Sealing Film

Sterile refill roll. Ideal for use under the hood; the SealMate dispenser minimizes film contamination. Each sheet is separated by an adhesive-free, perforated, color-coded red band. Designed to facilitate air and CO2 exchange. Pore size from 10µm to 50µm. Moisture vapor transmission rate = 4,200g/m²/24hr. Easy-to-pierce with serological pipets and pipet tips for direct sample recovery. (2 per RL)

For sample identification and plate labeling. Each end-tab features a colored dot and white wring area. An inscribed color-coded end-tab can be removed and pasted into a laboratory notebook while the other remains on the plate for identification. The film sheet can be removed from the plate without disturbing the identification label due to the finely perforated end-tabs. Provides a secure seal and is easy to remove. Rigid polyester film features good clarity and easy handling. Features two end-tabs with perforations. Non-sterile. (100 per PK)

For sample identification and plate labeling. Each end-tab features a colored dot and white wring area. An inscribed color-coded end-tab can be removed and pasted into a laboratory notebook while the other remains on the plate for identification. The film sheet can be removed from the plate without disturbing the identification label due to the finely perforated end-tabs. Provides a secure seal and is easy to remove. Rigid polyester film features good clarity and easy handling. Features two end-tabs with perforations. Non-sterile. (100 per PK)

ValueSeal features smaller dimensions and a single non-perforated end-tab to provide a more cost-effective alternative to protect samples from evaporation, external contamination, dust and particulates. Rigid polyester film features good clarity and easy handling. Can be used as a temporary seal while awaiting further processing. (100 per PK)

ThermalSeal MiniStrips sealing films are identical to ThermalSeal sealing films, but designed for sealing only one or two 8-well rows at a time on PCR plates or strip tubes. They are now supplied in convenient sheets of four. Each sealing film strip is 19.0 x 97.3 mm, including two removable positioning tabs. (200 per PK)

The SealMate SealPlate Starter Kit features a re-usable dispenser and two rolls of perforated ?lm. The dispenser facilitates the quick and easy dispensing of ?lm from a roll allowing microplates to be sealed three times faster than using sheeted ?lms, while protecting unused seals from contamination. Cost-e?ective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes ?lm contamination. (1 per EA)

AeraSeal™ SealMate™ Starter Kit, SealMate Dispenser + 2 Rolls of Sterile AeraSeal, 50 Sheets/Roll (1 per EA)

For sample identification and plate labeling. Each end-tab features a colored dot and white wring area. An inscribed color-coded end-tab can be removed and pasted into a laboratory notebook while the other remains on the plate for identification. The film sheet can be removed from the plate without disturbing the identification label due to the finely perforated end-tabs. Provides a secure seal and is easy to remove. Rigid polyester film features good clarity and easy handling. Features two end-tabs with perforations. Non-sterile. (100 per PK)

For pierceablity with single-channel pipet tips, probles and needles. Sterile. (100 per PK)

AeraSeal™ SealMate™ Starter Kit, SealMate Dispenser + 2 Rolls of Non-Sterile AeraSeal, 50 Sheets/Roll (1 per EA)

Aluminum Sealing Film, Automation/Storage, DNase, RNase free, 100 Sheets (100 per CS)

Solvent Resistance: Good, DMSO, Temp. Range °C: -20 to 120, Plate Type: PP, PS, Application: PCR, compound storage, sample shipping (5 per PK)

Optically clear sealing film for qPCR, PIERCEABLE for most plate types, PP, PC, PE, etc., 100/pk (100 per PK)

qPCR Sealing Film, Optically Clear, Non-Tacky Pressure Activated Adhesive, Sterile, 10 bags of 10 seals, 100/pk (100 per PK )

OptiWell™ Sealing Mat, 24 Well, Silicone, Sterile, 50 / PK (50 per PK )

Black and white film is suitable for application on the top or bottom of black and white multiple well plates Easily cover clear bottom black or white plates to prepare for top-reading analytical equipment Black film absorbs stray light and fluorescence, dampening background noise and improving signal clarity White film reflects weak light and fluorescent signals to enhance output readings Place black film on top of black plates to fully shield light-sensitive samples (50 per CS )

Foil Sealing Film (50µm thickness) reduces sample evaporation, can be pierced easily with pipette tips & automation, and is heat and cold resistant Recommended use for temperature range -80°C to 120°C (50 per CS)

OptiWell™ Sealing Mat, 96 Round Well, Black Alphanumeric Printing, Silicone, "+" Opening, Ø7.3mm, Printed 50 / PK (50 per PK )

Clear Sealing Film is optically clear with low auto-fluorescence, ideal for qPCR applications Pressure-activated adhesive is non-tacky and creates a strong bond when applied with a sealing paddle or roller Non-activated portions remain non-tacky, making this film suitable for dry samples (25 per CS )

OptiWell™ Sealing Mat, 96 Square Well, Black Alphanumeric Printing, Silicone, Sterile, Printed, "-" Opening, Ø8.4mm, 50 / PK (50 per PK )

PCR Sealing Film Strips, PE, 1 x8 Rows per Strip, 8 Strips per Sheet (50 per PK)

PCR Sealing Film, Aluminum Foil, Adhesive, Pierceable, Sterile, 10 bags of 10 seals, 100/pk (2000 per CS )

OptiWell™ Sealing Mat, 384 Square Well, Silicone, Sterile, 50 / PK (50 per PK )

Clear Sealing Film, Non-sterile, CS100 (100 per CS )