Sealing Film

Acrylic parafilm dispenser provides dust-free storage and serrated cutting surface for easy dispensing of 4” Parafilm® rolls. (1 per EA)

Unique design for maximum safety Store, dispense, and cut Parafilm®, tape, labels, and Tough-Tags®. ABS plastic dispenser designed with a safety razor that slides and cuts with no danger to fingers. Supplied with two easily exchanged cutting blades. Dispenser holds one or two 50 mm (2-inch) rolls, or one 100 mm (4-inch) roll Parafilm® is a registered trademark of Bemis Company, Inc. (1 per EA )

OptiWell™ Sealing Mat, 96 Round Well, Black Alphanumeric Printing, Silicone, "-" Opening, Ø5.5mm, 50/PK (50 per PK )

qPCR Sealing Film, Optically Clear, Standard Adhesive, Sterile, 10 bags of 10 seals, 100/pk (100 per PK )

Sealing Film w Color Tabs for ELISA & Storage, Polyester, 5pk of 10 (10 per PK)

Easily retrieve individual well samples without removing or puncturing sealing film Pre-cut flaps over each well allow easy manual or robotic pipette tip entry without the risk of adhesive residue contamination Flaps self-seal after pipette tip is removed, ideal for short-term storage of precious samples Boldly printed alignment circles ensure accurate film placement on standard 96 well plates Each well is individually alphanumerically labeled (50 per CS )

qPCR Sealing Film, Optically Clear, Standard Adhesive, Sterile, 10 bags of 10 seals, 100/pk (2000 per CS )

ThermalSeal RTS provides an extremely strong seal to minimize evaporation.. Features a pressure-activated, non-tacky, silicone adhesive. The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. Certified DNase- & RNase- free. Chemically resistant to DMSO, acetonitrile, and methanol. Ideal for use with flat-top, raised-rim and non-skirted PCR plates. High optical clarity and low auto-fluorescence. (100 per PK)

Certified DNase- & RNase- free. Large cut is designed for greater coverage; results in a more complete seal around the edges of the plate which can reduce evaporation rates. Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering. 2mil clear polyester film will not tear upon removal. An extra strong, thick adhesive minimizes evaporation and well-to-well contamination. Removes easily and cleanly from plate surfaces. Features two removable end-tabs with perforations for ease of handling, application and removall (100 per PK)

AlumaSeal II is a soft non-permeable aluminum foil with a strong, medical-grade acrylic adhesive. Easy-to-pierce for direct sample recovery. Has less tendency to roll back on itself when removing the backing paper. Certified DNase- & RNase- free. Excellent chemical resistance (e.g. DMSO). Easily pierceable with single or multichannel pipettors and robotic probes. 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well. (100 per PK)

Solvent Resistance: Moderate, Temp. Range °C: -80 to 110, Plate Type: PP, Application: PCR, good liquid barrier, low temp short term compound storage, can be re-sealed (5 per PK)

Roll Seal. AlumaSeal provides a secure seal for well plates to minimize evaporation, reduce cross-contamination and prevent spillage. Certified DNase- & RNase- free. Ideal for use with 384-well and deep-well plates or select AlumaSeal® 96™ for smaller cut for raised-rim and non-skirted PCR plates. Features one end-tab with no perforation. Pierceable with a pipet tip or robotic probe for direct sample recovery. Large cut allows for easier positioning of the foil to the plate via edge of plate alignment vs. centering. A complimentary sealing paddle is included in each AlumaSeal® 96™ box. Available in roll format for automation. (1 per EA)

Sterile. AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films. With a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the sealing film as it lays on the plate to avoid curling. Dimensions are 82.6 by 132.6 mm, including the single 9.5 mm end tab. AlumaSeal CS sealing films are certified DNase-, RNase-, and nucleic-acid-free. Specially formulated for cold storage to -80 °C. Excellent barrier properties to retard evaporation. Easily pierceable with pipet tips or robotic probes for sample recovery. (50 per PK)

96 Well ELISA Plate, Undetachable, High Binding, Black, Non-sterile, 5/pk, 50/cs (50 per CS )

ThermalSeal 2 and ThermalSeal Advanced feature a soft, extra thick, conformable adhesive that forms a very strong seal around raised wells to minimize evaporation and cross-contamination. Certified DNase- & RNase- free. Ideal for use with flat-top, semi-skirted and full-skirted PCR plates. Compatible with hard-shell dual component (e.g. polycarbonate/polypropylene) PCR plates. Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering. (100 per PK)

Self-adhesive sealing film, gas-permeable, sterile,bag of 50 (50 per PK)

Heat Seal Pierceabale, Foil 610m x 77.5mm (1 per RL)

Non-Sterile. AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films. With a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the sealing film as it lays on the plate to avoid curling. Dimensions are 82.6 by 132.6 mm, including the single 9.5 mm end tab. AlumaSeal CS sealing films are certified DNase-, RNase-, and nucleic-acid-free. Specially formulated for cold storage to -80 °C. Excellent barrier properties to retard evaporation. Easily pierceable with pipet tips or robotic probes for sample recovery. (100 per PK)

Zone-Free™, 384 Well, CS/50 (50 per CS)

BrightMax is a white, light-reflecting, vinyl film that can be applied to either the top or bottom of the white plate. The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers. Maximizes intensity and signal-to-noise ratios in luminescence assays. May be used as a backing matrix for microscopy of punchout samples for filter plates (e.g. ELISPOT assays). Features a single split liner for easy application. (50 per PK)

ThermalSeal RTS provides an extremely strong seal to minimize evaporation.. Features a pressure-activated, non-tacky, silicone adhesive. The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. Certified DNase- & RNase- free. Chemically resistant to DMSO, acetonitrile, and methanol. Ideal for use with flat-top, raised-rim and non-skirted PCR plates. High optical clarity and low auto-fluorescence. (1 per EA)

Sterile. For color-coding and plate identification, link below to SealPlate ColorTab films. SealPlate minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells). Provides a secure seal and is easy to remove. Rigid polyester film features good clarity and easy handling. Can be used as a temporary economical seal while awaiting further processing. Features two end-tabs with perforations. (100 per PK)

Excellent chemical resistance (e.g. DMSO). Universal fit for use with all plate types (e.g. flat-top and raised-rim). The smaller dimensions and rounded corners result in no plate overhang for robotics applications. 2.0mil aluminum foil minimizes shredding during removal; ideal for cold storage. Conformable foil allows visual verification of seal security around each well. Pierceable with a pipet tip or robotic probe for direct sample recovery. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. Removes easily and cleanly from plate surfaces. Features a single end-tab with perforations for ease of handling, application and removal. (100 per PK)

Minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells). Rigid polyester film features good clarity and easy handling. Can be used as a temporary economical seal while awaiting further processing Features two end-tabs with perforations. (100 per PK)