Supplies

Manufactured from Type 1 Class A Borosilicate Glass with a low coefficient of expansion. Heavy wall beakers meet astime-960 type 1 specifications for classification design capacity and markings. Features a easy pour spout, white permanent graduations and a large marking square. Specifications: Type 1 Class A Borosilicate Glass Size: 5mL Dimensions: 20 x 23mm Case Quantity: 12 (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Size: 250ml Dimensions: 81x160mm Closure Size: 38 Case Quantity: 12 (12 per CS )

• Material: Type 1 Class A Borosilicate Glass • Dimensions: 65mm Width x 135mm Overall Height • Graduations: 20mL – 100mL, every 20mL • Working Volume: 80-100mL • Specially Formed Bottom Indent Prevents Accumulation Under Impeller • Glass Ball Houses a Magnet for Gentle Agitation of Microcarrier Beads • 5/16” OD x 1/4” ID Flex Tube Shaft • Two 32mm Side arms • One 70mm Screw Thread Center Neck (1 per EA )

Description: Adjustable Hanging Bar Spinner Flask Complete, 50ml Bellco Adjustable Hanging Bar Spinner Flasks were designed for the efficient growth of suspension cells at low speeds. This flask is manufactured of medium-walled borosilicate glass tubing with black phenolic screw caps. The hanging spinner is adjustable and useful over a wide range of stirring speeds. The 1967-style spinner includes a center screw cap with a black compression fitting for mounting the glass impeller shaft. Adjustable Hanging Bar Spinner Flask consists of: Flask, Impeller Assembly, Impeller Glass Shaft, and Cap Assembly. Flask Specifications [1967-10050]: Material: Type 1 Class A Borosilicate Glass Dimensions: 55mm OD x 110mm Overall Height, Two 18mm Sidearms angled 45° offset center One 51mm Screw Thread Center Neck Flask has flat bottom – no dimple Graduations: 10mL to 50mL, every 10mL – White Ink (Approx Volumes) Supply with: Two Rubber Lined Black Phenolic Caps Impeller Assembly Specifications [1969-30050]: Impeller Assembly consists of impeller magnet & magnet holder Impeller magnet: PTFE coated magnet, 34.9mm long x 9.5mm OD (approx.) Magnet Holder: White Teflon, 9.5mm long x 15.9mm OD Glass Shaft Specifications [1969-70100]: Material: Type 1 Class A Borosilicate Glass Dimensions: 7mm OD x 120mm long Cap Assembly Specifications [1967-90051]: Cap Assembly consists of screw cap and stopper Screw Cap: 54.0mm OD x 11.1mm H Stopper: Silicone 32.5mm OD x 26.2mm H (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Ideal for culture aerobic & anaerobic organisms, media storage and mixing. Deep skirted screw caps protect against contamination. Supplied with rubber line black phenolic caps and graduated to approximate volumes. Size: 2L Cap: 38-415 Dimensions: 158x275mm (3 per CS )

316-l stainless steel ra32 or better finish .040" drilled holes sparger for low profile vertical side arm vessels. Threaded end is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasket. Triple tube configuration With Vent, Fill/Sample And Sparge. (1 per EA )

The Media Addition Bottle is designed for holding media and comes with Stainless Steel 2-port assembly for attachment of tubing for connection to a pump to add media to a bioreactor vessel or spinner flask. Specifications: Size: 1L 316L Stainless Steel Port Assembly Ra 32 or Better Finish Type 1A Borosilicate Glass Bottle Case Quantity: 1 (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Ideal for culture aerobic & anaerobic organisms, media storage and mixing. Deep skirted screw caps protect against contamination. Supplied with rubber line black phenolic caps and graduated to approximate volumes. Size: 3L Cap: 38-415 Dimensions: 184x320mm (3 per CS )

7L bioreactor headplate. Manufactured from 316l stainless steel with ra 32 finish or better inside and out. Fittings are sold separately as part of the system. (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Media storage and dispensing flask with bottom hose connection, accepts 1/2" tubing. Graduated to approximate volumes and the heavy duty break resistant neck provides an excellent fit for rubber stoppers. Not for vacuum use. Size: 1L Dimensions: 128x223mm (6 per CS )

Ideal for growing, storing and mixing or aerobic and anaerobic cultures. Threaded neck and sidearm with clean-out port. Supplied with 38mm and 18mm rubber lined black phenolic screw caps. Specifications: Type 1 Class A Borosilicate Glass Sizes: 1L Includes: 38mm And 18mm Black Phenolic Screw Caps Sidearm Dimensions: 19x130mm Case Quantity: 4 (4 per CS )

The Bellco low profile ptfe impellers are designed to be used with bellco low profile cell culture vessels. These low profile impeller consist of a semi-rigid ptfe blade, ptfe paddle holder and stainless steel shaft. Impellers are shipped fully assembled. Paddle Size: 3"Tx 6 3/4"W. Requires Bellco Overhead Drive & Cap Assembly (1 per EA )

Micro-Carrier Impeller Assembly Promote optimal growth of suspension and micro-carrier cultures. Impeller height adjusts through compression fitting in cap. Indented bottom up to 1L prevents accumulation of micro-carrier beads under impeller. Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. Impeller size: 1-3l Paddle dimensions: 1 3/4" x 4 1/4" Consist of: Magnet holder: a523-207 Silicone plug: a523-200 (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes Size: 50ml Closure: 18 Dimensions: 50x105mm (24 per CS )

VERTICAL DISK IMPELLER 3L Material: 316 SST For bioreactor system - 7802-03115 Dimensions: 2" od x 47/64" wide For .375" od shafts (1 per EA )

Manufactured for type 1 class a Borosilicate glass. Ideal for growing, storing, and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes. Size: 1l Closure: 38 Dimensions: 128x235mm Stainless steel closure or Kaput closure sold separately (6 per CS )

Manufactured from type 1 class a Borosilicate glass. Bottom pad prevents chipping and breaking of pipette tips. All components can and will withstand repeated dry or steam heat serialization. Supplied stainless steel closure. Case qty-6 (6 per CS )

Sparger assembly for 6l low profile Over Head Drive vessel. This fits through a 45mm sidearm. Designed for vertical side arm vessels. Sparger tube: 10 1/8" long 316 l SST 20 ra material. 12mm od coarse glass frit (40-60µ) Gently introduces bubbles into vessel. (1 per EA )

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 500ml Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately (1 per EA )

Ideal for use with water baths for precise temperature control. Supplied with 100mm center cap, sidearms cap, and pouring ring. Specifications: #4 Hose Barbs For 1/2" Id Tubing Material: Type 1 Class A Borosilicate Glass Supplied: 45mm Polypropylene Blue Cap & Pouring Ring Size 6L OD x OAH: 300x325mm (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 250ml Sidearm cap: 32mm (included) (1 per EA )

Ideal for growing, storing and mixing or aerobic and anaerobic cultures. Threaded neck and sidearm with clean-out port. Supplied with 38mm and 18mm rubber lined black phenolic screw caps. Specifications: Type 1 Class A Borosilicate Glass Sizes: 500mL Includes: 38mm And 18mm Black Phenolic Screw Caps Sidearm Dimensions: 14x130mm Case Quantity: 4 (4 per CS )

Designed for growing insect cell cultures such as SF9 and SF21 cells. The system comes complete with all accessories needed to grow your insect culture line for expression Includes: –7785-D2005 Digital 5-Position Magnetic Stirrer 115V –1965-03000 Micro-Carrier Spinner Flask Complete 3L –1965-20003R 2-Port Assembly 3L –7808-10004 Gas Blending Stand –7725-00120 Air Supply Pump 115V –7800-10050 Silicone Tubing 1/4” ID (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes Size: 25ml Closure: 18mm Dimensions: 40x96mm (24 per CS )