Sealing Film

Plate roller assures a secure uniform seal around all wells on 96-well, 384-well, and 1536-well plates. (1 per EA)

Foil Sealing Film (50µm thickness) reduces sample evaporation, can be pierced easily with pipette tips & automation, and is heat and cold resistant Recommended use for temperature range -80°C to 120°C (100 per CS)

Sterile. AeraSeal features a hydrophobic, gas permeable membrane with a medical grade, non-cytotoxic adhesive. The porous membrane consists of layers of heat welded rayon fibers. Pore size from 10µm to 50µm. Moisture vapor transmission rate = 4,200g/m²/24hr. Easy-to-pierce with serological pipets and pipet tips for direct sample recovery. Available in roll format for automation: AeraSeal Roll-Seal. (50 per PK)

eXTReme Seal Film, 2 Rolls (Refill) Non-Sterile, 80 sheets/roll (2 per RL)

eXTReme Seal Kit includes dispenser plus 2 rolls of film that features an extra-strong thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate. Environmentally friendly; no paper liner to remove and discard. Each sheet is separated by an adhesive-free, perforated, color-coded blue band. The smooth lower surface of the dispenser can be used to seal the film to the plate. Replacement rolls can be easily installed by releasing the locking clasps on the dispenser Certified DNase- & RNase- free. Non-Sterile (1 per EA)

Unique design for maximum safety Store, dispense, and cut Parafilm®, tape, labels, and Tough-Tags®. ABS plastic dispenser designed with a safety razor that slides and cuts with no danger to fingers. Supplied with two easily exchanged cutting blades. Dispenser holds one or two 50 mm (2-inch) rolls, or one 100 mm (4-inch) roll Parafilm® is a registered trademark of Bemis Company, Inc. (1 per EA)

PetriSeal™ stretches and conforms to form a tight seal and is temperature resistant, waterproof and chemically resistant. It resists abrasion and puncture and blocks vapor loss while reducing the rate of gas exchange. Use PetriSeal™ with microtiter plates, Petri dishes and culture plates to prevent to entry of contaminants. The seal remains flexible down to -30°C and can withstand continuous exposure from -40°C to +77°C (with intermittent exposure up to 100°C). Tests have shown that PetriSeal™ leaves no adhesive residue even after two years. Tensile: 10lbs/ in width Adhesion: 28 oz/ in width Operating Temperature: -40°C - 77°C Application Temperature: 10°C-77°C Material Thickness: 4.5 mil Total Thickness: 5.5 mil Elongation: Color- 390% Clear:350% (1 per EA)

An alternative to the plate roller for pressing films to assure a secure uniform seal around all wells on 96-well, 384-well, and 1536-well plates. These paddles are recommeded for sealing films on raised rim plates. (5 per PK)

Parafilm Strips 2 x 8", Sterile (10 per PK )

Nest adhesive sealing film minimizes evaporation in a wide range of temperatures in storage applications. Nest adhesive sealing film minimizes evaporation in a wide range of temperatures in storage applications. (100 per CS )

PCR Sealing Film, Aluminum Foil, Adhesive, Pierceable, Sterile, 10 bags of 10 seals, 100/pk (100 per PK )

HyperStretch™ Multi-Purpose Laboratory Sealing Film, Paraffin/Polyolefin, 125ft of 4in Sealing Film, 1 Roll (1 per EA )

48 well round well Sillicone Sealing Mat, for Nest 3.5 ml 48-Well Deep Well Plate 504102 and 504162, pierceable, non-sterile, 10/pk, 50/cs (50 per CS )

Heat Seal Peelable Roll 610m x 77.5mm (1 per RL)

Heat Seal Peelable Roll 500m x 115mm (1 per RL)

Sterile. Excellent chemical resistance (e.g. DMSO). Universal fit for use with all plate types (e.g. flat-top and raised-rim). The smaller dimensions and rounded corners result in no plate overhang for robotics applications. 2.0mil aluminum foil minimizes shredding during removal; ideal for cold storage. Conformable foil allows visual verification of seal security around each well. Pierceable with a pipet tip or robotic probe for direct sample recovery. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. Removes easily and cleanly from plate surfaces. Features a single end-tab with perforations for ease of handling, application and removal. (50 per PK)

ThermalSeal RTS provides an extremely strong seal to minimize evaporation.. Features a pressure-activated, non-tacky, silicone adhesive. The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. Certified DNase- & RNase- free. Chemically resistant to DMSO, acetonitrile, and methanol. Ideal for use with flat-top, raised-rim and non-skirted PCR plates. High optical clarity and low auto-fluorescence. (50 per PK)

ThermalSeal features a moderate strength adhesive for ease of removal. Certified DNase- & RNase- free. Only recommended for structurally rigid polypropylene PCR plates that don’t warp. A less rigid polypropylene film that minimizes aerosols upon removal. Features good chemical resistance. (100 per PK)

OptiWell™ Sealing Mat, 24 Well, Silicone, 50/PK (50 per PK )

Heat Seal Pierceabale, Foil 500m x 115mm (1 per RL)

ThermalSeal RTS provides an extremely strong seal to minimize evaporation.. Features a pressure-activated, non-tacky, silicone adhesive. The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. Certified DNase- & RNase- free. Chemically resistant to DMSO, acetonitrile, and methanol. Ideal for use with flat-top, raised-rim and non-skirted PCR plates. High optical clarity and low auto-fluorescence. (25 per PK)

The SealMate SealPlate Starter Kit features a re-usable dispenser and two sterile rolls of perforated ?lm. The dispenser facilitates the quick and easy dispensing of ?lm from a roll allowing microplates to be sealed three times faster than using sheeted ?lms, while protecting unused seals from contamination. Cost-e?ective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes ?lm contamination. (500 per RL)

eXTReme FoilSeal is an aluminum foil seal that offers excellent chemical resistance and superior performance in ultra-low temperatures.The smaller dimensions and chamfered corners result in no plate overhang for robotics applications; universal fit for use with all plate types (e.g. raised-rim and non-skirted). Certified DNase- & RNase- free. Recommended for -80°C long-term storage. Excellent chemical resistance (e.g. DMSO). Specially formulated adhesive provides an excellent seal to minimize evaporation and well-to-well contamination. Pierceable with a pipet tip for direct sample recovery. Not recommended for PCR. (100 per PK)

Black and white film is suitable for application on the top or bottom of black and white multiple well plates Easily cover clear bottom black or white plates to prepare for top-reading analytical equipment Black film absorbs stray light and fluorescence, dampening background noise and improving signal clarity White film reflects weak light and fluorescent signals to enhance output readings Place black film on top of black plates to fully shield light-sensitive samples (50 per CS )