This category covers reusable glass apparatus for teaching, research and quality control labs. It includes test tubes in light-wall, rimless, side-arm and screw-cap styles (bakelite caps with rubber liners), graduated glass centrifuge tubes with stoppers or screw caps, crystallizing dishes, glass Petri dishes, evaporating basins, calibrated pycnometers, 300 mL B.O.D. bottles, and ground-joint pieces such as Claisen, vacuum, reducing and expansion adapters and stoppers. Larger setups include Soxhlet extraction apparatus, Kjeldahl distillation sets, water-jacketed flasks, distillation apparatus and organic chemistry glassware kits, plus porcelain and plastic spot plates.

Check the glass type first: borosilicate handles heating and temperature changes far better than soda glass. Match ground-joint sizes exactly, such as 24/40 or 29/42, so adapters, stoppers and flasks fit. Compare capacity, dimensions, wall thickness, graduation or calibration, closure type and pack quantity, and confirm the speed rating before using glass tubes in a centrifuge.

Reusable Glassware: common questions

What is a crystallizing dish used for?

A crystallizing dish is a shallow, flat-bottomed glass dish with straight sides. It is used to evaporate solutions so crystals can form, and also as a water or ice bath, a cover dish, or a container for holding small items. Borosilicate dishes can be heated gently, and versions with a spout make pouring easier.

When should I use glass centrifuge tubes instead of plastic?

Glass centrifuge tubes are chosen for organic solvents that attack plastics, for work where plastic leachables could interfere, and when tubes will be cleaned and reused. They can break under high forces, so use them only within the speed or g-force rating given by the maker, with properly fitting adapters or cushions in the rotor.

What does 24/40 mean on lab glassware?

24/40 is a standard taper ground-glass joint size. The first number is the approximate diameter in millimeters at the wide end of the joint, and the second is the length of the ground section in millimeters. Male (cone) and female (socket) joints with the same numbers fit together, and reducing or expansion adapters connect different sizes.

What is the difference between borosilicate and soda-lime glass?

Borosilicate glass has low thermal expansion, so it tolerates heating and rapid temperature changes much better than soda-lime glass and is more resistant to chemical attack. Soda-lime glass costs less and is used for items that are not heated, such as some jars and display pieces. For heating, autoclaving or flame work, choose borosilicate.

Reusable Glassware

Filters
Set Descending Direction

454 items

Page
per page
View as List Grid
  1. Media Storage Bottle,250mL With 33m Blk Cap
    Manufacturer: Bellco Glass Inc
    Manufactured from Type1 Class B Borosilicate Glass. Large opening and sloping shoulders facilitate pouring and cleaning. Heavier walls prevent breakage of glass. Media storage bottles have white graduations and a marking area. They are supplied with rubber lined black phenolic screw cap. Specifications: Type 1 Class B Borosilicate Glass Sizes: 250ml (33)mm Cap OD x OAH: 66 x 149 Case Quantity: 12 (12 per CS )
    Learn More
    $122.38
  2. Bellco Glass, Inc -Standard Overhead drive Adapter,100mm
    Manufacturer: Bellco Glass Inc
    The Bellco 100 mm Overhead Drive Cap Assembly is manufactured from 316L SST with dual bearings and seals. A dust shield for paddle assemblies (1/4” shaft) is included. Cap assembly features two 1/4” NPT female ports for addition of optional fittings. (1 per EA )
    Learn More
    $1,330.23
  3. Stainless Steel Pitched Blade Impeller 3L For 3L Bioreactor Systems
    Manufacturer: Bellco Glass Inc
    SST Pitched Blade Impeller Material: 316l SST with electropolish finish English thread OD: 1 3/4" For 5/16" od shafts Usually requires 2 each (1 per EA )
    Learn More
    $333.30
  4. Overhead Drive Drive Vessel 36L Six Vertical Sidearms
    Manufacturer: Bellco Glass Inc
    Manufactured from type 1 class a Borosilicate glass. Includes 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Suitable for all cell culture fermentation. Compatible with bellco over head drive and magnetic stirrers. Specifications: Material: Type 1 Class A Borosilicate Glass 100mm Center Neck Baffles: 0 Sidearms: 6 OD x OAH: 410 x 535mm (1 per EA )
    Learn More
    $2,646.46
  5. Stainless Steel 2-Port Assembly, 1L For Media Bottles
    Manufacturer: Bellco Glass Inc
    These stainless steel port assemblies are designed for use with media storage bottles for adding and withdrawing media or liquids. The 2- port models feature a siphon vent tube and is supplied with a 45mm polypropylene blue open top screw cap and white silocone liner. DESIGNED FOR 5637 AND 5639 MEDIA STORAGRE BOTTLES. -WELDED, 316L STAINLESS STEEL CONSTRUCTION, 1/4" INCH OD TUBING. -ELECTROPOLISHED FINISH, CONTINUOUS SEAL WELD. -TWO PORT MODEL FEATURES SIPHON AND VENT TUBES. -LONG TUBE: 8 1/2" (1 per EA )
    Learn More
    $235.39
  6. Water Jacketed Flask Only,50mL
    Manufacturer: Bellco Glass Inc
    Flask Only. For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8" ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. Specifications: Jacket Volume (mL): 40ml Cap Size: 51mm Sidearm Cap Size (mm): 18 OD x OAH: 70x120mm (1 per EA )
    Learn More
    $440.64
  7. Glass Ball Spinner Complete,1000mL
    Manufacturer: Bellco Glass Inc
    Description: Glass Ball Spinner Comp, 1000mL Size: 1000mL Material: Type 1 Class A Borosilicate Glass Flask Dimensions: 135mm OD x 240mm OAH, two 45mm sidearms offset at 60º, 100mm center neck Includes two 45mm blue PP screw caps & two 45mm blue PP pouring rings Impeller Assembly: one 100mm blue PP screw cap, 100mm Teflon cap seal, 100mm blue silicone sealing gasket, soft silicone flex tube, glass ball magnet tube, and magnet Specially Formed Bottom Indent Prevents Accumulation under impeller Glass ball houses a magnet for gentle agitation of Micro carrier Beads (1 per EA )
    Learn More
    $532.36
  8. Stainless Steel Overhead Drive Impeller Assembly 36L Full Width
    Manufacturer: Bellco Glass Inc
    Manufactured from 316l stainless steel for standard bioreactor vessels. Use with over head drive motors. PADDLE L X W (IN): 3 X 14. (1 per EA )
    Learn More
    $855.95
  9. Flat Bottom Canister Complete 38X250mm
    Manufacturer: Bellco Glass Inc
    Manufactured from type 1 class a Borosilicate glass. Bottom pad prevents chipping and breaking of pipette tips. All components can and will withstand repeated dry or steam heat serialization. Supplied stainless steel closure. Case qty-6 (6 per CS )
    Learn More
    $146.08
  10. Low Profile 2-Port Assembly 3L For Vertical Low Profile Vessels
    Manufacturer: Bellco Glass Inc
    Low profile 45mm 2-port assembly for vertical low profile 3L vessels Seamed welded – electropolish 316l stainless steel material 32ra finish or better All tubes; .250"od x .152"id Siphon tube (LONG TUBE); 8 1/2" LONG. VENT TUBE: 1". SUPPLY WITH S/CAP (A523-599) & WHITE SILICONE LINER (A523-600) (1 per EA )
    Learn More
    $218.97
  11. Head Plate Setup Stand Bioreactor
    Manufacturer: Bellco Glass Inc
    Headplate setup stand is for hands-free assembly of bioreactor head plates manufactured from aluminum and measures 8"x8"x3" assembled. Headplate is inserted into the slot on the stand and secured into place with thumbscrews. It holds any head plate up to 6mm thick. (1 per EA )
    Learn More
    $402.88
  12. Internal Overhead Bearing Impeller Assembly, 15L
    Manufacturer: Bellco Glass Inc
    Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. Sealed internal assembly requires less incubator space. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 100mm Flask size: 15 PADDLE; L X W:9.5 X 6 IN (1 per EA )
    Learn More
    $921.82
  13. Double Window Refrigerated Incubator, 115V
    Manufacturer: Bellco Glass Inc
    The Bellco Refrigerated Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )
    Learn More
    $20,001.25
  14. 2 Position Process Stirr Complete,115V
    Manufacturer: Bellco Glass Inc
    Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )
    Learn More
    $3,326.81
  15. Beaker-Heavy Wall,4L
    Manufacturer: Bellco Glass Inc
    Manufactured from Type 1 Class A Borosilicate Glass with a low coefficient of expansion. Heavy wall beakers meet astime-960 type 1 specifications for classification design capacity and markings. Features a easy pour spout, white permanent graduations and a large marking square. Specifications: Type 1 Class A Borosilicate Glass Size: 4L Dimensions: 160 x 250mm Case Quantity: 3 (2 per CS )
    Learn More
    $349.76
  16. Stainless Steel Tube Rack,38mm-12P 2x6 Spacing
    Manufacturer: Bellco Glass Inc
    Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 1 9/16" (39.6mm) Tube size: 38mm Spacing: 2x6 holds 12 tubes Dimensions: 10" x 3 1/2" x 2 7/8" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .162"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )
    Learn More
    $93.57
  17. Bellco Glass, Inc - Mini Oven w/o Rot,115V
    Manufacturer: Bellco Glass Inc
    The Bellco Auto-blot Micro Hybridization Oven consists of an incubator with an integral rotisserie device. The rotisserie has the capacity for up to 4 large hybridization bottles or 8 small hybridization bottles. Alternatively, any combination of large or small bottles can be used. This Auto-blot Micro Hybridization Oven features an advanced temperature controller for precise control of oven temperature. Without Rotisserie 14”x17”x13” (35x42x32cm) Int: 7”x15”x8” (18x37x20cm) 115v. (1 per EA )
    Learn More
    $4,010.12
  18. Beaker-Heavy Wall,400mL
    Manufacturer: Bellco Glass Inc
    Manufactured from Type 1 Class A Borosilicate Glass with a low coefficient of expansion. Heavy wall beakers meet astime-960 type 1 specifications for classification design capacity and markings. Features a easy pour spout, white permanent graduations and a large marking square. Specifications: Type 1 Class A Borosilicate Glass Size: 400mL Dimensions: 80 x 106mm Case Quantity: 12 (12 per CS )
    Learn More
    $283.29
  19. Bellco Glass, Inc - Micro-Oven,230V w/4 Position Rotisserie
    Manufacturer: Bellco Glass Inc
    The Bellco Auto-blot Micro Hybridization Oven consists of an incubator with an integral rotisserie device. The rotisserie has the capacity for up to 4 large hybridization bottles or 8 small hybridization bottles. Alternatively, any combination of large or small bottles can be used. This Auto-blot Micro Hybridization Oven features an advanced temperature controller for precise control of oven temperature. Ext: 14”x17”x13” (35x42x32cm) 230v (1 per EA )
    Learn More
    $3,752.52
  20. 3-Port Sparger Assembly W/Holes, 15L For VSA Vessels
    Manufacturer: Bellco Glass Inc
    316-l stainless steel ra32 or better finish .040" drilled holes sparger for low profile vertical side arm vessels. Threaded end is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasket. Triple tube configuration With Vent, Fill/Sample And Sparge. (1 per EA )
    Learn More
    $391.86
  21. 2 Position Front End Controlled Process Stir Complete,230V
    Manufacturer: Bellco Glass Inc
    Bell-ennium Process Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. The Front-End models are designed to position so that one flask is positioned behind the other, minimizing the width of the stirrer for limited space work areas. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. Heavy duty magnet assemblies provide the best magnetic coupling while timing belts on all positions insure smooth even stirring of vessel contents. The low profile chassis measure 11 x 20 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. The PID process controller provides RS-485 communication with your existing lab network (software not included), as well as two alarm outputs for the optional Motion Alarm. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )
    Learn More
    $3,349.09
  22. 1 Position Process Stirr Complete,115V-8L
    Manufacturer: Bellco Glass Inc
    Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )
    Learn More
    $2,830.64
  23. 2 Port Stainless Steel Assembly 36L For Vertical Overhead Drive Vessels
    Manufacturer: Bellco Glass Inc
    2-port 45mm cap assembly, 36l For 15l 1964 style Over Head Drive vessels Long tube: 1/4"od x 18 1/4" Short tube: 1/4"od x 2.156" All tubes extended up 1.0" above the cap slug Supply 45mm s/cap & white silicone liner (1 per EA )
    Learn More
    $363.98
  24. Bellco Glass, Inc - 36L Bello Control Systems Flat Bottom System,115V
    Manufacturer: Bellco Glass Inc
    Bellco Control System, Flat Bottom. The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and 1965 Spinner Flasks. Sizes range from: --100 mL to 36 liters for 1965 spinners --100 to 3000 mL for 1967 spinner flasks Material: --316L Stainless Steel 1965 & 1967 Series Micro-Carrier Spinner Flask 36L 36L BCS Flat Bottom System 115v (1 per EA )
    Learn More
    $39,904.53
Filters
Set Descending Direction

454 items

Page
per page
View as List Grid