Glassware

Erlenmeyer narrow neck set of 3-50ml,100ml,250ml (1 per EA )

10" Long, 6mm Diameter Glass Stirring Rod (12 per PK )

SST Pitched Blade Impeller Material: 316l SST with electropolish finish English thread OD: 1 3/4" For 5/16" od shafts Usually requires 2 each (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Includes 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Suitable for all cell culture fermentation. Compatible with bellco over head drive and magnetic stirrers. Specifications: Material: Type 1 Class A Borosilicate Glass 100mm Center Neck Baffles: 0 Sidearms: 6 OD x OAH: 410 x 535mm (1 per EA )

Test Tube Flat bottom Glass, 25x 95mm, 30ml, with bakelite screw cap PK/24 (24 per PK )

Stirring rods are made of soft flint glass with both ends fire-polished and rounded (144 per PK )

Still Head Plain, with thermometer socket B14, Cone size to fit flask 29/32 & to fit condenser 19/26 (1 per EA )

Splash Head Vertical Pear Shape, Cone size to fit flask 24/29, to fit condenser 19/26 (1 per EA )

These stainless steel port assemblies are designed for use with media storage bottles for adding and withdrawing media or liquids. The 2- port models feature a siphon vent tube and is supplied with a 45mm polypropylene blue open top screw cap and white silocone liner. DESIGNED FOR 5637 AND 5639 MEDIA STORAGRE BOTTLES. -WELDED, 316L STAINLESS STEEL CONSTRUCTION, 1/4" INCH OD TUBING. -ELECTROPOLISHED FINISH, CONTINUOUS SEAL WELD. -TWO PORT MODEL FEATURES SIPHON AND VENT TUBES. -LONG TUBE: 8 1/2" (1 per EA )

Fraction Distillation Assembly (1 per EA )

Flask Only. For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8" ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. Specifications: Jacket Volume (mL): 40ml Cap Size: 51mm Sidearm Cap Size (mm): 18 OD x OAH: 70x120mm (1 per EA )

Description: Glass Ball Spinner Comp, 1000mL Size: 1000mL Material: Type 1 Class A Borosilicate Glass Flask Dimensions: 135mm OD x 240mm OAH, two 45mm sidearms offset at 60º, 100mm center neck Includes two 45mm blue PP screw caps & two 45mm blue PP pouring rings Impeller Assembly: one 100mm blue PP screw cap, 100mm Teflon cap seal, 100mm blue silicone sealing gasket, soft silicone flex tube, glass ball magnet tube, and magnet Specially Formed Bottom Indent Prevents Accumulation under impeller Glass ball houses a magnet for gentle agitation of Micro carrier Beads (1 per EA )

Manufactured from 316l stainless steel for standard bioreactor vessels. Use with over head drive motors. PADDLE L X W (IN): 3 X 14. (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Bottom pad prevents chipping and breaking of pipette tips. All components can and will withstand repeated dry or steam heat serialization. Supplied stainless steel closure. Case qty-6 (6 per CS )

Low profile 45mm 2-port assembly for vertical low profile 3L vessels Seamed welded – electropolish 316l stainless steel material 32ra finish or better All tubes; .250"od x .152"id Siphon tube (LONG TUBE); 8 1/2" LONG. VENT TUBE: 1". SUPPLY WITH S/CAP (A523-599) & WHITE SILICONE LINER (A523-600) (1 per EA )

Volumetric Pipets, 13 mL (6 per PK )

Gas Generator Kipp's 250ml, borosilicate glass (1 per EA )

These pipettes are made from borosilicate glass in compliance with ASTM specification E-969. Color-coded. Individually serialized and certified. Calibrated to deliver. Printed with durable amber markings. (5 per PK )

Headplate setup stand is for hands-free assembly of bioreactor head plates manufactured from aluminum and measures 8"x8"x3" assembled. Headplate is inserted into the slot on the stand and secured into place with thumbscrews. It holds any head plate up to 6mm thick. (1 per EA )

These Type 3 serological pipettes are made from borosilicate glass and comply with USP standards. Color-coded. Batch certified. Calibrated to deliver. Printed with durable amber markings. (5 per PK )

Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. Sealed internal assembly requires less incubator space. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 100mm Flask size: 15 PADDLE; L X W:9.5 X 6 IN (1 per EA )

Stopcocks Straight Bore PTFE Plug PS Stopcock Size Bore (mm) 2. Plug Size (mm) 11/25 With a 1:5 taper PTFE plug and a threaded pressure nut. The more exaggerated taper permits easier use at higher than ambient temperatures. (1 per EA)

The Bellco Refrigerated Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )

2000 ml Flat Bottom Basin Evaporating Borosilicate Glass 200 mm OD (1 per EA )