Sealing Film

Plate roller assures a secure uniform seal around all wells on 96-well, 384-well, and 1536-well plates. (1 per EA)

Sterile. AeraSeal features a hydrophobic, gas permeable membrane with a medical grade, non-cytotoxic adhesive. The porous membrane consists of layers of heat welded rayon fibers. Pore size from 10µm to 50µm. Moisture vapor transmission rate = 4,200g/m²/24hr. Easy-to-pierce with serological pipets and pipet tips for direct sample recovery. Available in roll format for automation: AeraSeal Roll-Seal. (50 per PK)

eXTReme Seal Film, 2 Rolls (Refill) Non-Sterile, 80 sheets/roll (2 per RL)

eXTReme Seal Kit includes dispenser plus 2 rolls of film that features an extra-strong thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate. Environmentally friendly; no paper liner to remove and discard. Each sheet is separated by an adhesive-free, perforated, color-coded blue band. The smooth lower surface of the dispenser can be used to seal the film to the plate. Replacement rolls can be easily installed by releasing the locking clasps on the dispenser Certified DNase- & RNase- free. Non-Sterile (1 per EA)

An alternative to the plate roller for pressing films to assure a secure uniform seal around all wells on 96-well, 384-well, and 1536-well plates. These paddles are recommeded for sealing films on raised rim plates. (5 per PK)

Heat Seal Peelable Roll 610m x 77.5mm (1 per RL)

Heat Seal Peelable Roll 500m x 115mm (1 per RL)

Sterile. Excellent chemical resistance (e.g. DMSO). Universal fit for use with all plate types (e.g. flat-top and raised-rim). The smaller dimensions and rounded corners result in no plate overhang for robotics applications. 2.0mil aluminum foil minimizes shredding during removal; ideal for cold storage. Conformable foil allows visual verification of seal security around each well. Pierceable with a pipet tip or robotic probe for direct sample recovery. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. Removes easily and cleanly from plate surfaces. Features a single end-tab with perforations for ease of handling, application and removal. (50 per PK)

ThermalSeal RTS provides an extremely strong seal to minimize evaporation.. Features a pressure-activated, non-tacky, silicone adhesive. The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. Certified DNase- & RNase- free. Chemically resistant to DMSO, acetonitrile, and methanol. Ideal for use with flat-top, raised-rim and non-skirted PCR plates. High optical clarity and low auto-fluorescence. (50 per PK)

ThermalSeal features a moderate strength adhesive for ease of removal. Certified DNase- & RNase- free. Only recommended for structurally rigid polypropylene PCR plates that don’t warp. A less rigid polypropylene film that minimizes aerosols upon removal. Features good chemical resistance. (100 per PK)

Heat Seal Pierceabale, Foil 500m x 115mm (1 per RL)

ThermalSeal RTS provides an extremely strong seal to minimize evaporation.. Features a pressure-activated, non-tacky, silicone adhesive. The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. Certified DNase- & RNase- free. Chemically resistant to DMSO, acetonitrile, and methanol. Ideal for use with flat-top, raised-rim and non-skirted PCR plates. High optical clarity and low auto-fluorescence. (25 per PK)

The SealMate SealPlate Starter Kit features a re-usable dispenser and two sterile rolls of perforated ?lm. The dispenser facilitates the quick and easy dispensing of ?lm from a roll allowing microplates to be sealed three times faster than using sheeted ?lms, while protecting unused seals from contamination. Cost-e?ective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes ?lm contamination. (500 per RL)

eXTReme FoilSeal is an aluminum foil seal that offers excellent chemical resistance and superior performance in ultra-low temperatures.The smaller dimensions and chamfered corners result in no plate overhang for robotics applications; universal fit for use with all plate types (e.g. raised-rim and non-skirted). Certified DNase- & RNase- free. Recommended for -80°C long-term storage. Excellent chemical resistance (e.g. DMSO). Specially formulated adhesive provides an excellent seal to minimize evaporation and well-to-well contamination. Pierceable with a pipet tip for direct sample recovery. Not recommended for PCR. (100 per PK)

ThermalSeal 2 and ThermalSeal Advanced feature a soft, extra thick, conformable adhesive that forms a very strong seal around raised wells to minimize evaporation and cross-contamination. Certified DNase- & RNase- free. Ideal for use with flat-top, semi-skirted and full-skirted PCR plates. Compatible with hard-shell dual component (e.g. polycarbonate/polypropylene) PCR plates. Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering. (100 per PK)

Non-Sterile. General Purpose polypropylene films offer superior barrier properties to minimize evaporation and prevent well-to-well contamination. Certified DNase- & RNase- free. Features good chemical resistance. Less rigid polypropylene film reduces aerosols upon removal. Specially formulated adhesive minimizes plate residue. Can be used as a temporary seal while awaiting further processing. (100 per PK)

Roll-Seal AeraSeal features a hydrophobic, gas permeable membrane with a medical grade, non-cytotoxic adhesive. The porous membrane consists of layers of heat welded rayon fibers. Pore size from 10µm to 50µm. Moisture vapor transmission rate = 4,200g/m²/24hr. Easy-to-pierce with serological pipets and pipet tips for direct sample recovery. Available in roll format for automation: AeraSeal Roll-Seal. (1 per EA)

AlumaSeal provides a secure seal for well plates to minimize evaporation, reduce cross-contamination and prevent spillage. Certified DNase- & RNase- free. Ideal for use with 384-well and deep-well plates or select AlumaSeal® 96™ for smaller cut for raised-rim and non-skirted PCR plates. Features one end-tab with no perforation. Pierceable with a pipet tip or robotic probe for direct sample recovery. Large cut allows for easier positioning of the foil to the plate via edge of plate alignment vs. centering. A complimentary sealing paddle is included in each AlumaSeal® 96™ box. Available in roll format for automation. (100 per PK)

Provides pierceablity with single-channel pipet tips, probes and needles. (100 per PK)

Pre-scored ?lm in a convenient, easy to use roll format. Self-standing, non-slip supports hold the pre-scored ?lm roll securely in place for quick and easy bench top dispensing. Rigid polyester ?lm features good clarity and easy handling. Can be used as a temporary seal while awaiting further processing (200 per PK)

ThermalSeal RT2 sealing films combine an optically transparent polyester sealing film with a very strong, ultra-smooth, and highly conformable adhesive. Designed for use with standard 96-well plates where rows must be selectively protected or accessed. Certified DNase- & RNase- free. Ultra-high optical clarity. Features a soft conformable adhesive which forms a very strong seal around raised wells to minimize evaporation and cross-contamination. Ideal for use with flat-top and hard-shell dual component (e.g. polycarbonate / polypropylene) PCR plates. Not recommended for removal after thermal cycling. Non-Sterile. (100 per PK)

AeraSeal features a hydrophobic, gas permeable membrane with a medical grade, non-cytotoxic adhesive. The porous membrane consists of layers of heat welded rayon fibers. Pore size from 10µm to 50µm. Moisture vapor transmission rate = 4,200g/m²/24hr. Easy-to-pierce with serological pipets and pipet tips for direct sample recovery. Available in roll format for automation: AeraSeal Roll-Seal. (100 per PK)

ThermalSeal RT2 sealing films combine an optically transparent polyester sealing film with a very strong, ultra-smooth, and highly conformable adhesive. Designed for use with standard 96-well plates where rows must be selectively protected or accessed. Certified DNase- & RNase- free. Ultra-high optical clarity. Features a soft conformable adhesive which forms a very strong seal around raised wells to minimize evaporation and cross-contamination. Ideal for use with flat-top and hard-shell dual component (e.g. polycarbonate / polypropylene) PCR plates. Not recommended for removal after thermal cycling. Non-Sterile. (100 per PK)

X-Pierce film is designed for short-term processing and storage of samples that require multiple access to wells by pipet tips or robotic probes. Provides easy access without pipet tip coring or adhesive fouling. A pre-cut “X” over each well creates bendable flaps that provide sample access without coring or adhesive fouling of tips or probes. Ideal for COVID-19 sample collection in deep-well plates using swabs. Printed circles aid in the alignment of the film to the plate. Printed alphanumerics identify each well of a 96-well plate. Non-Sterile. (100 per PK)