This category covers reusable glass apparatus for teaching, research and quality control labs. It includes test tubes in light-wall, rimless, side-arm and screw-cap styles (bakelite caps with rubber liners), graduated glass centrifuge tubes with stoppers or screw caps, crystallizing dishes, glass Petri dishes, evaporating basins, calibrated pycnometers, 300 mL B.O.D. bottles, and ground-joint pieces such as Claisen, vacuum, reducing and expansion adapters and stoppers. Larger setups include Soxhlet extraction apparatus, Kjeldahl distillation sets, water-jacketed flasks, distillation apparatus and organic chemistry glassware kits, plus porcelain and plastic spot plates.

Check the glass type first: borosilicate handles heating and temperature changes far better than soda glass. Match ground-joint sizes exactly, such as 24/40 or 29/42, so adapters, stoppers and flasks fit. Compare capacity, dimensions, wall thickness, graduation or calibration, closure type and pack quantity, and confirm the speed rating before using glass tubes in a centrifuge.

Reusable Glassware: common questions

What is a crystallizing dish used for?

A crystallizing dish is a shallow, flat-bottomed glass dish with straight sides. It is used to evaporate solutions so crystals can form, and also as a water or ice bath, a cover dish, or a container for holding small items. Borosilicate dishes can be heated gently, and versions with a spout make pouring easier.

When should I use glass centrifuge tubes instead of plastic?

Glass centrifuge tubes are chosen for organic solvents that attack plastics, for work where plastic leachables could interfere, and when tubes will be cleaned and reused. They can break under high forces, so use them only within the speed or g-force rating given by the maker, with properly fitting adapters or cushions in the rotor.

What does 24/40 mean on lab glassware?

24/40 is a standard taper ground-glass joint size. The first number is the approximate diameter in millimeters at the wide end of the joint, and the second is the length of the ground section in millimeters. Male (cone) and female (socket) joints with the same numbers fit together, and reducing or expansion adapters connect different sizes.

What is the difference between borosilicate and soda-lime glass?

Borosilicate glass has low thermal expansion, so it tolerates heating and rapid temperature changes much better than soda-lime glass and is more resistant to chemical attack. Soda-lime glass costs less and is used for items that are not heated, such as some jars and display pieces. For heating, autoclaving or flame work, choose borosilicate.

Reusable Glassware

Filters
Set Descending Direction

186 items

Page
per page
View as List Grid
  1. Tube Conn T Shaped Sz 21
    Manufacturer: Kimble Chase
    Tubes Hose Connector T-Shaped Tube O.D. (mm) 8. Hose Connectors #1. Approx. Overall Width x Height (mm) 100 x 55 Useful in constructing manifolds or connecting apparatus. (1 per EA)
    Learn More
    was $25.07 Special Price $24.83
  2. Tube Conn Y Shaped Sz 21
    Manufacturer: Kimble Chase
    Tubes Hose Connector Y-Shaped Tube O.D. (mm) 8. Hose Connectors #1. Approx. Overall Width x Height (mm) 52 x 90 Useful in connecting apparatus. (1 per EA)
    Learn More
    was $46.66 Special Price $46.20
  3. Adapter Univ 8-11mm 24/40
    Manufacturer: Kimble Chase
    Adapters Inlet Medium and Full Length [standard taper] Joints BEVEL-SEAL [standard taper] Joint 24/40. Accommodation Range (mm) 8-11. Nominal Size (in.) 3/8. O-Ring Size 111. Mod. GPI Thread 20-415 For use with plain thermometers pipets syringes or other small items with an O.D. (1 per EA)
    Learn More
    $117.72
  4. Adapter Filling St 24/40
    Manufacturer: Kimble Chase
    Adapters Filling Adapter AIRLESS-WARE Hose Connections #2. [standard taper] Joint 24/40. Approx. Overall Height x Width (mm) 250 x 54 Designed to complement the 547600 solvent repurifier and to facilitate product removal from the storage area. (1 per EA)
    Learn More
    $133.90
  5. Adapter Inlet Septum 14/20
    Manufacturer: Kimble Chase
    Adapters Septum Inlet Adapter PTFE Plug AIRLESS-WARE [standard taper] Joint 14/20. Height Above Ground Joint (mm) 80. Approx. Overall Height x Width (mm) 100 x 55 Gas inlet adapter with a [standard taper] joint. (1 per EA)
    Learn More
    $232.89
  6. Manifold Airless 3-Place
    Manufacturer: Kimble Chase
    AIRLESS-WARE Manifold Each stopcock has a metering groove cut into the plug to provide fine control of vacuum sources and inert gases. Distance between the three stopcocks is 65mm. Approximate overall length: 230mm. Number 2 hose connectors. (1 per EA)
    Learn More
    was $884.32 Special Price $866.20
  7. Manifold Airless 3-Place
    Manufacturer: Kimble Chase
    AIRLESS-WARE Manifold 4mm PTFE vacuum valves provide grease-free control. Sample contacts only PTFE and borosilicate glass. Distance between valves is 100mm. Beams have a 12.7mm outer diameter delivery ports have a 9mm OD. Approximate overall length: 300mm. 3 places. (1 per EA)
    Learn More
    was $1,192.31 Special Price $1,168.32
  8. Valve Release Pressure
    Manufacturer: Kimble Chase
    Pressure Release Valve Designed for applications that require an evacuated apparatus be filled with an inert gas to one atmosphere. Uses include introducing an inert gas into a vacuum desiccator or nitrogen into an AIRLESS-WARE apparatus. #2 hose connector. Overall height: 13cm. (1 per EA)
    Learn More
    was $369.37 Special Price $356.71
  9. Dish,Crystallizing,80X40mm
    Manufacturer: Kimble Chase
    KIMAX Crystallizing Dish Flat bottom and straight sides. Diameter: 80mm. Height: 40mm. (24 per CS )
    Learn More
    was $750.71 Special Price $675.70
  10. Arsine Generator Complete
    Manufacturer: Kimble Chase
    Miscellaneous Arsine Generator Capacity (mL) 125. [standard taper] Joints 24/40. Approx. Overall Height x Width (mm) 285 x 65 An improved version of 241100-0000 this unit requires less space and set-up time and is easier to clean. (1 per EA)
    Learn More
    $259.94
  11. Adapter Bent Bantam Ware
    Manufacturer: Kimble Chase
    Adapters Distillation Bent 105 [standard taper] Joints 14/20. Approx. Overall Height x Width (mm) 70 x 55 With a [standard taper] inner drip joint at the bottom and an [standard taper] outer joint at the top. (1 per EA)
    Learn More
    $92.75
  12. Adapter Connecting
    Manufacturer: Kimble Chase
    Adapters Distillation Connecting BEVEL-SEAL [standard taper] Joints 14/20. Modified GPI Thread Size 13-425. Thermometer Immersion (mm) 25. Approx. Overall Height x Width (mm) 75 x 50 With a threaded top connection for plain stem thermometers. (1 per EA)
    Learn More
    $95.16
  13. Adapter Vacuum Bantam-Ware
    Manufacturer: Kimble Chase
    Adapters Inlet with Hose Connection [standard taper] Joints 14/20. Hose Connection #1. Approx. Overall Height (mm) 95 Vertical adapter with vacuum take-off and drip tip. (1 per EA)
    Learn More
    $104.23
  14. Stopper,PE,Size 19
    Manufacturer: Kimble Chase
    Polyethylene Stopper Polyethylene linear high-density stoppers fit Neck Ground to [standard taper] Stopper size 19. Yellow and blue with a closed bottom. Enlarged flange is designed to protect the neck if the glassware item is tipped over. 6 stoppers per case.
    Learn More
    was $45.34 Special Price $43.61
  15. Condenser Reflux Bantam-Ware
    Manufacturer: Kimble Chase
    Reflux Condenser 200mm. Internal coil-type cold finger. Outer joints at top inner drip joint at bottom and two hose connectors at top for water inlet/outlet. Tightly wound coil provides surface area to condense high vapor pressure solvents. Number 1 hose connection. 14/20 standard taper joint. (1 per EA)
    Learn More
    $324.61
  16. Crystlizatn App Craig 7ml
    Manufacturer: Kimble Chase
    Tubes Craig Recrystallization Tube Capacity (mL) 7. Approx. Height (mm) 100. Tube O.D. (mm) 14 Combination crystallizing and filtration centrifuge tube. Filtered solutions are allowed to cool in the Craig tube inducing crystallization. (1 per EA)
    Learn More
    was $60.42 Special Price $59.18
  17. Distn Column Vigreux
    Manufacturer: Kimble Chase
    Distillation Column Vigreux Vigreux distilling column with indentations over the entire length for improved vapor-liquid contact. [Standard Taper] 14/20 joints. Column height: 130mm. (1 per EA)
    Learn More
    $161.80
  18. Distn Head Short Path Vigr
    Manufacturer: Kimble Chase
    Distillation and Reactors Head Short Path Vigreux [standard taper] Joints 14/20. Thermometer [standard taper] Joint 10/18. Hose Connections #1. Approx. Overall Height x Width (mm) 105 x 95 Design uses Vigreux indentations for increased surface area within the vapor path. (1 per EA)
    Learn More
    was $419.21 Special Price $414.63
  19. Flk Rb 1N 100ml 14/20 Bw
    Manufacturer: Kimble Chase
    KONTES Boiling Flask Round Bottom 100mL single neck flask with outer [Standard Taper] 14/20 joint. (1 per EA)
    Learn More
    was $43.72 Special Price $42.60
  20. Stpk,PTFE,No Plug,4mm
    Manufacturer: Kimble Chase
    Stopcocks Straight Bore PTFE Plug Stopcock Straight Bore without PTFE Plug Replacement plug is 41500F listed below. (1 per EA)
    Learn More
    was $57.35 Special Price $54.40
  21. Column Cd Reduc #5 Bevseal
    Manufacturer: Kimble Chase
    Chromatography Column Cadmium Reduction with BEVEL-SEALTM Connections CHROMAFLEX Approx. Overall Height (mm) 350 This column features all borosilicate glass construction with an 85 mL reservoir. (1 per EA)
    Learn More
    was $340.75 Special Price $330.45
  22. Chromatographic Sampl Tube
    Manufacturer: Kimble Chase
    Tubes Chromatography Sample Tube with Screw Cap Capacity (mL) 2. GPI Thread Size 13-425. Approx. Body O.D. (mm) 14. Graduations x Subdiv. (mL) 0-0.3 x 0.01. Approx. (1 per EA)
    Learn More
    $120.35
  23. Weighing Base 19/22
    Manufacturer: Kimble Chase
    Chromatography Column Neutral Oil and Loss CHROMAFLEX Weighing Base Apparatus for the determination of total neutral oil of natural fats and oils consisting of triglycerides and unsaponifiable matter. Unique design of the flask allows the transfer of the weighed sample directly onto the column. (1 per EA)
    Learn More
    was $57.00 Special Price $56.91
  24. Condenser St 24/40
    Manufacturer: Kimble Chase
    Condensers Friedrich Full Length [standard taper] Joints [standard taper] Joints 24/40. Jacket Length (mm) 225. Hose Connections #2. Approx. Overall Height (mm) 325 Specially designed to provide a long vapor path good heat transfer and anti-flooding characteristics. (1 per EA)
    Learn More
    $443.25
Filters
Set Descending Direction

186 items

Page
per page
View as List Grid