This category covers reusable glass apparatus for teaching, research and quality control labs. It includes test tubes in light-wall, rimless, side-arm and screw-cap styles (bakelite caps with rubber liners), graduated glass centrifuge tubes with stoppers or screw caps, crystallizing dishes, glass Petri dishes, evaporating basins, calibrated pycnometers, 300 mL B.O.D. bottles, and ground-joint pieces such as Claisen, vacuum, reducing and expansion adapters and stoppers. Larger setups include Soxhlet extraction apparatus, Kjeldahl distillation sets, water-jacketed flasks, distillation apparatus and organic chemistry glassware kits, plus porcelain and plastic spot plates.

Check the glass type first: borosilicate handles heating and temperature changes far better than soda glass. Match ground-joint sizes exactly, such as 24/40 or 29/42, so adapters, stoppers and flasks fit. Compare capacity, dimensions, wall thickness, graduation or calibration, closure type and pack quantity, and confirm the speed rating before using glass tubes in a centrifuge.

Reusable Glassware: common questions

What is a crystallizing dish used for?

A crystallizing dish is a shallow, flat-bottomed glass dish with straight sides. It is used to evaporate solutions so crystals can form, and also as a water or ice bath, a cover dish, or a container for holding small items. Borosilicate dishes can be heated gently, and versions with a spout make pouring easier.

When should I use glass centrifuge tubes instead of plastic?

Glass centrifuge tubes are chosen for organic solvents that attack plastics, for work where plastic leachables could interfere, and when tubes will be cleaned and reused. They can break under high forces, so use them only within the speed or g-force rating given by the maker, with properly fitting adapters or cushions in the rotor.

What does 24/40 mean on lab glassware?

24/40 is a standard taper ground-glass joint size. The first number is the approximate diameter in millimeters at the wide end of the joint, and the second is the length of the ground section in millimeters. Male (cone) and female (socket) joints with the same numbers fit together, and reducing or expansion adapters connect different sizes.

What is the difference between borosilicate and soda-lime glass?

Borosilicate glass has low thermal expansion, so it tolerates heating and rapid temperature changes much better than soda-lime glass and is more resistant to chemical attack. Soda-lime glass costs less and is used for items that are not heated, such as some jars and display pieces. For heating, autoclaving or flame work, choose borosilicate.

Reusable Glassware

Filters
Set Descending Direction

186 items

Page
per page
View as List Grid
  1. Stopper,PE,Size 16
    Manufacturer: Kimble Chase
    Polyethylene Stopper Polyethylene linear high-density stoppers fit Neck Ground to [standard taper] Stopper size 16. Yellow and blue with a closed bottom. Enlarged flange is designed to protect the neck if the glassware item is tipped over. 6 stoppers per case.
    Learn More
    was $45.34 Special Price $43.61
  2. Distillation Receiver Bw
    Manufacturer: Kimble Chase
    Distilling Receiver Cow type distillation receiver for use with Short Path Distillation Apparatus (KT284800-0000). (1 per EA)
    Learn More
    was $308.16 Special Price $303.33
  3. Tube,Nessler,Low,Unmatch,100ml
    Manufacturer: Kimble Chase
    Tubes Color Comparison Low Form Nessler (Unmatched) Grad. at (mL) 100. Approx. O.D. and Height (mm) 32 x 200. Scale Length (mm) 145-158 With the Shadowless Bottom feature. Rings and legend are durable white ceramic enamel. Rings coincide with specific volumes of liquid. (6 per CS )
    Learn More
    was $243.38 Special Price $233.89
  4. Tube,Nessler,Apha,Unmatch,50-100ml
    Manufacturer: Kimble Chase
    KIMAX brand Nessler Color Comparison Tubes Tall Form Unmatched set of 12. 50mL. Graduated at 50 100mL. Shadowless bottoms transmit undistorted light. 24x375mm. Scale length: 275-295mm. Mentioned by APHA in Standard Wastewater/water Examination Methods. Designed from NNN-T-175 Type 1 Class 2.
    Learn More
    was $339.87 Special Price $326.67
  5. Adapter Gas Inlet 24/40
    Manufacturer: Kimble Chase
    Adapters Inlet with Hose Connection [standard taper] Joint 24/40. Hose Connection #2. Tube Length (mm) 250. Approx. Overall Height (mm) 355 With two side hose connectors for venting or introducing gas/vacuum into a system. (1 per EA)
    Learn More
    $109.81
  6. Adapter Gas Inlet 14/20
    Manufacturer: Kimble Chase
    AIRLESS-WARE Gas Inlet Adapter Gas inlet adapter with inner standard taper 14/20 joint. Supplied with glass plug and patented pressure/vacuum retainer. 98H x 60W mm. (1 per EA)
    Learn More
    $137.83
  7. Stopper,PE,Size 27
    Manufacturer: Kimble Chase
    Polyethylene Stopper Polyethylene linear high-density stoppers fit Neck Ground to [standard taper] Stopper size 27. Yellow and blue with a closed bottom. Enlarged flange is designed to protect the neck if the glassware item is tipped over. 6 stoppers per case.
    Learn More
    was $57.03 Special Price $54.90
  8. Distillation Receiver Bw
    Manufacturer: Kimble Chase
    Distillation and Reactors Receiver Cow-Type [standard taper] Joints 14/20. [standard taper] Joint to Condenser 14/20. Hose Connection #1 Cow-type design having three receivers spaced 45 apart. (1 per EA)
    Learn More
    was $404.95 Special Price $402.92
  9. Trap Dispersion Tube
    Manufacturer: Kimble Chase
    Distillation and Reactors Apparatus Cyanide (D) Dispersion Tube Medium Porosity [standard taper] 19/38 Side [standard taper] 29/42 Lower This apparatus has been successfully used in the analysis of industrial waste waters saline and reagent grade water. (1 per EA)
    Learn More
    $282.06
  10. Evap Concentrator 250ml
    Manufacturer: Kimble Chase
    Kuderna-Danish Concentrators Ungraduated Concentrates trace amounts of sample dissolved in organic solvents. Useful in sample preparation before analysis with petroleum ether or hexane. Fast evaporation with low hold-up. Includes three-chamber column 250ml flask 10ml tube and polyacetal clamp. (1 per EA)
    Learn More
    was $490.36 Special Price $486.86
  11. Plug Only Ext Tip Size 2
    Manufacturer: Kimble Chase
    Valves Right Angle Extended Tip PTFE Plug HI-VAC PTFE Plug Size 2 Designed with a precision external thread for fine control. The accurately controlled valve seat and the extended tip on the PTFE plug allow semi-needle valve control for both liquids and gases. (1 per EA)
    Learn More
    $31.98
  12. Drying Tube
    Manufacturer: Kimble Chase
    Labsets kits Organic Chemistry Microscale Threaded Standard Academic MICROFLEX Item M Drying Tube 13-425 The 747000 Series MICROFLEX Kits feature versatile threaded chaste connections. They can be assembled rightside up or upside down providing great versatility. (1 per EA)
    Learn More
    $38.44
  13. Tube,Gas Collecting,250ml
    Manufacturer: Kimble Chase
    Gas Sampling Tube with PTFE LUBRIFLO Stopcock Capacity (mL) 250. Approx. O.D. (mm) 50. Approx. Length (mm) 330. [standard taper] Stopcock Size 4 KIMAX gas collecting tube with tubulations on each end of the tube that accept 5/16 inch I.D. flexible tubing for the 125 mL size and 3/8 inch I.D. (1 per EA)
    Learn More
    was $441.72 Special Price $424.32
  14. Tube,Test,Grad,10ml
    Manufacturer: Kimble Chase
    KIMAX Graduated Test Tube Reusable. Borosilicate Glass. With reinforced bead top. Features a scale in permanent brown stain. Size: 16x25mm. Volume: 10ml. Subdivisions: 0.1ml. (1 per EA)
    Learn More
    was $85.46 Special Price $80.93
  15. Impinger Midget Plain
    Manufacturer: Kimble Chase
    Gas Sampling Midget Impinger [standard taper] 24/40 Graduated Capacity (mL) 30. Graduations x Subdiv. (mL) 5-30 x 5. Approx. Overall Height (mm) 180 The midget impinger is almost identical in principle and design to the Greenburg-Smith impinger except for its smaller size. (1 per EA)
    Learn More
    was $152.64 Special Price $152.43
  16. Inlet Tube
    Manufacturer: Kimble Chase
    Distillation and Reactors Apparatus Cyanide (A) Inlet Tube [standard taper] 19/38 This apparatus has been successfully used in the analysis of industrial waste waters saline and reagent grade water. (1 per EA)
    Learn More
    was $84.64 Special Price $84.39
  17. Condenser Jacketed
    Manufacturer: Kimble Chase
    Condensers Liebig Condenser Micro Williamson Chaste Connections Approx. Overall Height (mm) 97 Liebig condenser has patented chaste connectors at the top and bottom. (1 per EA)
    Learn More
    $111.45
  18. Valve Plug Size 12
    Manufacturer: Kimble Chase
    Valves Straight without Tip O-Ring PTFE Plug HI-VAC PFTE Plug Size 4 Similar to 826500 but without tip o-ring exposure. For vacuum applications up to 5 x 10-7 Torr. Designed with a precision external thread for fine control. This valve can be used as a bleed up to 1/2 a turn. (1 per EA)
    Learn More
    was $54.23 Special Price $53.68
  19. Adapter Gas Inlet 24/40
    Manufacturer: Kimble Chase
    Inlet Adapter Used as a vent or for the introduction of pressure/vacuum. Hose standard taper 24/40 joint. No. 2 Hose Connection. Height: 80mm. (1 per EA)
    Learn More
    $67.56
  20. Stpk,Plug,3Way,PTFE,2mm
    Manufacturer: Kimble Chase
    PTFE Stopcock Plug Three-Way For KIMAX Reservoir (17456-182 -184 -186 -188) Class B Automatic Self-Zeroing (17550-061 -083 -108 -120) Class A Serialized/Certified (17527-081 -106 -128) Class B Shellbach (17454-705 -727) and Automatic Self-Zeroing Shellbach Burets (17552-158 -191). (6 per CS )
    Learn More
    was $1,098.83 Special Price $949.20
  21. Tube,Dct,Borosilicate,13X100mm
    Manufacturer: Kimble Chase
    KIMAX Culture Tube Disposable. Borosilicate Glass. Features smooth top and bottom to prevent cuts. Annealed to reduce breakage along stress points. Supplied in shrink wrapped trays to eliminate breaking and contamination. Sizemm: 13x100. Volume: 10ml. (1000 per CS )
    Learn More
    was $162.73 Special Price $85.64
  22. Distn App Short Path
    Manufacturer: Kimble Chase
    Short Path Distillation Apparatus Utilizes a thermometer bulb as column packing. Compact head and condenser. Cow type receiver for best product recovery. Pear shaped flask has [Standard Taper] 10/18 side arm for bleed tube. 14/20 [Standard Taper] joints. #1 Hose connections. 190Hx215Wmm. (1 per EA)
    Learn More
    $951.87
  23. Drying Tube 24/40
    Manufacturer: Kimble Chase
    Tubes Drying U-Shaped Full Length [standard taper] Joint [standard taper] Joint 24/40. Approx. Overall Height x Width (mm) 185 x 80 Inner joint at the bottom with a bulb desiccant chamber. Unit is supplied with a vent tube as illustrated. (1 per EA)
    Learn More
    $115.46
  24. Kimble 16X150 Boro Dct
    Manufacturer: Kimble Chase
    Tubes Culture Disposable Borosilicate Glass Size (mm) 16 x 150 Kimble round bottom culture tubes are available in borosilicate or flint glass. Tubes are annealed to reduce breakage along stress points and feature smooth tops and bottoms to prevent cuts.
    Learn More
    was $280.08 Special Price $146.42
Filters
Set Descending Direction

186 items

Page
per page
View as List Grid