reducing and expansion adapters and stoppers. Larger setups include Soxhlet extraction apparatus, Kjeldahl distillation sets, water-jacketed flasks, distillation apparatus and organic chemistry glassware kits, plus porcelain and plastic spot plates.

Check the glass type first: borosilicate handles heating and temperature changes far better than soda glass. Match ground-joint sizes exactly, such as 24/40 or 29/42, so adapters, stoppers and flasks fit. Compare capacity, dimensions, wall thickness, graduation or calibration, closure type and pack quantity, and confirm the speed rating before using glass tubes in a centrifuge.

Reusable Glassware: common questions

What is a crystallizing dish used for?

A crystallizing dish is a shallow, flat-bottomed glass dish with straight sides. It is used to evaporate solutions so crystals can form, and also as a water or ice bath, a cover dish, or a container for holding small items. Borosilicate dishes can be heated gently, and versions with a spout make pouring easier.

When should I use glass centrifuge tubes instead of plastic?

Glass centrifuge tubes are chosen for organic solvents that attack plastics, for work where plastic leachables could interfere, and when tubes will be cleaned and reused. They can break under high forces, so use them only within the speed or g-force rating given by the maker, with properly fitting adapters or cushions in the rotor.

What does 24/40 mean on lab glassware?

24/40 is a standard taper ground-glass joint size. The first number is the approximate diameter in millimeters at the wide end of the joint, and the second is the length of the ground section in millimeters. Male (cone) and female (socket) joints with the same numbers fit together, and reducing or expansion adapters connect different sizes.

What is the difference between borosilicate and soda-lime glass?

Borosilicate glass has low thermal expansion, so it tolerates heating and rapid temperature changes much better than soda-lime glass and is more resistant to chemical attack. Soda-lime glass costs less and is used for items that are not heated, such as some jars and display pieces. For heating, autoclaving or flame work, choose borosilicate.

Reusable Glassware

Filters
Set Descending Direction

186 items

Page
per page
View as List Grid
  1. Adapter Claisen St 24/40
    Manufacturer: Kimble Chase
    Claisen Adapter for Distillation Provides dual entry into a variety of flasks. Allows temperature measurement at either top outer opening when used in conjunction with a thermometer adapter. Useful for reflux with addition-type reactions. Standard taper 24/40 Joint. 155Hx92Wmm. (1 per EA)
    Learn More
    $152.10
  2. ADAPTER VACUUM ST 24/40
    Manufacturer: Kimble Chase
    Adapters Distillation Bent 105 with Vacuum Take-Off [standard taper] Joints 24/40. Hose Connection #2. Approx. Overall Height (mm) 145 With a hose connector and a drip tip. (1 per EA)
    Learn More
    $118.56
  3. Tube,Dct,Flat,No Cap,16X125mm,15-415
    Manufacturer: Kimble Chase
    Tubes Culture Disposable Screw-Cap Flat Bottom Approx. O.D. (mm) 16. Approx. Length (mm) 125. Approx. Overflow Capacity (mL) 16. GPI Thread Finish 15-415 Tubes are a suitable for tissue culture work and general bacteriological use. With a flat bottom and without a marking area. (1000 per CS )
    Learn More
    was $849.10 Special Price $833.40
  4. 50ml Reaction Absorption Tube
    Manufacturer: Kimble Chase
    Reaction/Abs Tube 50 Ml Kimble chase midi-vap 4000 reaction/absorption tube50 ml29/42 joint (2 supplied) for cyanide distillation system1/case (1 per EA)
    Learn More
    $126.28
  5. Tube,Culture,PTFE Lined,13-415,13X100M
    Manufacturer: Kimble Chase
    KIMAX Culture Tube with PTFE-Faced Rubber-Lined Screw Cap Reusable. Features a large marking spot. Threaded phenolic cap can be loosened for autoclaving. Designed from ASTM Specification E982 Type VI Class B requirements. Sizemm: 13x100. Volume: 8ml. GPI thread: 13-415. (288 per CS )
    Learn More
    was $1,140.05 Special Price $857.90
  6. Culture Tube, PTFE Lined Cap, 25X150 CS36
    Manufacturer: Kimble Chase
    KIMAX Culture Tube with PTFE-Faced Rubber-Lined Screw Cap Reusable. Features a large marking spot. Threaded phenolic cap can be loosened for autoclaving. Designed from ASTM Specification E982 Type VI Class B requirements. Sizemm: 25x150. Volume: 50ml. GPI thread: 24-410. (36 per PK)
    Learn More
    was $499.74 Special Price $272.86
  7. Adapter Inlet 24/40
    Manufacturer: Kimble Chase
    Adapters Inlet Thermometer Straight with Hose Connection [standard taper] JointsBottom Top 24/40 24/40. Hose Connection #2. Approx. Overall Height (mm) 155 Hose connection on the side. (1 per EA)
    Learn More
    was $110.97 Special Price $109.76
  8. Tube,Culture,PTFE Lined,15-415,16X125M
    Manufacturer: Kimble Chase
    KIMAX Culture Tube with PTFE-Faced Rubber-Lined Screw Cap Reusable. Features a large marking spot. Threaded phenolic cap can be loosened for autoclaving. (288 per CS )
    Learn More
    was $1,369.60 Special Price $1,030.65
  9. Stopcock Plug, Straight,PTFE,2mm
    Manufacturer: Kimble Chase
    Stopcocks Straight Bore PTFE Plug PS Stopcock Size Bore (mm) 2. Plug Size (mm) 11/25 With a 1:5 taper PTFE plug and a threaded pressure nut. The more exaggerated taper permits easier use at higher than ambient temperatures. (1 per EA)
    Learn More
    was $28.70 Special Price $27.63
  10. Pickup Adapter 47mm
    Manufacturer: Kimble Chase
    ULTRA-WARE Solvent Pickup Adapter Solvent pickup adapter for use with ULTRA-WARE Microfiltration Apparatus. Also use to convert existing Ultra-Ware and Millipore filtration assemblies for in-line filtration/degassing. (1 per EA)
    Learn More
    $273.69
  11. Schlenk Tube 25ml
    Manufacturer: Kimble Chase
    Vacuum airless Vacuum Tube Schlenk Capacity (mL) 25. Approx. Stem O.D. (mm) 9. Approx. Body O.D. x Height (mm) 19 x 100. Approx. Overall Width x Height (mm) 65 x 165 Tube has a HI-VAC valve to control gas flow to the reaction tube. Suitable for use with 216050 or 216060 manifolds. (1 per EA)
    Learn More
    was $226.62 Special Price $201.31
  12. Valve High Vac PTFE Sz 4
    Manufacturer: Kimble Chase
    HI-VAC Valve For vacuum applications up to 5x10-6mm Torr. PTFE shaft can handle system temperatures of 230[degree]C continuously or intermittently at 275[degree]C. Primary seal made with Viton O-ring. Bore range: 0-4mm. Stem OD: 9mm. O-ring shaft: 6.07IDx1.78Wmm. O-ring tip: 3.91IDx1.27Wmm. (1 per EA)
    Learn More
    was $101.06 Special Price $100.01
  13. Tube,Thistle,300X61/2mm
    Manufacturer: Kimble Chase
    Funnels Long Stem Thistle Top 12 Length of Stem (mm) 300. Approx. O.D. of Stem (mm) 6.5 KIMAX tube with a sturdy extra long stem. Shape of the funnel is cylindrical (similar to the thistle top style). (1 per EA)
    Learn More
    was $43.84 Special Price $41.95
  14. Beads,Solid Glass,Packing,4mm
    Manufacturer: Kimble Chase
    KIMAX Glass BeadsBorosilicate glass beads are highly resistant to liquid and vapor attacks hot or cold. May be used for mixing beads boiling stones and packing for distillation columns. 5500 x 4mm diameter. (1 per EA )
    Learn More
    was $427.36 Special Price $407.10
  15. Test Tube 25 ml
    Manufacturer: Kimble Chase
    Tubes Test Graduated with Flat Head [standard taper] Stopper Cap. (mL) 25. [standard taper] Joint 16. Graduations x Subdiv. (mL) 0-25 x 0.5. Approx. O.D. x Height (mm) 19 x 177 Graduated round bottom tube with a solid flat head [standard taper] stopper. (1 per EA)
    Learn More
    was $92.85 Special Price $90.51
  16. Condenser West 200mm
    Manufacturer: Kimble Chase
    West Condenser 285mm. Condenser is ideal for refluxing and distillation assemblies. Condensate is not held up with this design. #1 hose connections. 19/22 standard taper joint. 200mm jacket length. 66cm2 area. (1 per EA)
    Learn More
    $153.49
  17. Tube,Viscometer,Cannon-Fenske,Size 200
    Manufacturer: Kimble Chase
    KIMAX Cannon-Fenske Viscometer Tube Serialized. Uncalibrated. For obtaining kinematic viscosities of transparent liquids (ASTM Method of Test D445). Viscosity ranges for an efflux time greater than 200 seconds. ASTM size: 200. Kinematic viscosity range: 20-100mm/second. Constant: 0.1. (1 per EA)
    Learn More
    was $385.11 Special Price $368.31
  18. Tube,Dct,Borosilicate,10X75mm
    Manufacturer: Kimble Chase
    KIMAX Culture Tube Disposable. Borosilicate Glass. Features smooth top and bottom to prevent cuts. Annealed to reduce breakage along stress points. Supplied in shrink wrapped trays to eliminate breaking and contamination. Sizemm: 10x75. Volume: 4ml. (1000 per CS )
    Learn More
    was $133.29 Special Price $59.21
  19. Valve Lo Hold Up Size 4
    Manufacturer: Kimble Chase
    Valves Straight Low Hold Up without Tip O-Ring PTFE Plug HI-VAC Bore Range (mm) 0-4. Approx. Stem O.D. (mm) 9. O-Ring Size 010 Sidearms are bent to minimize liquid holdup that would occur in conventional valves. PTFE shaft seals protect the Viton o-rings from contact with the system. (1 per EA)
    Learn More
    was $68.07 Special Price $67.41
  20. Tube,Nessler,Low,Unmatch,50ml
    Manufacturer: Kimble Chase
    Tubes Color Comparison Low Form Nessler (Unmatched) Grad. at (mL) 50. Approx. O.D. and Height (mm) 25 x 175. Scale Length (mm) 125-136 With the Shadowless Bottom feature. Rings and legend are durable white ceramic enamel. Rings coincide with specific volumes of liquid. (6 per CS )
    Learn More
    was $202.83 Special Price $198.84
  21. Tube,Nessler,Apha,Unmatch,100ml
    Manufacturer: Kimble Chase
    KIMAX brand Nessler Color Comparison Tubes Tall Form Graduation lines and legends printed in white ceramic enamel. Feature Shadowless Bottoms that transmit undistorted light from a source beneath tube. Unmatched set of 12. Graduated at 100mL. Size: 24x375mm. Scale length: 275-295mm.
    Learn More
    was $301.88 Special Price $290.14
  22. Tube,Dct,Pp,Nat,12X75mm
    Manufacturer: Kimble Chase
    Tubes Plastic Culture Tube Disposable PP and PS Available in Five Colors Polypropylene Color Natural. Size (mm) 12 x 75 These non-sterile plastic culture tubes are ideal for use in routine laboratory procedures. (1000 per CS )
    Learn More
    was $87.58 Special Price $72.37
  23. Sulfites Apparatus Comp
    Manufacturer: Kimble Chase
    Distillation and Reactors Apparatus Monier-Williams Sulfites Flask Cap. (mL) 1000. Funnel Cap. (mL) 250. [standard taper] Joints 24/40. Hose Connections #2. Approx. (1 per EA)
    Learn More
    was $1,381.38 Special Price $1,356.67
  24. Valve Plug Size 4
    Manufacturer: Kimble Chase
    Valves Straight with Tip O-Ring PTFE Plug HI-VAC PFTE Plug Size 4 For vacuum applications up to 5 x 10-7 Torr. Designed with a precision external thread for fine control. This valve can be used as a bleed up to 1/2 a turn. Full open position is at 1 1/2 turns. (1 per EA)
    Learn More
    was $34.77 Special Price $34.40
Filters
Set Descending Direction

186 items

Page
per page
View as List Grid