Reusable Glassware

HPLC Adapter Solvent Pickup ULTRA-WARE Pickup Adapter THF-Resistant 47 mm Designed to be used with the Five Valve Four Valve and Filtration caps to provide safe in-line filtration that replaces the traditional pour-and-wait funnel filtration method. (1 per EA)

HPLC Cap System Five Valve Recirculation / Filtration THF-Resistant ULTRA-WARE Pickup Adapter THF-Resistant 90 mm Tetrahydrofuran (THF) widely used as a mobile phase for GPC attacks the CTFE valve stems and TFE/propylene o-rings used in the standard Five Valve Cap. (1 per EA)

Adapters Vacuum Hose Fits Tubing I.D. (in.) 3/8. Hose Connection #2. Approx. Overall Height (mm) 50 Size 15 o-ring connector for use with 216030 and 216040 HI-VAC manifolds and the 179920 adapter for applications utilizing tubing. Supplied with one size 116 Viton o-ring. (1 per EA)

Polyethylene Stopper Polyethylene linear high-density stoppers fit Neck Ground to [standard taper] Stopper size 13. Yellow and blue with a closed bottom. Enlarged flange is designed to protect the neck if the glassware item is tipped over. 6 stoppers per case.

Polyethylene Stopper Polyethylene linear high-density stoppers fit Neck Ground to [standard taper] Stopper size 9. Yellow and blue with a closed bottom. Enlarged flange is designed to protect the neck if the glassware item is tipped over. 6 stoppers per case.

Distilling Head For use with Short Path Distillation Apparatus (KT284800-0000). (1 per EA)

Distillation and Reactors Receiver Cow-Type Distribution Adapter Cow-type design having three receivers spaced 45 apart. Condensers with drip joints will protrude into the spherical section keeping wetted surfaces and product hold-up to a minimum. (1 per EA)

Stopcock Nylon 3-Way Pk/10 (10 per CS )

Tubes Color Comparison AOCS Length (mm) 154. Approx. I.D. (mm) 19. Approx. O.D. (mm) 22. Rings Distance from Inside Bottom (mm) 25.4 67 133 With the Shadowless Bottom feature.

Tubes Color Comparison Low Form Nessler (Unmatched) Grad. at (mL) 50 100. Approx. O.D. and Height (mm) 32 x 200. Scale Length (mm) 145-158 With the Shadowless Bottom feature. Rings and legend are durable white ceramic enamel. Rings coincide with specific volumes of liquid.

Condensers Friedrich Full Length [standard taper] Joints [standard taper] Joint 45/50. Cold Finger Length (mm) 190. Hose Connections #2. Approx. Overall Height (mm) 340 Water inlet and outlet located above ring-sealed inner condensing tube. (1 per EA)

KIMAX Viscosity Tube For rough control work where bubble comparison is made to limit varnish samples of known viscosity reference ASTM D 1545. 114mm long with 10.75 +-0.125 mm ID. With durable white ceramic enamel lines at 27 100 and 108mm from the outside bottom. (144 per CS )

Distillation and Reactors Receiver Moisture Test Capacity (mL) 20. [standard taper] Joints 24/40. Graduations x Subdiv. (mL) 0-3 x 0.23-20 x 0.5. Approx. Overall Height x Width (mm) 355 x 130 Dean Stark design for solvents that are either heavier or lighter than water. (1 per EA)

Distillation and Reactors Apparatus Ammonia Nitrogen Flask Cap. (mL) 1000. [standard taper] Joints 24/40. Hose Connections #2. Approx. Overall Height x Width (mm) 595 x 310 For determining the proteinaceous nitrogen content in water. (1 per EA)

Extraction Apparatus Continuous Liquid/Liquid Heavier Than Water Extractor Body [standard taper] 45/50 Top [standard taper] 24/40 Side 100 mm O.D. Extractor body designed for EPA priority pollutant samples where the extracting solvent is heavier than water. (1 per EA)

Extraction Body Soxhlet Body I.D. x Length (mm) 31 x 135. Top [standard taper] Joint 34/45. BottomTS Joint 24/40. Approx. Overall Height (mm) 270 Extractor body only used as component part of 585000 585050 and 585250 Soxhlet extraction assemblies. (1 per EA)

3mL B Blue Blood Typing Color-Coded Tubes (1000 per CS )

Prelabeled Culture Tube Disposable. Borosilicate glass. For use in cell washers and water baths as writing on label is permanent. Fused-on yellow label provides ideal surface for marking. Label size is 19x34.9mm. Tube size is 12x75mm. Volume: 5mL. (1000 per CS )

Gas Sampling Tube with PTFE Valves Capacity (mL) 125. GPI Thread Size 13-425. Approx. Overall Height x Width (mm) 90 x 345 Designed for the collection and storage of environmental samples. High vacuum valves are provided for evacuation and filling. (1 per EA)

Labsets kits Organic Chemistry Microscale Threaded / [standard taper] 14/10 Basic Basic [standard taper] 14/10 Microscale Kit The 746000 Series MICROFLEX Kits feature [standard taper] 14/10 standard taper connections. (1 per EA)

Labsets kits Organic Chemistry Microscale Threaded Research MICROFLEX Standard Threaded Microscale Kit The 747000 Series MICROFLEX Kits feature versatile threaded chaste connections. They can be assembled rightside up or upside down providing great versatility. (1 per EA)

Adapters Rotary Evaporator Vial Adapter Systems PTFE GPI Thread Size 20-400. [standard taper] Joint 19/22. Approx. Overall Height (mm) 55 Design provides for expanded volume for organic mixtures that have a tendency to foam excessively. (1 per EA)

Microscale Vacuum Manifold 6-Place Microscale Threaded (GPI 13-425) GPI Thread Size 13-425. Approx. Overall Width x Height (mm) 200 x 40 Designed for the concentration of multiple samples using an inert atmosphere or vacuum. Also useful for molecular distillation. (1 per EA)

Stopcocks Straight Bore PTFE Plug PS Stopcock Size Bore (mm) 2. Plug Size (mm) 11/25. Approx. Stem O.D. (mm) 8 With a 1:5 taper PTFE plug and a threaded pressure nut. The more exaggerated taper permits easier use at higher than ambient temperatures. (1 per EA)