Glassware

DISH CRYSTALLIZING WITH SPOUT 230MM (1 per EA )

Used to generate a localized cold surface on the exterior of the finger. Commonly used for sublimation, and can also be used in re-flux or distillation operations. 7L. (1 per EA )

Dish Crystallizing, outer dia 70mm, borosilicate glass, flat bottom with spout (1 per EA )

2-port 45mm cap assembly, 8l For 8l 1964 style Over Head Drive vessels Long tube: 1/4"od x 16 1/4" Short tube: 1/4"od x 2.5/32" All tubes extended up 1.0" above the cap slug Supply 45mm s/cap & white silicone liner (1 per EA )

Test Tube with side arm, 150x24mm, boro. glass (1 per EA )

Petri Dish, outer dia 80 x 17mm height, borosilicate glass (1 per EA )

Plates made of clear soda lime glass, 2mm thick, with ground polished edges. Useful for a variety of general laboratory applications including as a cover, mixing surface, etc. (12 per PK )

Adapter Reduction, Socket size 24/29, Cone size 40/38 (1 per EA )

Mohr Measuring Pipets, 10 mL, 0.1 graduation interval (12 per PK )

Pipettes - Glass , Class - A 5 ml with individual work certificate (1 per EA )

Thermowell assembly is manufactured from 316l stainless steel with 32ra finish or better. It can be used with rtd temperature sensor. Includes polypropylene screw cap and silicone gasket. There are also tubes for addition media and vent. Thermowell assemblies attach to the sidearms with a screw cap assembly. Specifications: Material: 316L Stainless Steel 32Ra Finish or Better Includes: Screw Cap & Silicone Gasket (1 per EA )

KIMAX Culture Tube with PTFE-Faced Rubber-Lined Screw Cap Reusable. Features a large marking spot. Threaded phenolic cap can be loosened for autoclaving. (288 per CS )

Flat Bottom Glass Pipette Canister W/Silicone Pad, Manufactured From Borosilicate Glass. All Components Will Withstand Repeated Dry Or Steam Heat Sterilization Bottom Pad Prevents Chipping Of Pipette Tips. Case Qty: 6 (6 per CS )

400ml Spare Extractor for Soxhlet Apparatus Socket Size 50/42 Cone Size 24/29 (1 per EA )

Gas Tube Graduated, Borosilicate glass, cap. 100 x 0.2ml. (1 per EA )

Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

Stopper-Penny Head, borosilicate glass, Solid, Cone 10/19 (1 per EA )

The Bellco Auto-blot Mini Hybridization Oven consists of an incubator with an integral rotisserie device. The rotisserie has the capacity for up to 4 large hybridization bottles or 8 small hybridization bottles. Alternatively, any combination of large or small bottles can be used. This Auto-blot Micro Hybridization Oven features an advanced temperature controller for precise control of oven temperature. 14”x17”x13” (35x42x32cm) Int: 7”x15”x8” (18x37x20cm) 115v. (1 per EA )

Graduated Pipette, USP BBR, AS, Typ 2.5:0.05mL, pk of 12 (12 per PK)

Pipette, Serological, Globe Glass, Reusable, 5mL, To Deliver (TD), 0.1 Graduations, Blue Band, ASTM E1044, 6/Box (6 per PK)

Made from clear flint glass (1.8 to 2.0 mm thick), fine ground and polished edges. (12 per PK )

Manufactured from Type1 Class B Borosilicate Glass. Large opening and sloping shoulders facilitate pouring and cleaning. Heavier walls prevent breakage of glass. Media storage bottles have white graduations and a marking area. They are supplied with rubber lined black phenolic screw cap. Specifications: Type 1 Class B Borosilicate Glass Sizes: 250ml (33)mm Cap OD x OAH: 66 x 149 Case Quantity: 12 (12 per CS )

The Bellco 100 mm Overhead Drive Cap Assembly is manufactured from 316L SST with dual bearings and seals. A dust shield for paddle assemblies (1/4” shaft) is included. Cap assembly features two 1/4” NPT female ports for addition of optional fittings. (1 per EA )

Stopcock, Adapter, Cone/Flexible tubing, Straight connection with Rotaflow key, Cone size 24/29 (1 per EA )