Glassware

Short Path Distillation Set, Glass ware only. 21 peice (21 per PK )

Made from soda lime glass (1.8 mm thick), fine ground and flame polished edges. (10 per PK )

Heavy gauge rectangular construction for easy stacking and storage. These pipette cans can be sterilized by autoclave or dry heat. (do not exceed 400 degrees F). Includes silicone pad on the inside of top and bottom to protect pipette tips. --Satin finish surface of entire can for convenient marking or coding. --Silicone pads on inside of top and bottom protect pipette tips. --Material: 304 stainless steel .031” thick (1 per EA )

Joint Clips, Joint size 14/23, Colour Yellow (1 per EA )

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8" ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. Specifications: Jacket Volume (mL): 1300ml Cap Size: 100mm Sidearm Cap Size (mm): 45 OD x OAH: 200x330mm (1 per EA )

Volumetric Pipets, 100 mL (6 per PK )

Made from clear flint glass (1.8 to 2.0 mm thick), fine ground and polished edges. (12 per PK )

Bellco Magnetic Stirrers are specifically designed for growing both mammalian and bacterial cultures where minimal heat transfer from the magnetic stirrer to the culture vessel is essential. They are ideal for tissue cultures grown in spinner flasks. Bellco incorporates low wattage DC motors to reduce stirrer heat up. Independent power and speed controls allow unit to maintain a speed setting when switched on and off. Powerful magnets rotate on ball bearing shafts for increased coupling and continuous maintenance free service. Polyurethane drive belts resist humidity and temperature. The 100V, 115V & 230V models feature a convenience outlet that allows daisy chaining of up to ten stirrers. Speed range: 30 - 1000 rpm +/- 5% (1 per EA )

Made from clear flint glass (1.8 to 2.0 mm thick), fine ground and polished edges. (12 per PK )

Low Profile Glass Impeller Assembly Size: 3000ml (for low profile 3l vessel) Paddle: 3" tall x 7" wide (1 per EA )

The Lead Rings are perfect for stabilizing vessels and labware or for water bath immersions. (1 per EA)

TUBE, TEST, 12 X 100MM,PK/48 (48 per PK)

Ideal for florescence and con-focal microscopy Size: 25mm round od Material: German glass ( d-263m) 200 areas in diamond pattern Each square measures 0.6mm x 0.6mm Facilitates mounting of micro-manipulated cells or chromosome spreads Line thickness: .02mm (25 per CS )

Adapter Cone/Screw thread - Straight, Cone 14/23 (1 per EA )

40ml Crystallizing Dishes Without Spout, Boro. Glass, Flat Bottom (1 per EA )

Centrifuge Tube 5ml, Conical, height 100mm, OD 13mm, boro. glass (1 per EA )

Test Tube, light wall rimless, 50ml, 150x24mm, Borosilicate glass, PK/24 (24 per PK )

TUBE, CLTRCAP 12X100MM,PK/24 (1 per EA )

Dish Crystallizing, outer dia 100mm, borosilicate glass, flat bottom with spout (1 per EA )

Stirring rod made of soft flint glass, 12" long and 7mm in diameter, with one end flat for use as a spatula or policeman. Sold as a pack of 12. (12 per PK )

SST Sample Port Assyembly for 7l bioreactor systems - English threads Material: 316l SST with electropolish finish - inside & out Tubing specifications: .250" od x .152" id Overall length: 14 5/16" Insertion length: 12 7/8" Supply with SST 3/8-24 nut & o-ring (1 per EA )

150ml Vigrex Column - Screw Thread 19/26 Socket / Cone Size (1 per EA )

United Scientific® Reducing Adapter, Socket 24/40, Cone 45/50 (1 per EA )

Pipette class 'B' 50ml, Borosilicate glass, bulb form, Red (1 per EA )