Microcentrifuge tubes are small, usually polypropylene tubes for spinning and storing samples in molecular biology, biochemistry and clinical work. This category covers sizes from 250 µL and 0.5 mL through 0.6, 1.5 and 2.0 mL to 5 mL macro tubes, with attached snap caps, flat tops, lock-top caps and screw caps with O-rings. Options include sterile or non-sterile, graduated or plain, natural, amber, black and colored tubes, self-standing and conical bottoms, low retention tubes and lots certified for the absence of RNase, DNase and pyrogens. Racks and tube-and-pestle sets are listed too.

Choose the volume first, then check that the tube fits your centrifuge rotor or the adapters you have. Pick a screw cap with an O-ring for heating, freezing or shipping, where a snap cap could open, and a snap cap for quick bench work. Use sterile tubes certified for the absence of nucleases for RNA and DNA work, amber or black tubes for light-sensitive samples, and low retention tubes when small volumes must not be lost on the tube wall. Check the maximum g-force rating against your protocol.

Microcentrifuge: common questions

Will 1.5 mL tubes fit any microcentrifuge?

Standard 1.5 mL and 2.0 mL tubes fit the rotors of most microcentrifuges. Smaller 0.5 mL and 0.2 mL tubes usually need adapters or a rotor with matching holes, and 5 mL tubes need a rotor made for them. Screw-cap and self-standing tubes can have a different outer shape, so check the tube dimensions against your rotor before ordering a large quantity.

Should I use snap-cap or screw-cap microtubes?

Snap caps are quick to open and close and suit routine pipetting and short spins. Screw caps with an O-ring seal more securely, so they are a better choice for heating or boiling samples, freezing and thawing, long-term storage and shipping, where pressure or temperature changes could open a snap cap. Screw-cap tubes generally cost more per tube.

What are low retention microcentrifuge tubes?

Low retention tubes have an inner surface made or treated so that less liquid, protein or nucleic acid sticks to the tube wall. They help when you work with small volumes, dilute samples or costly reagents, because more of the sample can be recovered. For ordinary buffers and larger volumes, standard tubes are usually adequate.

Microcentrifuge

Filters
Set Descending Direction

766 items

Page
per page
View as List Grid
  1. 1.5mL Micro Centrifuge Tube, Blue, Non-sterile, 500/bag, CS500
    Manufacturer: CELLTREAT Scientific Products
    All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand Color tubes allow for quick sample identification, or to customize workflows (500 per CS )
    Learn More
    was $73.00 Special Price $49.58
  2. Tube Microcent 1.5ml Bulk 10-BG/500
    Manufacturer: Dynalon
    Tube Microcent 1.5ml Bulk 10-BG/500 (5000 per CS )
    Learn More
    was $168.20 Special Price $113.57
  3. TUBE ONLY, 2.0mL Screw Top Micro Tube, Conical Bottom, Graduated, Non-sterile, CS1000
    Manufacturer: CELLTREAT Scientific Products
    High temperature resistivity range–shatter/crack resistant and ideal for boiling Easy 3/4 turn to open and close Caps are available separately in various colors for easy identification and color-coding All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match Grip band tubes feature ribs that provide exceptional gripping surface and lessen movement during centrifugation (1000 per CS)
    Learn More
    was $98.00 Special Price $71.46
  4. CAP ONLY, Screw Top Micro Tube Cap, Grip Cap With Integrated O-Ring, Clear, Non-sterile, CS1000
    Manufacturer: CELLTREAT Scientific Products
    Premium Grip Cap features molded TPE sealing rings which ensure O-ring will never slip out of place; striped TPE grips on cap edge enable secure handling under all conditions Caps are available in various colors for easy identification and color-coding All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)
    Learn More
    was $182.00 Special Price $134.17
  5. CAP ONLY, Screw Top Micro Tube Cap, Grip Cap With Integrated O-Ring, Green, Non-sterile, CS1000
    Manufacturer: CELLTREAT Scientific Products
    Premium Grip Cap features molded TPE sealing rings which ensure O-ring will never slip out of place; striped TPE grips on cap edge enable secure handling under all conditions Caps are available in various colors for easy identification and color-coding All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)
    Learn More
    was $182.00 Special Price $134.17
  6. Microcentrifuge Tube, 1.5mL, PP, Attached Snap Cap, Graduated, Blue, Certified: Rnase, Dnase and Pyrogen Free, 500/Stand Up Zip Lock Bag
    Manufacturer: Globe Scientific
    Microcentrifuge Tube, 1.5mL, PP, Attached Snap Cap, Graduated, Blue, Certified: Rnase, Dnase and Pyrogen Free, 500/Stand Up Zip Lock Bag (10000 per CS)
    Learn More
    was $516.90 Special Price $376.91
  7. Rack for 1.5mL and 2.0mL Microcentrifuge Tubes, Stackable, Polycarbonate, PC, 24-Place, Blue
    Manufacturer: Globe Scientific
    Rack for 1.5mL and 2.0mL Microcentrifuge Tubes, Stackable, Polycarbonate (PC), 24-Place, Blue, EA1 (1 per EA)
    Learn More
    was $31.70 Special Price $23.11
  8. Microcentrifuge Tube, 0.5mL, PP, Attached Snap Cap, Graduated, Blue, Certified: Rnase, Dnase and Pyrogen Free, 500/Stand Up Zip Lock Bag
    Manufacturer: Globe Scientific
    Microcentrifuge Tube, 0.5mL, PP, Attached Snap Cap, Graduated, Blue, Certified: Rnase, Dnase and Pyrogen Free, 500/Stand Up Zip Lock Bag (10000 per CS)
    Learn More
    was $508.60 Special Price $370.85
  9. United Scientific™ Micro Centrifuge Tubes, PP, 0.5ml, Natural
    Manufacturer: United Scientific Supplies
    Made from high-quality virgin polypropylene, these Micro Centrifuge Tubes are RNase, DNase and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted sur (1000 per PK )
    Learn More
    was $27.90 Special Price $20.35
  10. 0.5mL Flat Top Microcentrifuge Tube, Blue, CS10000
    SKU: 4318-CS
    Manufacturer: Bio Plas
    MICROCENT.TUBES 0.5ML BLUPK500Bio Plas flat top microcentrifuge tube 0.5 ml blue.
    Learn More
    was $443.67 Special Price $388.21
  11. Tubes 0.2ml PCR AttachFlatCapsNat10-U/1k
    Manufacturer: Dynalon
    Tubes 0.2ml PCR AttachFlatCapsNat10-U/1k (10000 per CS )
    Learn More
    was $332.17 Special Price $224.27
  12. Tube 0.5mL stand amber-t/cap 10-BG/500
    Manufacturer: Dynalon
    Tube 0.5mL stand amber-t/cap 10-BG/500 (5000 per CS )
    Learn More
    was $828.36 Special Price $559.27
  13. CAP ONLY, Screw Top Micro Tube Cap, Grip Cap With Integrated O-Ring, Purple, Non-sterile, CS1000
    Manufacturer: CELLTREAT Scientific Products
    Premium Grip Cap features molded TPE sealing rings which ensure O-ring will never slip out of place; striped TPE grips on cap edge enable secure handling under all conditions Caps are available in various colors for easy identification and color-coding All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)
    Learn More
    was $182.00 Special Price $134.17
  14. Rack Microcentrifuge Tube, HDPP 0.5mL
    Manufacturer: Dynalon
    Economy microcentrifuge tube racks allow storage of 20 micro test tubes and are available in two models, one for 1.5 ml tubes and one for 0.5 ml tubes. (6 per CS)
    Learn More
    was $163.75 Special Price $110.55
  15. Wireless MicroTube Rack with Handles for 1.5mL and 2.0mL Microcentrifuge Tubes, 96-Place, Red
    Manufacturer: Globe Scientific
    Wireless MicroTube Rack with Handles for 1.5mL and 2.0mL Microcentrifuge Tubes, 96-Place, Red (4 per CS)
    Learn More
    was $106.30 Special Price $77.51
  16. 2.0mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Green, PK500, CS10000
    Manufacturer: Bio Plas
    The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)
    Learn More
    was $2,470.33 Special Price $2,161.54
  17. Wireless MicroTube Rack with Handles for 1.5mL and 2.0mL Microcentrifuge Tubes, 24-Place, Blue
    Manufacturer: Globe Scientific
    Wireless MicroTube Rack with Handles for 1.5mL and 2.0mL Microcentrifuge Tubes, 24-Place, Blue, EA1 (1 per EA)
    Learn More
    was $17.60 Special Price $12.83
  18. Microcentrifuge Tube, 2.0mL, PP, Attached Snap Cap, Graduated, Green, Certified: Rnase, Dnase and Pryogen Free, 500/Stand Up Zip Lock Bag
    Manufacturer: Globe Scientific
    Microcentrifuge Tube, 2.0mL, PP, Attached Snap Cap, Graduated, Green, Certified: Rnase, Dnase and Pryogen Free, 500/Stand Up Zip Lock Bag, PK500 (500 per PK)
    Learn More
    was $31.30 Special Price $22.83
  19. Microcentrifuge Tube, 2mL, PP, Attached Flat Top Cap, Graduated, Amber, 500/Bag, 10 Bags/Unit
    Manufacturer: Globe Scientific
    These polyropylene microcentrifuge tubes feature attached leak-resistant flat snap caps. Each tube is molded with precise graduation marks for accurate measurements. They are available in amber and assorted colors. (5000 per CS)
    Learn More
    was $561.40 Special Price $409.35
  20. 0.6mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Red, PK500
    Manufacturer: Bio Plas
    The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)
    Learn More
    was $120.95 Special Price $105.83
  21. 2.0mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Amber, PK500
    Manufacturer: Bio Plas
    The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)
    Learn More
    was $123.52 Special Price $108.08
  22. 1.5mL Graduated Screw Cap Tube, Conical Base, Writing Area, Clear, PK500
    Manufacturer: Bio Plas
    Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per PK)
    Learn More
    was $72.55 Special Price $63.48
  23. 2.0mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Red, PK500, CS10000
    Manufacturer: Bio Plas
    The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)
    Learn More
    was $2,470.33 Special Price $2,161.54
  24. United Scientific™ Racks For Microcentrifuge Tubes, 24 Places, PC
    Manufacturer: United Scientific Supplies
    Polycarbonate racks hold 1.5ml microcentrifuge tubes. Unique design allows racks to be securely stacked on top of each other. Includes alphanumeric grid for easy identification of tubes. Autoclavable. (4 per PK )
    Learn More
    was $47.10 Special Price $35.70
Filters
Set Descending Direction

766 items

Page
per page
View as List Grid