Microcentrifuge tubes are small, usually polypropylene tubes for spinning and storing samples in molecular biology, biochemistry and clinical work. This category covers sizes from 250 µL and 0.5 mL through 0.6, 1.5 and 2.0 mL to 5 mL macro tubes, with attached snap caps, flat tops, lock-top caps and screw caps with O-rings. Options include sterile or non-sterile, graduated or plain, natural, amber, black and colored tubes, self-standing and conical bottoms, low retention tubes and lots certified for the absence of RNase, DNase and pyrogens. Racks and tube-and-pestle sets are listed too.

Choose the volume first, then check that the tube fits your centrifuge rotor or the adapters you have. Pick a screw cap with an O-ring for heating, freezing or shipping, where a snap cap could open, and a snap cap for quick bench work. Use sterile tubes certified for the absence of nucleases for RNA and DNA work, amber or black tubes for light-sensitive samples, and low retention tubes when small volumes must not be lost on the tube wall. Check the maximum g-force rating against your protocol.

Microcentrifuge: common questions

Will 1.5 mL tubes fit any microcentrifuge?

Standard 1.5 mL and 2.0 mL tubes fit the rotors of most microcentrifuges. Smaller 0.5 mL and 0.2 mL tubes usually need adapters or a rotor with matching holes, and 5 mL tubes need a rotor made for them. Screw-cap and self-standing tubes can have a different outer shape, so check the tube dimensions against your rotor before ordering a large quantity.

Should I use snap-cap or screw-cap microtubes?

Snap caps are quick to open and close and suit routine pipetting and short spins. Screw caps with an O-ring seal more securely, so they are a better choice for heating or boiling samples, freezing and thawing, long-term storage and shipping, where pressure or temperature changes could open a snap cap. Screw-cap tubes generally cost more per tube.

What are low retention microcentrifuge tubes?

Low retention tubes have an inner surface made or treated so that less liquid, protein or nucleic acid sticks to the tube wall. They help when you work with small volumes, dilute samples or costly reagents, because more of the sample can be recovered. For ordinary buffers and larger volumes, standard tubes are usually adequate.

Microcentrifuge

Filters
Set Descending Direction

11 Items

per page
View as List Grid
  1. 5ml Centrifuge Tubes, Clear, Round Bottom, Snap Cap, non-terile. 200/pk, 2000/case
    Manufacturer: Nest Scientific
    USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (2000 per CS )
    Learn More
    was $329.48 Special Price $294.06
  2. 0.6ml Microcentrifuge Tube, Clear, Conical, Lock Cap,1000/pk, 10000/cs
    Manufacturer: Nest Scientific
    USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (10000 per CS )
    Learn More
    $211.70
  3. 2.0ml Microcentrifuge Tube, Clear, Round, Lock Cap, 500/pk, 5000/cs
    Manufacturer: Nest Scientific
    USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (5000 per CS )
    Learn More
    was $246.81 Special Price $220.28
  4. 5ml Centrifuge Tubes, Clear, Round Bottom, Snap Cap, Sterile, 200/pk, 2000/case
    Manufacturer: Nest Scientific
    USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (2000 per CS )
    Learn More
    was $358.80 Special Price $320.23
  5. 1.5ml Microcentrifuge Tube, Clear, Sterile, Conical, Lock Cap, 500/pk, 4000/cs
    Manufacturer: Nest Scientific
    USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (4000 per CS )
    Learn More
    was $225.69 Special Price $201.43
  6. Microtube Box, 1.5ml/2ml, 8*8, 5/Pack, 40/Case
    Manufacturer: Nest Scientific
    The vial body is made of medical-grade cryogenic polypropylene (PP), which meets USP Class-6 standards, so that the vial is recommended to be used in -196 liquid nitrogen phase. Dnase/Rnase free, non-endotoxin. Electron beam sterilization, SAL = 10 -6. The product meets the SBS standard and provides an effective safety guarantee and management for biological sample libraries and other warehouses of various chemicals and biological products stored at low temperatures. (40 per CS )
    Learn More
    was $243.46 Special Price $217.29
  7. 0.6ml Microcentrifuge Tube, Amber Color, Conical, Lock Cap, non-terile. 50/bag, 7500/case
    Manufacturer: Nest Scientific
    USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (7500 per CS )
    Learn More
    was $377.00 Special Price $336.47
  8. 0.6ml Microcentrifuge Tube, Clear, Sterile, Conical, Lock Cap, 50/bag, 750/pk, 7500/cs
    Manufacturer: Nest Scientific
    Sterilized by E-beam, SAL=10-6. High clarity, 100% virgin polystyrene. “TC” refers to vacuum plasma tissue culture treatment. Clear lot number for batch traceability. Markings of well coordinates available for 12, 24, 48, 96 and 384 well plates. Non-Pyrogenic, DNase/Rnase free. (7500 per CS )
    Learn More
    $218.12
  9. 2.0ml Microcentrifuge Tube, Clear, Sterile, Round, Lock Cap, 50/bag, 400/pk, 4000/cs
    Manufacturer: Nest Scientific
    USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (4000 per CS )
    Learn More
    was $236.67 Special Price $211.23
  10. 1.5ml Microcentrifuge Tube, Amber Color, Conical, Lock Cap, non-terile. 50/bag, 4000/case
    Manufacturer: Nest Scientific
    USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (4000 per CS )
    Learn More
    was $246.81 Special Price $220.28
  11. 1.5ml Microcentrifuge Tube, Clear, Conical, Lock Cap, 500/pk, 5000/cs
    Manufacturer: Nest Scientific
    USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (5000 per CS )
    Learn More
    was $238.30 Special Price $212.69
Filters
Set Descending Direction

11 Items

per page
View as List Grid