Microcentrifuge

Rack, Snap Together, for 1.5mL and 2.0mL Microcentrifuge Tubes, Reinforced PP, 128-Place, White, EA1 (1 per EA)

Rack for 0.5mL Microcentrifuge Tubes, Stackable, Polycarbonate (PC), 24-Place, Blue, EA1 (1 per EA)

Reversible Rack for Microcentrifuge Tubes, 80-Place for 1.5mL and 2.0mL and Reverse Side is 60-Place for 0.2mL and 0.5mL Tubes, Orange, 5/Pack, PK5 (5 per PK)

Microcentrifuge Tube, 1.5mL, PP, Attached Snap Cap, Graduated, Natural, Lot Certified: Rnase, Dnase, Pryogen, ATP and Human DNA Free (10000 per CS)

Macrocentrifuge Tube, 5.0mL, PP, Attached Snap Cap, Graduated, Yellow, 50/Bag, 4 Bags/Unit, CS200 (2000 per CS)

Rack for 0.5mL Microcentrifuge Tubes, Stackable, Polycarbonate (PC), 24-Place, Orange, EA1 (1 per EA)

MICROTUBE RACKS 80-WELL Popular fraction-collector-plate style rack Made of polypropylene Easily fill and transfer 80 tubes in compact arrangement Compact arrangement (5 x 16 array) Molded-in coordinates to aid organization Autoclavable (5 per PK )

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (4000 per CS )

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (5000 per CS )

An efficient and economical alternative to 15mL conical tubes when working with sample volumes between 2.0mL and 5.0mL. (200 per PK)

Macrocentrifuge Tube, 5.0mL, PP, Attached Locking Snap Cap, Graduated, Natural, Lot Certified: Rnase, Dnase, Pryogen, ATP and Human DNA Free, PK100 (100 per PK)

Biologix 1.5ml clear polypropylene non-sterile (rnase & dnase free) conical bottom microcentrifuge tubes with attached flat caps. tubes have frosted writing area and marked graduations. 500 tubes/pack, 10 packs/case (5000 per CS )

Centrifuge Tube Micro, Cap. 2ml., pk of 500 (1 per EA )

Gel Crusher™ Spin Column / Strainer Basket, ten 600µm pores, PP, for gel fragmentation and gel breaking processes, fits 2mL receiver tubes, 200/pk (200 per CS )

Five-O™ 5mL Screw-cap MacroTube®, sterile, w/ attached screw caps in foam racks, Opaque Black, 500/cs (500 per CS )

Microcentrifuge Tube, 0.5mL, PP, Attached Snap Cap, Graduated, Assorted Colors, Certified: Rnase, Dnase and Pryogen Free, 500/Stand Up Zip Lock Bag, PK500 (500 per PK)

Microcentrifuge tube rack, holds 20, 1.5mL tubes, pack of 1 (1 per EA)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per CS)

All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand (1000 per CS)

All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand 1.5mL opaque black tube protects light sensitive compounds (1000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

Rack for 0.5mL Microcentrifuge Tubes, Stackable, Polycarbonate (PC), 24-Place, Clear (8 per CS)

All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand Color tubes allow for quick sample identification, or to customize workflows (500 per CS )