This category covers static inline mixers, which blend two or more fluids as they flow through a pipe or tube using fixed mixing elements, with no moving parts or power. Products are mainly Koflo static mixers. There are disposable mixers with 12 to 48 elements, pipe IDs from 1/8 to 1/2 inch, and plain or NPT end connections, plus gray threaded PVC mixers. Replacement polyacetal mixing elements are also sold on their own, to fit into your own tubing. They are used for blending buffers, reagents, chemical feeds and process streams, including in chromatography setups.
Size the mixer to your line: match the pipe ID and choose an end connection (plain for tubing or bonding, NPT for threaded fittings). More elements give more thorough mixing but add pressure drop, so fluids that mix poorly or flow at low velocity usually need more elements or a longer mixer. Confirm the housing and element materials are compatible with your fluids and temperatures, and check the pressure rating on the specification sheet rather than relying on the listing.
An inline mixer, also called a static mixer, is a tube or pipe section containing fixed elements that repeatedly divide, turn and recombine the flow, so two or more liquids blend as they pass through. It has no moving parts and needs no power, only the pressure of the flowing liquid. Inline mixers are used for blending chemicals, buffers, dosing feeds and process streams.
It depends on how hard the fluids are to mix. Fluids with similar viscosity that flow fast and turbulently can blend well with only a few elements, while viscous fluids, very different flow rates or laminar flow need more elements or a longer mixer. More elements also add pressure drop. Manufacturers' sizing guides relate element count to flow rate, viscosity and the mixing quality you need.
Yes. Inline static mixers are commonly used to blend buffers or solvent streams before they reach a chromatography column, for example when two pumps form a gradient. For this use, check that the mixer's internal volume is suitable for your flow rate, since a large mixer volume can delay or smooth gradient changes, and that all wetted materials are compatible with your buffers and cleaning solutions.
Disposable mixing elements are the mixing inserts sold without a housing. You place them inside your own tube or pipe of matching inside diameter, then discard and replace them when they become fouled or contaminated, rather than cleaning them. They are useful for adhesives, resins and other materials that would cure or build up inside a reusable mixer.
Related categories: Shaker Parts · Shakers · Homogenizers and Grinders · Vortex Mixer Parts · Vortex Mixers · Overhead Stirrer Parts · Overhead Stirrers · All Mixing
Top brands: Koflo
Popular Inline Mixers: