This category covers reusable glass apparatus for teaching, research and quality control labs. It includes test tubes in light-wall, rimless, side-arm and screw-cap styles (bakelite caps with rubber liners), graduated glass centrifuge tubes with stoppers or screw caps, crystallizing dishes, glass Petri dishes, evaporating basins, calibrated pycnometers, 300 mL B.O.D. bottles, and ground-joint pieces such as Claisen, vacuum, reducing and expansion adapters and stoppers. Larger setups include Soxhlet extraction apparatus, Kjeldahl distillation sets, water-jacketed flasks, distillation apparatus and organic chemistry glassware kits, plus porcelain and plastic spot plates.

Check the glass type first: borosilicate handles heating and temperature changes far better than soda glass. Match ground-joint sizes exactly, such as 24/40 or 29/42, so adapters, stoppers and flasks fit. Compare capacity, dimensions, wall thickness, graduation or calibration, closure type and pack quantity, and confirm the speed rating before using glass tubes in a centrifuge.

Reusable Glassware: common questions

What is a crystallizing dish used for?

A crystallizing dish is a shallow, flat-bottomed glass dish with straight sides. It is used to evaporate solutions so crystals can form, and also as a water or ice bath, a cover dish, or a container for holding small items. Borosilicate dishes can be heated gently, and versions with a spout make pouring easier.

When should I use glass centrifuge tubes instead of plastic?

Glass centrifuge tubes are chosen for organic solvents that attack plastics, for work where plastic leachables could interfere, and when tubes will be cleaned and reused. They can break under high forces, so use them only within the speed or g-force rating given by the maker, with properly fitting adapters or cushions in the rotor.

What does 24/40 mean on lab glassware?

24/40 is a standard taper ground-glass joint size. The first number is the approximate diameter in millimeters at the wide end of the joint, and the second is the length of the ground section in millimeters. Male (cone) and female (socket) joints with the same numbers fit together, and reducing or expansion adapters connect different sizes.

What is the difference between borosilicate and soda-lime glass?

Borosilicate glass has low thermal expansion, so it tolerates heating and rapid temperature changes much better than soda-lime glass and is more resistant to chemical attack. Soda-lime glass costs less and is used for items that are not heated, such as some jars and display pieces. For heating, autoclaving or flame work, choose borosilicate.

Reusable Glassware

Filters
Set Descending Direction

969 items

Page
per page
View as List Grid
  1. Trypsinizing Flask,250mL
    Manufacturer: Bellco Glass Inc
    Manufactured from Type 1 Borosilicate Glass. Designed with deep side baffles for optimal agitation. Promotes enzyme digestion of tissue fragments and homogenates into cell suspense. Includes rubber lined black phenolic screw caps. Integral dam contains non-trypsinized tissue during decanting. Specifications: Type 1 Class A Borosilicate Glass Size: 250ml Sidearm Cap: 16mm Acid Etched & Filled Graduations TOP SCREW CAP SIZE IS 38MM SIDEARM SCREW CAP SIZE IS 16MM OD X OAH (mm): 80 X 163 Case Qty:3 (3 per CS )
    Learn More
    $343.25
  2. Splash Head Vertical Pear Shape, Cone size to fit flask 24/29, to fit condenser 24/29
    Manufacturer: Eisco Scientific LLC
    Splash Head Vertical Pear Shape, Cone size to fit flask 24/29, to fit condenser 24/29 (1 per EA )
    Learn More
    was $44.85 Special Price $36.49
  3. Roller Apparatus Base Only, 230V Modular - 5 Pos
    Manufacturer: Bellco Glass Inc
    The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units feature a solid state control with heavy-duty DC motor and analog tachometer. Non-modular production models feature rubber bumpers, handles and a slotted rear guard. (1 per EA )
    Learn More
    $3,104.29
  4. Test Tube with side arm, 150x24mm, boro. glass, Pack of 10
    Manufacturer: Eisco Scientific LLC
    Test Tube with side arm, 150x24mm, boro. glass, Pack of 10 (10 per PK )
    Learn More
    was $40.62 Special Price $33.03
  5. Adjustable Hanging Bar Spin Flask Complete, 25mL
    Manufacturer: Bellco Glass Inc
    Description: Adjustable Hanging Bar Spinner Flask Complete, 25ml Bellco Adjustable Hanging Bar Spinner Flasks were designed for the efficient growth of suspension cells at low speeds. This flask is manufactured of medium-walled borosilicate glass tubing with black phenolic screw caps. The hanging spinner is adjustable and useful over a wide range of stirring speeds. The 1967-style spinner includes a center screw cap with a stopper for mounting the glass impeller shaft. Adjustable Hanging Bar Spinner Flask consists of: Flask, Impeller Assembly, Impeller Glass Shaft, and Cap Assembly. Flask Specifications [1967-10025]: Material: Type 1 Class A Borosilicate Glass Dimensions: 38.1mm OD x 120mm Overall Height, Two 18mm Sidearms angled 40° offset center One 38mm Screw Thread Center Neck Flask has flat bottom – no dimple Graduations: 5mL to 25mL, every 5mL – White Ink (Approx Volumes) Supply with: Two Rubber Lined Black Phenolic Caps Impeller Assembly Specifications [1969-30025]: Impeller Assembly consists of impeller magnet & magnet holder Impeller magnet: PTFE coated magnet, 25.4mm long x 7.62mm OD (approx.) Magnet Holder: White PTFE, 34.9mm long x 15.9mm OD Glass Shaft Specifications [1969-70100]: Material: Type 1 Class A Borosilicate Glass Dimensions: 7mm OD x 120mm long Cap Assembly Specifications [1967-90038]: Cap Assembly consists of screw cap and stopper Screw Cap: 41mm OD x 37.8mmH with 20.6mm center hole #4 Stopper: Silicone with 6.4mm center hole (1 per EA )
    Learn More
    $210.49
  6. Adapter Receiver Delivery, Long Stem, Socket size 24/29, Length 200mm
    Manufacturer: Eisco Scientific LLC
    Adapter Receiver Delivery, Long Stem, Socket size 24/29, Length 200mm (1 per EA )
    Learn More
    was $15.09 Special Price $12.27
  7. 150ml Crystallizing Dishes Without Spout, Boro. Glass, Flat Bottom
    Manufacturer: Eisco Scientific LLC
    150ml Crystallizing Dishes Without Spout, Boro. Glass, Flat Bottom (1 per EA )
    Learn More
    was $10.91 Special Price $8.87
  8. Eudiometer
    Manufacturer: Eisco Scientific LLC
    Eudiometer (1 per EA )
    Learn More
    was $41.67 Special Price $33.89
  9. Petri Dish, outer dia 10cm, Soda glass
    Manufacturer: Eisco Scientific LLC
    Petri Dish, outer dia 10cm, Soda glass (1 per EA )
    Learn More
    was $5.04 Special Price $4.10
  10. Overhead Drive PTFE Impeller Assembly 3L
    Manufacturer: Bellco Glass Inc
    Ideal use for over head drive vessels. Description: 3L OHD Impeller Assembly Consists of Paddle, Plug, Paddle Holder, and Drive Shaft. Overall length is adjustable from 8.75”-10.75” with ½” increments. Paddle [A523-206]: PTFE material, 108.0 mm wide x 44.5mm tall x 0.8mm thick Plug [A542-49]: PTFE, 9.5mm OD x 19.1mm long (approx.) Paddle Holder [A542-87]: White PTFE, 184.2mm long x 19.1mm OD Drive Shaft [A542-317]: 316L SST, 158.8mm long x 6.4mm OD (approx.) (1 per EA )
    Learn More
    $215.93
  11. Condenser - Liebig, Length of jacket 40cm, total length 59cm., boro. glass
    Manufacturer: Eisco Scientific LLC
    Condenser - Liebig, Length of jacket 40cm, total length 59cm., boro. glass (1 per EA )
    Learn More
    was $23.62 Special Price $19.22
  12. 45 ml Flat Bottom Basin Evaporating Borosilicate Glass 60 mm OD
    Manufacturer: Eisco Scientific LLC
    45 ml Flat Bottom Basin Evaporating Borosilicate Glass 60 mm OD (1 per EA )
    Learn More
    was $10.67 Special Price $8.68
  13. Screw Cap Assembly,51mm
    Manufacturer: Bellco Glass Inc
    Black Phenolic Screw Cap Assembly For Adjustable Hanging Bar Spinner Flask Black phenolic screw caps are manufactured from specially formulated phenolic resin to resist the effects of temperature and steam autoclaving. They have a non-toxic white rubber liner for all general culture applications. Consists of screw cap liner and stopper or compression fitting. 51mm. (1 per EA )
    Learn More
    $40.63
  14. Low Profile Stainless Steel Impeller 3L
    Manufacturer: Bellco Glass Inc
    Stainless steel 3L low profile impeller assembly For low profile Over Head Drive vessel Material: SST 316L Electropolish finish, ra 32 or better Fully assembled Paddle dimensions: 2" T X 5 1/4" W (1 per EA )
    Learn More
    $588.62
  15. 5 Position Process Stirr Complete,115v
    Manufacturer: Bellco Glass Inc
    Bell-ennium Process Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. The Front-End models are designed to position so that one flask is positioned behind the other, minimizing the width of the stirrer for limited space work areas. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. Heavy duty magnet assemblies provide the best magnetic coupling while timing belts on all positions insure smooth even stirring of vessel contents. The low profile chassis measure 11 x 20 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. The PID process controller provides RS-485 communication with your existing lab network (software not included), as well as two alarm outputs for the optional Motion Alarm. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )
    Learn More
    $3,647.66
  16. 300mm Bulb Condenser - Screw Thread 24/29 Socket / Cone Size
    Manufacturer: Eisco Scientific LLC
    300mm Bulb Condenser - Screw Thread 24/29 Socket / Cone Size (1 per EA )
    Learn More
    was $60.60 Special Price $49.29
  17. Adapter Inlet 24/40
    Manufacturer: Kimble Chase
    Adapters Inlet Thermometer Straight with Hose Connection [standard taper] JointsBottom Top 24/40 24/40. Hose Connection #2. Approx. Overall Height (mm) 155 Hose connection on the side. (1 per EA)
    Learn More
    was $110.97 Special Price $109.76
  18. Hollow Hex Borosilicate glass Stopper with Round end Cone Size 14/23
    Manufacturer: Eisco Scientific LLC
    Hollow Hex Borosilicate glass Stopper with Round end Cone Size 14/23 (1 per EA )
    Learn More
    was $2.55 Special Price $2.07
  19. Soxhlet Extraction Apparatus, cap. 600ml, Flask size 2000ml.
    Manufacturer: Eisco Scientific LLC
    Soxhlet Extraction Apparatus, cap. 600ml, Flask size 2000ml. (1 per EA )
    Learn More
    was $280.62 Special Price $228.25
  20. Centrifuge Tube 10ml, Conical, height 110mm, OD 15mm, boro. glass
    Manufacturer: Eisco Scientific LLC
    Centrifuge Tube 10ml, Conical, height 110mm, OD 15mm, boro. glass (1 per EA )
    Learn More
    was $2.33 Special Price $1.89
  21. 2000ml Spare Extractor for Soxhlet Apparatus Socket Size 55/44 Cone Size 34/35
    Manufacturer: Eisco Scientific LLC
    2000ml Spare Extractor for Soxhlet Apparatus Socket Size 55/44 Cone Size 34/35 (1 per EA )
    Learn More
    was $270.71 Special Price $220.19
  22. Centrifuge Tube 15ml, Conical, height 120mm, OD 17mm, boro. Glass Pack of 12
    Manufacturer: Eisco Scientific LLC
    Centrifuge Tube 15ml, Conical, height 120mm, OD 17mm, boro. Glass Pack of 12 (12 per PK )
    Learn More
    was $35.78 Special Price $29.11
  23. Digital Mini Orbital Shaker Complete,115V
    Manufacturer: Bellco Glass Inc
    The Bellco Digital Mini-Orbital Shaker is a high speed shaker for general laboratory cell culture experimentation. This Bellco design incorporates an orbital platform that accepts a variety of optional trays. Peg and grommet design offers a simple method to install or change trays; four versions of trays are available. Brushless DC motor designed for minimal maintenance. (1 per EA )
    Learn More
    $2,812.94
  24. Single Window Roll-In Incubator, 100V
    Manufacturer: Bellco Glass Inc
    Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )
    Learn More
    $10,870.47
Filters
Set Descending Direction

969 items

Page
per page
View as List Grid