Lab Procurement Services offers a comprehensive range of high-quality, affordable constant temperature equipment to handle a variety of applications.  Please see individual categories for

As well as the Parts and Accessories sections.  Our experts are here to help with product selection and quotations - give us a call, or set up a meeting!

Before ordering, check the temperature range against your method: the digital water baths here cover ambient +5° to 99°C, while refrigerated circulators reach -30°C at the low end and up to 170°C at the high end. Compare bath volume, and for chillers the cooling capacity (in kW or HP) and pump type, since the DuraChill CA chillers are listed with either a turbine or a positive displacement pump. Confirm voltage and frequency (120V 60Hz, 208-240V or 230V). Plan for the bath fluid too, such as polycool glycol mixes for below-ambient work and algae inhibitor for water baths, plus the fittings, lids and bypass kits your setup needs.

Constant Temperature: common questions

What is constant temperature equipment?

Constant temperature equipment holds samples, vessels or connected instruments at a set temperature. It includes water and bead baths, heated and refrigerated circulators, recirculating chillers, immersion coolers, general-purpose, CO2 and shaking incubators, humidity test chambers and plant growth chambers. The right choice depends on temperature range, stability, capacity, and whether you need to heat, cool or both.

What is the difference between a circulator and a chiller?

A circulator has a bath with a heater, often refrigeration, and a pump that can control the bath itself or circulate fluid through external equipment. A recirculating chiller is mainly built to remove heat, supplying cooled fluid to equipment such as rotary evaporators, condensers or lasers. Chillers typically focus on cooling capacity, while circulators offer wider temperature ranges and their own working bath.

What fluid should I use in a lab bath or circulator?

Distilled or deionized water is commonly used for moderate temperatures, often with an algae inhibitor to keep the bath clean. For temperatures near or below freezing, a water and glycol mix is typical, and specialty fluids or oils are used at higher temperatures. Use a fluid rated for your full operating range and approved by the equipment manufacturer.

Can I get a quote on a chiller or incubator?

Yes. Volume and quote pricing is available through the Contact Us page, and approved business accounts can pay by purchase order. Larger equipment often ships directly from the manufacturer, so lead times vary by item. Include the model, voltage and quantity in your request so the quote matches what you need.

Constant Temperature

Filters
Set Descending Direction

586 items

Page
per page
View as List Grid
  1. Immersion Probe Cooler, IP-60, 1.5” Ø Rigid Coil Probe, (-60° to -20°C), 120V, 60Hz
    Manufacturer: Polyscience Corp
    Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)
    Learn More
    was $3,134.25 Special Price $2,939.93
  2. CO2 INCUBATOR, WATER JACKET, 6 CU FT, ECONOMY, IR, 115V
    Manufacturer: Sheldon Manufacturing
    Weight:260 lbs Overtemperature Alarm:Yes Access Port:1.75 inches Shelving:3 Supplied (16 Maximum) Relative Humidity Range:up to 95% Jacket Type:Water CO2 Recovery Rate:< 5 minutes CO2 Sensor:IR CO2 Range:0-20% Temperature Uniformity:+/-0.2°C at 37°C Temperature Range:Ambient +8°C to 60°C Exterior Dimensions WxDxH in. (cm):26.0 x 26.3 x 40.3 (66.0 x 66.7 x 102.2) Interior Dimensions WxDxH in. (cm):20.2 x 19.7 x 25.2 (51.4 x 50.1 x 64.1) Capacity:6 Cu.Ft. (171 L) Maximum Energy Consumption (W):600 Split Inner Glass Chamber Door:Optional Data Logging Capabilities:Yes All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time. (1 per EA)
    Learn More
    $7,857.00
  3. Open Bath, 20L, Stainless Steel, MX (Ambient +10° to 135°C), 120V, 60Hz
    Manufacturer: Polyscience Corp
    Key Features: Large, universal icon and English display On-screen prompts Single-point calibration capability (1 per EA)
    Learn More
    was $2,205.50 Special Price $2,068.76
  4. Fitting, 1/2” (13 mm) barb x 1/4” (6 mm) barb, glass filled nylon (for MX Controllers)
    Manufacturer: Polyscience Corp
    Fitting, 1/2in., 13 mm barb x 1/4in., 6 mm barb, glass filled nylon, for MX Controllers EA /1 (1 per EA)
    Learn More
    $5.51
  5. BEAD BATH 6 L, 120 V, TYPE B PLUG W/ 5 L BEADS, Liters/EA: 6
    Manufacturer: Sheldon Manufacturing
    Weight:44 lbs Agency Approval:TUV - CUE Temperature Uniformity:+/- 1.0ºC Temperature Range:Ambient +5ºC to 80ºC Exterior Dimensions WxDxH in. (cm):15.9x12.3x8.5 (40.4x31.2x21.6) Interior Dimensions WxDxH in. (cm):12x6x6 (30.5x15.2×15.2) Capacity:5 Liters (1 per EA)
    Learn More
    was $1,762.25 Special Price $1,683.84
  6. MyTemp™ Mini Digital Incubator, with heating only 230V
    Manufacturer: Benchmark Scientific
    MyTemp Mini Digital Incubator, with heating only 230V, EA /1 (1 per EA)
    Learn More
    was $648.56 Special Price $578.84
  7. BeadBath Duo, 2L bath, 115V
    Manufacturer: Benchmark Scientific
    The BeadBath Duo series are the first laboratory baths designed for precision temperature control when used with water, or with (the increasingly popular) Lab Armor® thermal beads. Unlike any other laboratory bath, they feature a “MODE” button that can be (1 per EA)
    Learn More
    was $864.92 Special Price $771.95
  8. Roll-in Shelf Cart 2 shelf
    Manufacturer: Bellco Glass Inc
    The Bellco Roll-in Shelf cart is a mobile unit designed for transporting glass-ware & equipment from one location to another or as an easy method of loading the Bellco Roll-in Incubator. The cart is mounted on four (4) heavy duty bearing swivel castors able to support approx. 750lbs. The loaded cart can easily be rolled in the Bellco Roll-in Incubator via the castor guides located on the incubator interior floor. The cart comes with two (2) vented shelves which are adjustable & may be mounted at 6 1/8" intervals along the corner support posts. Additional shelves may be ordered under part number D504-1. The cart is capable of supporting two (2) 36 liter & two (2) 15 liter spinner flasks complete with OHD drives or a variety of smaller flasks & other assorted laboratory equipment. The cart is constructed of 1/8" aluminum & is finished with an Olivetti white textured paint. The unit is shipped un-assembled in a flat carton & is easily assembled with ordinary had tools. (not supplied). HEIGHT: 55 1/2" (141cm) WIDTH: 32 3/34" (83.2cm) (1 per EA )
    Learn More
    $1,741.09
  9. Single Window Roll-In Incubator, 115V
    Manufacturer: Bellco Glass Inc
    Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )
    Learn More
    $10,620.34
  10. Water Chiller Smart H150-1000 115V, EA /1
    Manufacturer: LabTech
    Water Chiller Smart H150-1000 115V (1 per EA)
    Learn More
    $3,830.32
  11. Test Tube rack for 30 x 50 ml tubes
    Manufacturer: Benchmark Scientific
    Test Tube rack for 30 x 50 ml tubes, EA /1 (1 per EA)
    Learn More
    was $248.43 Special Price $235.49
  12. Water Bath, 2L Digital, (Ambient +5° to 99°C), 120V, 60Hz
    Manufacturer: Polyscience Corp
    Key Features: Displays actual and set point temperature simultaneously Programmable pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration off-set feature Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads All 220-240V units are compatible with both 50Hz and 60Hz electrical systems (1 per EA )
    Learn More
    was $657.00 Special Price $616.27
  13. polyclean CLARIFIER - case (12 x 8 oz)
    Manufacturer: Polyscience Corp
    polyclean CLARIFIER -CS/12 x 8 oz CS /12 (12 per CS )
    Learn More
    $435.00
  14. Alum Optional Shelf for Bench Top Incubator
    Manufacturer: Bellco Glass Inc
    Dimensions: 14 1/2"W x 29 3/16"L. Open Stand for SI9/SI9R,24 ". Slotted Holes; 4 rows of 28, hole size; 3/8" x 1 3/4". Supply with 4 clips ( A512-42) (1 per EA )
    Learn More
    $160.32
  15. ISS-7200R Incubated Shaker, 120V, 60Hz
    Manufacturer: Jeio Tech
    ISS-7200R Incubated Shaker Category=Incubators 120V, 60Hz Plug=NEMA 5-15P HS Code=8419.89.9090 (1 per EA)
    Learn More
    $16,640.00
  16. Ice Free Cool Box for 30 Tubes, 2mL, with Freezing Block, 1/pk, 1/cs
    Manufacturer: Nest Scientific
    Ice Free Cool Box for 30 Tubes, 2mL, with Freezing Block, 1/pk, 1/cs (1 per EA )
    Learn More
    was $773.00 Special Price $689.90
  17. Immersion Probe Cooler, IP-100, 0.625” Ø Flexible Cold Finger Probe, (-100° to -60°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)
    Learn More
    was $9,610.50 Special Price $9,014.66
  18. WATER BATH, 23 Liter, Digital, 115V
    Manufacturer: Sheldon Manufacturing
    Weight:42 lbs Agency Approval:TUV-CUE Temperature Control:Microprocessor Temperature Uniformity:+/-0.2°C (at 37°C) Temperature Range:Ambient +5°C to 80°C Exterior Dimensions WxDxH in. (cm):15 x 25.3 x 9 (38.1 x 64.2 x 22.9) Interior Dimensions WxDxH in. (cm):11.5 x 19.5 x 6.2 (29.2 x 49.5 x 15.8) Capacity:23 L Maximum Energy Consumption (W):600/840 All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time. (1 per EA)
    Learn More
    $1,274.00
  19. Water Chiller H50-500 115V, EA /1
    Manufacturer: LabTech
    Water Chiller H50-500 115V (1 per EA)
    Learn More
    $2,227.68
  20. Histology Freeze Plate (Fixed at -34.4°C), 120V, 60Hz
    Manufacturer: Polyscience Corp
    Key Features: Ultra-cold surface freezes samples quickly, reduces overall processing time by 40% or more 136 in² (877 cm²) freezing surface accommodates multiple specimens simultaneously (1 per EA)
    Learn More
    was $3,150.00 Special Price $2,954.70
  21. Bypass Kit, replacement, Buna N tubing, 1/2” ID x 6” with spring and insulation
    Manufacturer: Polyscience Corp
    Bypass Kit, replacement, Buna N tubing, 1/2in. ID x 6in. with spring and insulation EA /1 (1 per EA)
    Learn More
    $19.25
  22. Water Bath, 2L Digital, (Ambient +5° to 99°C), 240V, 50/60Hz
    Manufacturer: Polyscience Corp
    Key Features: Displays actual and set point temperature simultaneously Programmable pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration off-set feature Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads All 220-240V units are compatible with both 50Hz and 60Hz electrical systems (1 per EA )
    Learn More
    was $657.00 Special Price $616.27
  23. Immersion Probe Cooler, IP-100, 0.7” Ø Rigid Cold Finger Probe, (-100° to -60°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)
    Learn More
    was $9,610.50 Special Price $9,014.66
  24. 5 micron Sediment Filter, PK/2
    Manufacturer: Polyscience Corp
    5 micron Sediment Filter, PK/2 (2 per PK )
    Learn More
    was $35.00 Special Price $33.72
Filters
Set Descending Direction

586 items

Page
per page
View as List Grid