Reusable Glassware

Stopcocks Straight Bore PTFE Plug PS Stopcock Size Bore (mm) 2. Plug Size (mm) 11/25 With a 1:5 taper PTFE plug and a threaded pressure nut. The more exaggerated taper permits easier use at higher than ambient temperatures. (1 per EA)

The Bellco Refrigerated Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )

2000 ml Flat Bottom Basin Evaporating Borosilicate Glass 200 mm OD (1 per EA )

Adapter Swan Neck, Socket 19/26, Cone 19/26 (1 per EA )

Cone - Single, size 14/23 (1 per EA )

Adapter Expansion, Socket size 24/29, Cone size 14/23 (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

Adapter Receiver Delivery, Short Stem, Socket size 29/32, Length 65mm (1 per EA )

TUBE, CLTRCAP 16X150MM,PK/12 (12 per PK )

Erlenmeyer Narrow neck set of 5-50ml,100ml,250ml,500ml,1000ml (1 per EA )

This unique set includes matched components to provide a convenient Soxhlet extraction workstation. The setup includes a heating mantle with stirrer, 250ml borosilicate glass boiling flask, 100ml borosilicate glass Soxhlet extractor, 300mm borosilicate glass Allihn condenser with glass connectors, sturdy powder-coated metal support stand with aluminum clamp and stability bracket, and two 48" lengths of rubber tubing with screw connectors. The heating mantle with stirrer features a polyurethane coated aluminum exterior and a high quality knitted mantle with glass fiber underlay for uniform distribution of heat. Maximum operating temperature is 400°C. Mantle can be used in a wide range of ambient temperatures, from about 45°F to 100°F, and relative humidity up to 80%. The unit is not waterproof, and is rated as IP code 10 equipment. Stirring function operates at speeds of 50 to 750 RPM. Heating and stirring functions are independently controlled by two separate knobs. Stand measures 20"H x 8"W with a base platform 10.5"D with a 1" lip. Accepts 30 x 100mm or 33 x 100mm extraction thimble (not included). (1 per EA)

Adapter Receiver Delivery, Long Stem, Socket size 10/19, Length 120mm (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass with a low coefficient of expansion. Heavy wall beakers meet astime-960 type 1 specifications for classification design capacity and markings. Features a easy pour spout, white permanent graduations and a large marking square. Specifications: Type 1 Class A Borosilicate Glass Size: 4L Dimensions: 160 x 250mm Case Quantity: 3 (2 per CS )

Adapter Reduction, Socket size 14/23, Cone size 24/29 (1 per EA )

300mm Bulb Condenser - Screw Thread 19/26 Socket / Cone Size (1 per EA )

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 1 9/16" (39.6mm) Tube size: 38mm Spacing: 2x6 holds 12 tubes Dimensions: 10" x 3 1/2" x 2 7/8" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .162"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

United Scientific® Glassware Set of 9 (1 per EA )

The Bellco Auto-blot Micro Hybridization Oven consists of an incubator with an integral rotisserie device. The rotisserie has the capacity for up to 4 large hybridization bottles or 8 small hybridization bottles. Alternatively, any combination of large or small bottles can be used. This Auto-blot Micro Hybridization Oven features an advanced temperature controller for precise control of oven temperature. Without Rotisserie 14”x17”x13” (35x42x32cm) Int: 7”x15”x8” (18x37x20cm) 115v. (1 per EA )

Adapter Multiple - Two necks parallel, Socket size 24/29, Cone size 24/29 (1 per EA )

TUBE, TEST, 24 X 150MM,PK/24 (24 per PK)

Manufactured from Type 1 Class A Borosilicate Glass with a low coefficient of expansion. Heavy wall beakers meet astime-960 type 1 specifications for classification design capacity and markings. Features a easy pour spout, white permanent graduations and a large marking square. Specifications: Type 1 Class A Borosilicate Glass Size: 400mL Dimensions: 80 x 106mm Case Quantity: 12 (12 per CS )

The Bellco Auto-blot Micro Hybridization Oven consists of an incubator with an integral rotisserie device. The rotisserie has the capacity for up to 4 large hybridization bottles or 8 small hybridization bottles. Alternatively, any combination of large or small bottles can be used. This Auto-blot Micro Hybridization Oven features an advanced temperature controller for precise control of oven temperature. Ext: 14”x17”x13” (35x42x32cm) 230v (1 per EA )

Adapter Multiple - Two necks parallel, Socket size 14/23, Cone size 14/23 (1 per EA )

316-l stainless steel ra32 or better finish .040" drilled holes sparger for low profile vertical side arm vessels. Threaded end is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasket. Triple tube configuration With Vent, Fill/Sample And Sparge. (1 per EA )