Glassware

Adapter Receiver Delivery, Long Stem, Socket size 24/29, Length 200mm (1 per EA )

150ml Crystallizing Dishes Without Spout, Boro. Glass, Flat Bottom (1 per EA )

Eudiometer (1 per EA )

Petri Dish, outer dia 10cm, Soda glass (1 per EA )

Ideal use for over head drive vessels. Description: 3L OHD Impeller Assembly Consists of Paddle, Plug, Paddle Holder, and Drive Shaft. Overall length is adjustable from 8.75”-10.75” with ½” increments. Paddle [A523-206]: PTFE material, 108.0 mm wide x 44.5mm tall x 0.8mm thick Plug [A542-49]: PTFE, 9.5mm OD x 19.1mm long (approx.) Paddle Holder [A542-87]: White PTFE, 184.2mm long x 19.1mm OD Drive Shaft [A542-317]: 316L SST, 158.8mm long x 6.4mm OD (approx.) (1 per EA )

Condenser - Liebig, Length of jacket 40cm, total length 59cm., boro. glass (1 per EA )

45 ml Flat Bottom Basin Evaporating Borosilicate Glass 60 mm OD (1 per EA )

Black Phenolic Screw Cap Assembly For Adjustable Hanging Bar Spinner Flask Black phenolic screw caps are manufactured from specially formulated phenolic resin to resist the effects of temperature and steam autoclaving. They have a non-toxic white rubber liner for all general culture applications. Consists of screw cap liner and stopper or compression fitting. 51mm. (1 per EA )

These leak-proof, economical polypropylene stopcocks have a PTFE plug and serrated ports that accept tubing from 6mm to 10mm in diameter. (6 per PK )

Stainless steel 3L low profile impeller assembly For low profile Over Head Drive vessel Material: SST 316L Electropolish finish, ra 32 or better Fully assembled Paddle dimensions: 2" T X 5 1/4" W (1 per EA )

Bell-ennium Process Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. The Front-End models are designed to position so that one flask is positioned behind the other, minimizing the width of the stirrer for limited space work areas. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. Heavy duty magnet assemblies provide the best magnetic coupling while timing belts on all positions insure smooth even stirring of vessel contents. The low profile chassis measure 11 x 20 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. The PID process controller provides RS-485 communication with your existing lab network (software not included), as well as two alarm outputs for the optional Motion Alarm. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

300mm Bulb Condenser - Screw Thread 24/29 Socket / Cone Size (1 per EA )

Adapters Inlet Thermometer Straight with Hose Connection [standard taper] JointsBottom Top 24/40 24/40. Hose Connection #2. Approx. Overall Height (mm) 155 Hose connection on the side. (1 per EA)

Volumetric Pipets, 4 mL (12 per PK )

Hollow Hex Borosilicate glass Stopper with Round end Cone Size 14/23 (1 per EA )

Soxhlet Extraction Apparatus, cap. 600ml, Flask size 2000ml. (1 per EA )

Centrifuge Tube 10ml, Conical, height 110mm, OD 15mm, boro. glass (1 per EA )

2000ml Spare Extractor for Soxhlet Apparatus Socket Size 55/44 Cone Size 34/35 (1 per EA )

Centrifuge Tube 15ml, Conical, height 120mm, OD 17mm, boro. Glass Pack of 12 (12 per PK )

The Lead Rings are perfect for stabilizing vessels and labware or for water bath immersions. (1 per EA)

The Bellco Digital Mini-Orbital Shaker is a high speed shaker for general laboratory cell culture experimentation. This Bellco design incorporates an orbital platform that accepts a variety of optional trays. Peg and grommet design offers a simple method to install or change trays; four versions of trays are available. Brushless DC motor designed for minimal maintenance. (1 per EA )

Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

Type 1 class a Borosilicate glass for freeze drying or cryogenic storage. The neck has pre-drawn constriction to facilitate sealing. Flat bottom Constriction neck Neck od : 8mm Bottom od: 11mm Capacity: 1ml Length: 145mm (144 per CS )

Petri Dish, outer dia 5cm, Soda glass (1 per EA )