Glassware

Stirring rods are made of soft flint glass with both ends fire-polished and rounded (144 per PK )

Leighton culture tubes are useful for the study of pathogenic effects on viruses on cells as well as sponge matrix culture and nutritional studies. Use cover slips for preparing expectant tissue cultures with leighton culture tubes. White marking area (36 per CS )

Graduated Pipette, USP BBR, AS, Typ 2.10:0.1mL, pk of 12 (12 per PK)

Solid penny head glass stoppers have an interchangeable ground joint. For use with ground jointed glassware such as flasks and separatory funnels. (1 per EA )

Adapter Reduction, Socket size 14/23, Cone size 19/26 (1 per EA )

Stopper-Flat Head, borosilicate glass, Solid, Cone 19/26 (1 per EA )

Adapter Receiver Delivery, Short Stem, Socket size 24/29, Length 65mm (1 per EA )

Set 46 BU Organic Chemistry Kit (1 per EA )

Heavy gauge rectangular construction for easy stacking and storage. These pipette cans can be sterilized by autoclave or dry heat. (do not exceed 400 degrees F). Includes silicone pad on the inside of top and bottom to protect pipette tips. --Satin finish surface of entire can for convenient marking or coding. --Silicone pads on inside of top and bottom protect pipette tips. --Material: 304 stainless steel .031” thick (1 per EA )

Volumetric Pipets, 5 mL (12 per PK )

Hi-torq SST OHD impeller assembly, full width Size: 15l For hi-torq motor & cap assembly (7774-40115/40230/ & 7764-74000) Similar to 1964-60015 but to accept 1/2" shaft from 7764-74000 cap assembly Material: 316l Paddle size: 3" tall x 9" wide (1 per EA )

Socket - Single, size 19/26 (1 per EA )

200ml Vigrex Column - Screw Thread 24/29 Socket / Cone Size (1 per EA )

Dish Crystallizing, outer dia 70mm, borosilicate glass, flat bottom with spout Pack of 6 (6 per PK )

Volumetric Pipets, 3 mL (12 per PK )

Ideal use for over head drive vessels. 15L OHD Impeller Assembly Consists of Paddle, Plug, Paddle Holder, and Drive Shaft Paddle [A523-214]: PTFE material, 171.5mm wide x 76.2mm tall x 1.6mm thick Plug [A542-49]: PTFE, 9.5mm OD x 19.1mm long (approx.) Paddle Holder [A542-50]: White PTFE, 279.4mm long x 19.1mm OD Drive Shaft [A542-47]: 316L SST, 215.9mm long x 6.4mm OD (approx.) (1 per EA )

The Bellco Sci-ERA Dual Pan Hot Shaker is a slow speed, large orbit shaker with two independently controlled baths for incubation of electrophoretic gels and filter hybridization media. Stringent temperature control with a sensitivity of +/-0.1oC is useful for many biochemical assays. This Bellco design incorporates a seamless stainless steel lined temperature controlled water bath mounted on a low-profile one inch orbiting platform. The unique chamber design offers simple containment of potential spills. The chamber is completely isolated from electromechanical components. The Sci-ERA Dual Pan Hot Shaker has audible over-temperature alarms and built-in safety features to prevent heater burn-out. An easy-to-use microprocessor controller offers stringent temperature control. (1 per EA )

The Bellco Pipette Plugger is designed for plugging a full range of standardized cotton plugging pipettes. This unit has three speeds and can be adjusted quickly and easily to plug 40, 50 or 60 pipettes per minute. The unit will produce uniform shape cotton plugs, minimizing the problem of tight and loose plugs. Machine is portable with a convenient carrying handle. Time tested design with a precision Geneva mechanism. --Speed Range: 3 Settings, Approximately 40/50/60 Pipettes/Minute --Weight: 19 Lbs. (9.0 Kg) --Operates In: Continuous Or Actuate Mode --Supplied With 1 Bag Of Cotton Roving 7750-22222 (1 per EA )

Adapter Multiple - Two necks parallel, Socket size 19/26, Cone size 24/29 (1 per EA )

United Scientific® Reducing Adapter, Socket 14/20, Cone 19/22 (1 per EA )

Ideal for use with water baths for precise temperature control. Water jacketed low profile OHD vessel with: size: 3l four (4) vertical 45mm sidearms dimensions: 300mm od x 280mm overall height two (2) #4 hose connections material: type 1 class a borosilicate glass supply: 100mm pp blue cap & white silicone liner & four 45mm pp blue caps & pouring rings (1 per EA )

60ml Spare Extractor for Soxhlet Apparatus Socket Size 34/35 Cone Size 24/29 (1 per EA )

Size: 6l Seam welded w/ electropolish finish 3-port w/ siphon, fill & vent tubes Includes: 45mm pp cap & silicone gasket Dimensions: 1/4" OD x .152" ID Longest tube: 10 1/2" at curve (1 per EA )

These stainless steel port assemblies are designed for use with media storage bottles for adding and withdrawing media or liquids. The 2- port models feature a siphon vent tube and is supplied with a 45mm polypropylene blue open top screw cap and white silocone liner. DESIGNED FOR 5637 AND 5639 MEDIA STORAGRE BOTTLES. -WELDED, 316L STAINLESS STEEL CONSTRUCTION, 1/4" INCH OD TUBING. -ELECTROPOLISHED FINISH, CONTINUOUS SEAL WELD. -TWO PORT MODEL FEATURES SIPHON AND VENT TUBES. -LONG TUBE: 10" (1 per EA )