This category covers reusable glass apparatus for teaching, research and quality control labs. It includes test tubes in light-wall, rimless, side-arm and screw-cap styles (bakelite caps with rubber liners), graduated glass centrifuge tubes with stoppers or screw caps, crystallizing dishes, glass Petri dishes, evaporating basins, calibrated pycnometers, 300 mL B.O.D. bottles, and ground-joint pieces such as Claisen, vacuum, reducing and expansion adapters and stoppers. Larger setups include Soxhlet extraction apparatus, Kjeldahl distillation sets, water-jacketed flasks, distillation apparatus and organic chemistry glassware kits, plus porcelain and plastic spot plates.

Check the glass type first: borosilicate handles heating and temperature changes far better than soda glass. Match ground-joint sizes exactly, such as 24/40 or 29/42, so adapters, stoppers and flasks fit. Compare capacity, dimensions, wall thickness, graduation or calibration, closure type and pack quantity, and confirm the speed rating before using glass tubes in a centrifuge.

Reusable Glassware: common questions

What is a crystallizing dish used for?

A crystallizing dish is a shallow, flat-bottomed glass dish with straight sides. It is used to evaporate solutions so crystals can form, and also as a water or ice bath, a cover dish, or a container for holding small items. Borosilicate dishes can be heated gently, and versions with a spout make pouring easier.

When should I use glass centrifuge tubes instead of plastic?

Glass centrifuge tubes are chosen for organic solvents that attack plastics, for work where plastic leachables could interfere, and when tubes will be cleaned and reused. They can break under high forces, so use them only within the speed or g-force rating given by the maker, with properly fitting adapters or cushions in the rotor.

What does 24/40 mean on lab glassware?

24/40 is a standard taper ground-glass joint size. The first number is the approximate diameter in millimeters at the wide end of the joint, and the second is the length of the ground section in millimeters. Male (cone) and female (socket) joints with the same numbers fit together, and reducing or expansion adapters connect different sizes.

What is the difference between borosilicate and soda-lime glass?

Borosilicate glass has low thermal expansion, so it tolerates heating and rapid temperature changes much better than soda-lime glass and is more resistant to chemical attack. Soda-lime glass costs less and is used for items that are not heated, such as some jars and display pieces. For heating, autoclaving or flame work, choose borosilicate.

Reusable Glassware

Filters
Set Descending Direction

969 items

Page
per page
View as List Grid
  1. Socket - Single, size 19/26
    Manufacturer: Eisco Scientific LLC
    Socket - Single, size 19/26 (1 per EA )
    Learn More
    was $8.22 Special Price $6.69
  2. 200ml Vigrex Column - Screw Thread 24/29 Socket / Cone Size
    Manufacturer: Eisco Scientific LLC
    200ml Vigrex Column - Screw Thread 24/29 Socket / Cone Size (1 per EA )
    Learn More
    was $71.64 Special Price $58.26
  3. Dish Crystallizing, outer dia 70mm, borosilicate glass, flat bottom with spout Pack of 6
    Manufacturer: Eisco Scientific LLC
    Dish Crystallizing, outer dia 70mm, borosilicate glass, flat bottom with spout Pack of 6 (6 per PK )
    Learn More
    was $64.60 Special Price $52.54
  4. Overhead Drive PTFE Impeller Assembly 15L
    Manufacturer: Bellco Glass Inc
    Ideal use for over head drive vessels. 15L OHD Impeller Assembly Consists of Paddle, Plug, Paddle Holder, and Drive Shaft Paddle [A523-214]: PTFE material, 171.5mm wide x 76.2mm tall x 1.6mm thick Plug [A542-49]: PTFE, 9.5mm OD x 19.1mm long (approx.) Paddle Holder [A542-50]: White PTFE, 279.4mm long x 19.1mm OD Drive Shaft [A542-47]: 316L SST, 215.9mm long x 6.4mm OD (approx.) (1 per EA )
    Learn More
    $261.99
  5. Dual Pan Hot Shaker,230V
    Manufacturer: Bellco Glass Inc
    The Bellco Sci-ERA Dual Pan Hot Shaker is a slow speed, large orbit shaker with two independently controlled baths for incubation of electrophoretic gels and filter hybridization media. Stringent temperature control with a sensitivity of +/-0.1oC is useful for many biochemical assays. This Bellco design incorporates a seamless stainless steel lined temperature controlled water bath mounted on a low-profile one inch orbiting platform. The unique chamber design offers simple containment of potential spills. The chamber is completely isolated from electromechanical components. The Sci-ERA Dual Pan Hot Shaker has audible over-temperature alarms and built-in safety features to prevent heater burn-out. An easy-to-use microprocessor controller offers stringent temperature control. (1 per EA )
    Learn More
    $7,396.52
  6. Pipet Plugger,115V
    Manufacturer: Bellco Glass Inc
    The Bellco Pipette Plugger is designed for plugging a full range of standardized cotton plugging pipettes. This unit has three speeds and can be adjusted quickly and easily to plug 40, 50 or 60 pipettes per minute. The unit will produce uniform shape cotton plugs, minimizing the problem of tight and loose plugs. Machine is portable with a convenient carrying handle. Time tested design with a precision Geneva mechanism. --Speed Range: 3 Settings, Approximately 40/50/60 Pipettes/Minute --Weight: 19 Lbs. (9.0 Kg) --Operates In: Continuous Or Actuate Mode --Supplied With 1 Bag Of Cotton Roving 7750-22222 (1 per EA )
    Learn More
    $5,791.56
  7. Adapter Multiple - Two necks parallel, Socket size 19/26, Cone size 24/29
    Manufacturer: Eisco Scientific LLC
    Adapter Multiple - Two necks parallel, Socket size 19/26, Cone size 24/29 (1 per EA )
    Learn More
    was $25.71 Special Price $20.92
  8. United Scientific® Reducing Adapter, Socket 14/20, Cone 19/22
    Manufacturer: United Scientific Supplies
    United Scientific® Reducing Adapter, Socket 14/20, Cone 19/22 (1 per EA )
    Learn More
    was $14.15 Special Price $9.89
  9. Water Jacketed Low Profile Overhead Drive Vessel W/4 SA 3L
    Manufacturer: Bellco Glass Inc
    Ideal for use with water baths for precise temperature control. Water jacketed low profile OHD vessel with: size: 3l four (4) vertical 45mm sidearms dimensions: 300mm od x 280mm overall height two (2) #4 hose connections material: type 1 class a borosilicate glass supply: 100mm pp blue cap & white silicone liner & four 45mm pp blue caps & pouring rings (1 per EA )
    Learn More
    $2,651.89
  10. 60ml Spare Extractor for Soxhlet Apparatus Socket Size 34/35 Cone Size 24/29
    Manufacturer: Eisco Scientific LLC
    60ml Spare Extractor for Soxhlet Apparatus Socket Size 34/35 Cone Size 24/29 (1 per EA )
    Learn More
    was $44.53 Special Price $36.21
  11. Stainless Steel 3-Port Assembly, 6L For Angled Sidearms
    Manufacturer: Bellco Glass Inc
    Size: 6l Seam welded w/ electropolish finish 3-port w/ siphon, fill & vent tubes Includes: 45mm pp cap & silicone gasket Dimensions: 1/4" OD x .152" ID Longest tube: 10 1/2" at curve (1 per EA )
    Learn More
    $322.61
  12. Stainless Steel 2-Port Assembly, 2L For Media Bottles
    Manufacturer: Bellco Glass Inc
    These stainless steel port assemblies are designed for use with media storage bottles for adding and withdrawing media or liquids. The 2- port models feature a siphon vent tube and is supplied with a 45mm polypropylene blue open top screw cap and white silocone liner. DESIGNED FOR 5637 AND 5639 MEDIA STORAGRE BOTTLES. -WELDED, 316L STAINLESS STEEL CONSTRUCTION, 1/4" INCH OD TUBING. -ELECTROPOLISHED FINISH, CONTINUOUS SEAL WELD. -TWO PORT MODEL FEATURES SIPHON AND VENT TUBES. -LONG TUBE: 10" (1 per EA )
    Learn More
    $247.16
  13. DISH CRYSTALLIZING WITH SPOUT 230MM
    Manufacturer: Eisco Scientific LLC
    DISH CRYSTALLIZING WITH SPOUT 230MM (1 per EA )
    Learn More
    was $80.44 Special Price $65.43
  14. Coldfinger Assembly 7L
    Manufacturer: Bellco Glass Inc
    Used to generate a localized cold surface on the exterior of the finger. Commonly used for sublimation, and can also be used in re-flux or distillation operations. 7L. (1 per EA )
    Learn More
    $1,231.85
  15. Dish Crystallizing, outer dia 70mm, borosilicate glass, flat bottom with spout
    Manufacturer: Eisco Scientific LLC
    Dish Crystallizing, outer dia 70mm, borosilicate glass, flat bottom with spout (1 per EA )
    Learn More
    was $17.36 Special Price $14.12
  16. 2-Port Stainless Steel Assembly 8L For Vertical Overhead Drive Vessels
    Manufacturer: Bellco Glass Inc
    2-port 45mm cap assembly, 8l For 8l 1964 style Over Head Drive vessels Long tube: 1/4"od x 16 1/4" Short tube: 1/4"od x 2.5/32" All tubes extended up 1.0" above the cap slug Supply 45mm s/cap & white silicone liner (1 per EA )
    Learn More
    $304.92
  17. Test Tube with side arm, 150x24mm, boro. glass
    Manufacturer: Eisco Scientific LLC
    Test Tube with side arm, 150x24mm, boro. glass (1 per EA )
    Learn More
    was $4.33 Special Price $3.52
  18. Petri Dish, outer dia 80 x 17mm height, borosilicate glass
    Manufacturer: Eisco Scientific LLC
    Petri Dish, outer dia 80 x 17mm height, borosilicate glass (1 per EA )
    Learn More
    was $8.64 Special Price $7.02
  19. United Scientific™ Glass Plates, 6in X 6in
    Manufacturer: United Scientific Supplies
    Plates made of clear soda lime glass, 2mm thick, with ground polished edges. Useful for a variety of general laboratory applications including as a cover, mixing surface, etc. (12 per PK )
    Learn More
    was $20.40 Special Price $14.88
  20. Adapter Reduction, Socket size 24/29, Cone size 40/38
    Manufacturer: Eisco Scientific LLC
    Adapter Reduction, Socket size 24/29, Cone size 40/38 (1 per EA )
    Learn More
    was $23.98 Special Price $19.51
  21. Mohr Measuring Pipets, 10 mL, 0.1 graduation interval
    Manufacturer: Heathrow Scientific
    Mohr Measuring Pipets, 10 mL, 0.1 graduation interval (12 per PK )
    Learn More
    was $58.81 Special Price $47.07
  22. Thermowell Assembly 8L For Vertical Overhead Drive Vessels
    Manufacturer: Bellco Glass Inc
    Thermowell assembly is manufactured from 316l stainless steel with 32ra finish or better. It can be used with rtd temperature sensor. Includes polypropylene screw cap and silicone gasket. There are also tubes for addition media and vent. Thermowell assemblies attach to the sidearms with a screw cap assembly. Specifications: Material: 316L Stainless Steel 32Ra Finish or Better Includes: Screw Cap & Silicone Gasket (1 per EA )
    Learn More
    $562.54
  23. Tube,Culture,PTFE Lined,15-415,16X125M
    Manufacturer: Kimble Chase
    KIMAX Culture Tube with PTFE-Faced Rubber-Lined Screw Cap Reusable. Features a large marking spot. Threaded phenolic cap can be loosened for autoclaving. (288 per CS )
    Learn More
    was $1,369.60 Special Price $1,030.65
  24. Flat Bottom Canister Only 38X430mm
    Manufacturer: Bellco Glass Inc
    Flat Bottom Glass Pipette Canister W/Silicone Pad, Manufactured From Borosilicate Glass. All Components Will Withstand Repeated Dry Or Steam Heat Sterilization Bottom Pad Prevents Chipping Of Pipette Tips. Case Qty: 6 (6 per CS )
    Learn More
    $223.09
Filters
Set Descending Direction

969 items

Page
per page
View as List Grid