Microcentrifuge tubes are small, usually polypropylene tubes for spinning and storing samples in molecular biology, biochemistry and clinical work. This category covers sizes from 250 µL and 0.5 mL through 0.6, 1.5 and 2.0 mL to 5 mL macro tubes, with attached snap caps, flat tops, lock-top caps and screw caps with O-rings. Options include sterile or non-sterile, graduated or plain, natural, amber, black and colored tubes, self-standing and conical bottoms, low retention tubes and lots certified for the absence of RNase, DNase and pyrogens. Racks and tube-and-pestle sets are listed too.

Choose the volume first, then check that the tube fits your centrifuge rotor or the adapters you have. Pick a screw cap with an O-ring for heating, freezing or shipping, where a snap cap could open, and a snap cap for quick bench work. Use sterile tubes certified for the absence of nucleases for RNA and DNA work, amber or black tubes for light-sensitive samples, and low retention tubes when small volumes must not be lost on the tube wall. Check the maximum g-force rating against your protocol.

Microcentrifuge: common questions

Will 1.5 mL tubes fit any microcentrifuge?

Standard 1.5 mL and 2.0 mL tubes fit the rotors of most microcentrifuges. Smaller 0.5 mL and 0.2 mL tubes usually need adapters or a rotor with matching holes, and 5 mL tubes need a rotor made for them. Screw-cap and self-standing tubes can have a different outer shape, so check the tube dimensions against your rotor before ordering a large quantity.

Should I use snap-cap or screw-cap microtubes?

Snap caps are quick to open and close and suit routine pipetting and short spins. Screw caps with an O-ring seal more securely, so they are a better choice for heating or boiling samples, freezing and thawing, long-term storage and shipping, where pressure or temperature changes could open a snap cap. Screw-cap tubes generally cost more per tube.

What are low retention microcentrifuge tubes?

Low retention tubes have an inner surface made or treated so that less liquid, protein or nucleic acid sticks to the tube wall. They help when you work with small volumes, dilute samples or costly reagents, because more of the sample can be recovered. For ordinary buffers and larger volumes, standard tubes are usually adequate.

Microcentrifuge

Filters
Set Descending Direction

766 items

Page
per page
View as List Grid
  1. Rack for 0.5mL Microcentrifuge Tubes, Stackable, Polycarbonate (PC), 24-Place, Clear
    Manufacturer: Globe Scientific
    Rack for 0.5mL Microcentrifuge Tubes, Stackable, Polycarbonate (PC), 24-Place, Clear (8 per CS)
    Learn More
    was $251.30 Special Price $183.24
  2. 1.5mL Micro Centrifuge Tube, Amber, Non-sterile, 500/bag, CS500
    Manufacturer: CELLTREAT Scientific Products
    All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand Color tubes allow for quick sample identification, or to customize workflows (500 per CS )
    Learn More
    was $70.00 Special Price $47.40
  3. 1.5mL Flat Top Microcentrifuge Tube, Rainbow, PK500
    SKU: 4310-PK
    Manufacturer: Bio Plas
    Flat Top Microcentrifuge Tube 1.5mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 22000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 1.5mL. Rainbow color. (500 per PK)
    Learn More
    was $26.92 Special Price $23.55
  4. CAP ONLY, Screw Top Micro Tube Cap, O-Ring, Translucent, Assorted Colors, Non-sterile, CS1000
    Manufacturer: CELLTREAT Scientific Products
    Translucent and Opaque Cap O-rings ensure leak-proof seal, and are a highly visible contrasting color All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)
    Learn More
    was $182.00 Special Price $134.17
  5. 0.6mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Lavender, PK500
    Manufacturer: Bio Plas
    The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)
    Learn More
    was $120.95 Special Price $105.83
  6. CAP ONLY, Screw Top Micro Tube Cap, Grip Cap With Integrated O-Ring, Blue, Non-sterile, CS1000
    Manufacturer: CELLTREAT Scientific Products
    Premium Grip Cap features molded TPE sealing rings which ensure O-ring will never slip out of place; striped TPE grips on cap edge enable secure handling under all conditions Caps are available in various colors for easy identification and color-coding All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)
    Learn More
    was $182.00 Special Price $134.17
  7. 0.5mL Flat Top Microcentrifuge Tube, Orange, PK500
    SKU: 4321-PK
    Manufacturer: Bio Plas
    MICROCENT.TUBES 0.5ML ORNPK500Bio Plas flat top microcentrifuge tube 0.5 ml orange. (500 per PK)
    Learn More
    was $22.18 Special Price $19.41
  8. 5mL Flat Top Microcentrifuge Tube (4 bags of 50 tubes per pack), Assorted*, PK200
    SKU: 4401-PK
    Manufacturer: Bio Plas
    5mL Flat Top Microcentrifuge Tube (4 bags of 50 tubes per pack), Assorted*, PK200 (200 per PK)
    Learn More
    was $122.35 Special Price $107.06
  9. 1.5mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Rainbow, PK500, CS10000
    Manufacturer: Bio Plas
    The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)
    Learn More
    was $2,505.33 Special Price $2,192.17
  10. Conical 2.0mL, with skirt Screw Cap Microcentrifuge Tube - Sterile, Amber, CS1000
    Manufacturer: Bio Plas
    Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per CS)
    Learn More
    was $538.73 Special Price $471.39
  11. 1.5mL Flat Top Microcentrifuge Tube, Red, PK500
    SKU: 4301-PK
    Manufacturer: Bio Plas
    MICROCENT.TUBES 1.5ML REDPK500Bio Plas flat top microcentrifuge tube 1.5 ml red. (500 per PK)
    Learn More
    was $22.18 Special Price $19.41
  12. Loop-cap 1.5mL Microtube, 10 bags of 100 tubes, 1000/cs
    Manufacturer: MTC Bio
    Loop-cap 1.5mL Microtube, 10 bags of 100 tubes, 1000/cs (1000 per CS )
    Learn More
    was $202.23 Special Price $147.23
  13. Microtube, 0.5mL, Attached Screw Cap for Color Insert, with O-Ring, STERILE, PP, 100/Bag, 10 Bags/Unit
    Manufacturer: Globe Scientific
    Microtube, 0.5mL, Attached Screw Cap for Color Insert, with O-Ring, STERILE, PP, 100/Bag, 10 Bags/Unit, CS1000 (1000 per CS)
    Learn More
    was $469.70 Special Price $342.49
  14. 5mL Macro Centrifuge Tube, Snap-Pop, Clear, Non-sterile
    Manufacturer: CELLTREAT Scientific Products
    5mL Macro Centrifuge Tube, Snap-Pop, Clear, Non-sterile (100 per CS )
    Learn More
    was $56.00 Special Price $40.10
  15. Microcentrifuge Tube, 1.5mL, PP, Attached Snap Cap, Graduated, Assorted Colors, Certified: Rnase, Dnase and Pryogen Free, 500/Stand Up Zip Lock Bag
    Manufacturer: Globe Scientific
    Microcentrifuge Tube, 1.5mL, PP, Attached Snap Cap, Graduated, Assorted Colors, Certified: Rnase, Dnase and Pryogen Free, 500/Stand Up Zip Lock Bag, PK500 (500 per PK)
    Learn More
    was $26.10 Special Price $19.04
  16. 0.5mL Flat Top Microcentrifuge Tube, Blue, PK500
    SKU: 4318-PK
    Manufacturer: Bio Plas
    MICROCENT.TUBES 0.5ML BLUPK500Bio Plas flat top microcentrifuge tube 0.5 ml blue. (500 per PK)
    Learn More
    was $22.18 Special Price $19.41
  17. Microtb 0.5 Rnase-Fr Pk100
    Manufacturer: Kimble Chase
    Microtube RNase DNase and pyrogen free for grinding soft tissues and resuspension of protein and DNA pellets. Eliminate need for pretreatment of microtubes. 0.5mL.
    Learn More
    was $72.63 Special Price $72.04
  18. Microtube w/ cap, 1.5mL, green, sterile, w/ self-standing & Stop-Pops™, 500/pk
    Manufacturer: MTC Bio
    Microtube w/ cap, 1.5mL, green, sterile, w/ self-standing & Stop-Pops™, 500/pk (500 per PK )
    Learn More
    was $19.71 Special Price $14.24
  19. Microcentrifuge Tube, 0.5mL, PP, Attached Locking Snap Cap, Graduated, Natural, Lot Certified: Rnase, Dnase, Pryogen, ATP and Human DNA Free
    Manufacturer: Globe Scientific
    Microcentrifuge Tube, 0.5mL, PP, Attached Locking Snap Cap, Graduated, Natural, Lot Certified: Rnase, Dnase, Pryogen, ATP and Human DNA Free, PK500 (500 per PK)
    Learn More
    was $40.20 Special Price $29.32
  20. 2.0mL Micro Centrifuge Tube, Low Retention, Non-sterile
    Manufacturer: CELLTREAT Scientific Products
    2.0mL Micro Centrifuge Tube, Low Retention, Non-sterile (500 per CS )
    Learn More
    was $77.00 Special Price $28.43
  21. 0.6mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Green, PK500
    Manufacturer: Bio Plas
    The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)
    Learn More
    was $120.95 Special Price $105.83
  22. Pestle in 1.5mL G-Tube™ (Blue Pestle/Natural Tube)
    Manufacturer: Bio Plas
    Pestle in 1.5mL G-Tube™ (Blue Pestle/Natural Tube) (250 per CS)
    Learn More
    was $332.08 Special Price $290.58
  23. Microcentrifuge Tube, 0.5mL, PP, Attached Snap Cap, Graduated, Violet, Certified: Rnase, Dnase and Pyrogen Free, 500/Stand Up Zip Lock Bag
    Manufacturer: Globe Scientific
    Microcentrifuge Tube, 0.5mL, PP, Attached Snap Cap, Graduated, Violet, Certified: Rnase, Dnase and Pyrogen Free, 500/Stand Up Zip Lock Bag (10000 per CS)
    Learn More
    was $508.60 Special Price $370.85
  24. 1.5 mL SuperSpin® Microcentrifuge Tubes, Assorted Colors, in Resealable Bags, CS5000
    Manufacturer: Labcon North America
    Spins to 40,000 RCF. Includes flat caps and writing surface. In resealable bags. 1.5ml maximum usable volume. Assorted colors. (5000 per CS )
    Learn More
    was $257.05 Special Price $224.92
Filters
Set Descending Direction

766 items

Page
per page
View as List Grid