Lab Procurement Services offers a comprehensive range of high-quality, affordable constant temperature equipment to handle a variety of applications.  Please see individual categories for

As well as the Parts and Accessories sections.  Our experts are here to help with product selection and quotations - give us a call, or set up a meeting!

Before ordering, check the temperature range against your method: the digital water baths here cover ambient +5° to 99°C, while refrigerated circulators reach -30°C at the low end and up to 170°C at the high end. Compare bath volume, and for chillers the cooling capacity (in kW or HP) and pump type, since the DuraChill CA chillers are listed with either a turbine or a positive displacement pump. Confirm voltage and frequency (120V 60Hz, 208-240V or 230V). Plan for the bath fluid too, such as polycool glycol mixes for below-ambient work and algae inhibitor for water baths, plus the fittings, lids and bypass kits your setup needs.

Constant Temperature: common questions

What is constant temperature equipment?

Constant temperature equipment holds samples, vessels or connected instruments at a set temperature. It includes water and bead baths, heated and refrigerated circulators, recirculating chillers, immersion coolers, general-purpose, CO2 and shaking incubators, humidity test chambers and plant growth chambers. The right choice depends on temperature range, stability, capacity, and whether you need to heat, cool or both.

What is the difference between a circulator and a chiller?

A circulator has a bath with a heater, often refrigeration, and a pump that can control the bath itself or circulate fluid through external equipment. A recirculating chiller is mainly built to remove heat, supplying cooled fluid to equipment such as rotary evaporators, condensers or lasers. Chillers typically focus on cooling capacity, while circulators offer wider temperature ranges and their own working bath.

What fluid should I use in a lab bath or circulator?

Distilled or deionized water is commonly used for moderate temperatures, often with an algae inhibitor to keep the bath clean. For temperatures near or below freezing, a water and glycol mix is typical, and specialty fluids or oils are used at higher temperatures. Use a fluid rated for your full operating range and approved by the equipment manufacturer.

Can I get a quote on a chiller or incubator?

Yes. Volume and quote pricing is available through the Contact Us page, and approved business accounts can pay by purchase order. Larger equipment often ships directly from the manufacturer, so lead times vary by item. Include the model, voltage and quantity in your request so the quote matches what you need.

Constant Temperature

Filters
Set Descending Direction

30 items

Page
per page
View as List Grid
  1. 10L Vessel Stand Bioreactor
    Manufacturer: Bellco Glass Inc
    10L Bioreactor Stand (1 per EA )
    Learn More
    $2,086.23
  2. Bellco Glass, Inc -Mini Roll-In Incubator,230V
    Manufacturer: Bellco Glass Inc
    Bellco Mini Roll-In Incubators have 21 cubic feet of volume and are designed for use with Bellco's Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets. (1 per EA )
    Learn More
    $9,266.58
  3. Brushless Orbital Shaker 230V
    Manufacturer: Bellco Glass Inc
    The Bellco Orbital Shaker is a compact, heavy-duty variable speed shaker. It is used for the agitation of electrophoretic gels and filter assay media for staining, destaining and assay development. The Shaker accommodates a variety of vessels. It is continuously adjustable from 30 to 350 RPM. This Bellco design incorporates an orbital platform that accepts a variety of optional trays. A variety of tray models are available, including three equipped with flask clamps for common sizes of flasks. Peg and Grommet style trays make changing convenient. (1 per EA )
    Learn More
    $2,400.94
  4. Roll-in Shelf Cart 2 shelf
    Manufacturer: Bellco Glass Inc
    The Bellco Roll-in Shelf cart is a mobile unit designed for transporting glass-ware & equipment from one location to another or as an easy method of loading the Bellco Roll-in Incubator. The cart is mounted on four (4) heavy duty bearing swivel castors able to support approx. 750lbs. The loaded cart can easily be rolled in the Bellco Roll-in Incubator via the castor guides located on the incubator interior floor. The cart comes with two (2) vented shelves which are adjustable & may be mounted at 6 1/8" intervals along the corner support posts. Additional shelves may be ordered under part number D504-1. The cart is capable of supporting two (2) 36 liter & two (2) 15 liter spinner flasks complete with OHD drives or a variety of smaller flasks & other assorted laboratory equipment. The cart is constructed of 1/8" aluminum & is finished with an Olivetti white textured paint. The unit is shipped un-assembled in a flat carton & is easily assembled with ordinary had tools. (not supplied). HEIGHT: 55 1/2" (141cm) WIDTH: 32 3/34" (83.2cm) (1 per EA )
    Learn More
    $1,741.09
  5. Single Window Roll-In Incubator, 115V
    Manufacturer: Bellco Glass Inc
    Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )
    Learn More
    $10,620.34
  6. Alum Optional Shelf for Bench Top Incubator
    Manufacturer: Bellco Glass Inc
    Dimensions: 14 1/2"W x 29 3/16"L. Open Stand for SI9/SI9R,24 ". Slotted Holes; 4 rows of 28, hole size; 3/8" x 1 3/4". Supply with 4 clips ( A512-42) (1 per EA )
    Learn More
    $160.32
  7. Single Window Roll-in Incubator, 230V
    Manufacturer: Bellco Glass Inc
    Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )
    Learn More
    $11,905.81
  8. Single Window Mini-Refrigerated Incubator, 115V
    Manufacturer: Bellco Glass Inc
    The Bellco Mini Refrigerated Roll-In Incubator has 21 cubic feet of volume and is designed for use with Bellco’s Cell Production Roller Apparatus (CPRA) up to 2 decks high. The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )
    Learn More
    $15,844.00
  9. Refrigerated Single Window Incubator., 115V
    Manufacturer: Bellco Glass Inc
    The Bellco Refrigerated Roll-In Incubators have 40 cubic feet of volume. Refrigerated roll-in incubator ideal for insect cell incubations performed at 27 degrees c. Microprocessor PID temperature controller accommodates up to 9-deck fixed frame or base +7 modular Bellco cell production roller apparatus. Accessory power outlets (4) in chamber provided for supplemental equipment. Forced air circulation facilitates even temperature distribution. Control panel w/power switch, convenience outlet, safety thermostat refrigeration switch, temperature controller. "flush to floor' design allows easy loading of Bellco roller apparatus. Btu/hr: 5,120 max. (1 per EA )
    Learn More
    $17,721.72
  10. Single Window Mini-Refrigerated Incubator, 230V
    Manufacturer: Bellco Glass Inc
    The Bellco Mini Refrigerated Roll-In Incubator has 21 cubic feet of volume and is designed for use with Bellco’s Cell Production Roller Apparatus (CPRA) up to 2 decks high. The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )
    Learn More
    $16,748.97
  11. Roller Bottle, 110x570mm With GL45 Blue PP Cap
    Manufacturer: Bellco Glass Inc
    Borosilicate glass, type 1, class a 45 mm polypropylene screw cap provides secure seal Polypropylene pouring ring allows drip free pouring and protects rim Replacement cap: 5637-00045; pouring ring: 5637-10045 Area (cm2): 1585, OD x OAL: 110 x 570mm (1 per EA )
    Learn More
    $234.10
  12. Flask Carrier, 36 L
    Manufacturer: Bellco Glass Inc
    Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6L or 9L vessels or carboys. Material: stainless steel Dimensions: 17x13" Size: 36l (1 per EA )
    Learn More
    $322.54
  13. Flask Carrier, 15 L
    Manufacturer: Bellco Glass Inc
    Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6L or 9L vessels or carboys. Material: stainless steel Dimensions: 2x11" Size: 15l (1 per EA )
    Learn More
    $272.60
  14. Mini-Roll-in Incubator, 115V
    Manufacturer: Bellco Glass Inc
    Bellco Mini Roll-In Incubators have 21 cubic feet of volume and are designed for use with Bellco's Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets. (1 per EA )
    Learn More
    $9,016.20
  15. Stand w/6 Bolts,3L Bioreactor
    Manufacturer: Bellco Glass Inc
    Bioreactor Stand w/ 6 Bolts for 3L bioreactor (1 per EA )
    Learn More
    $1,986.13
  16. BTBII Recip Tray,10x10in
    Manufacturer: Bellco Glass Inc
    This tray only fits the back-to-basics II reciprocating shaker units. Includes rubber mat with peg and grommet design. Customer must use this tray or stainless steel tray 7677-32010 for reciprocating shaker units. Size: 10"x10" (1 per EA )
    Learn More
    $82.83
  17. BTBII Recp. Stainless Steel Tray,10x10in
    Manufacturer: Bellco Glass Inc
    This tray only fits the back-to-basics II reciprocating shaker units. Includes rubber mat with peg and grommet design. Customer must use this tray or 7677-31010 for reciprocating shaker units. Size: 10"x10" (1 per EA )
    Learn More
    $61.94
  18. Optional Stacking Tray For BTBII Rocker
    Manufacturer: Bellco Glass Inc
    Stacking Tray for Back-To-Basics II Rocker (1 per EA )
    Learn More
    $86.94
  19. Bench Top SOLID DOOR Incubator, 115V Analog
    Manufacturer: Bellco Glass Inc
    The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having to open the door limiting possible contamination problems and temperature fluctuations. The convenient interior accessory outlet allows the use of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakers and Magnetic Stirrers. Optional stainless steel shelf creates additional space for storing cell culture plates and flasks. (1 per EA )
    Learn More
    $4,490.79
  20. Large Flange Vessel Stand,5L For Omni Vessels
    Manufacturer: Bellco Glass Inc
    Stainless steel stand for round bottom large flange omni vessels. (1 per EA )
    Learn More
    $976.54
  21. Large Flange Vessel Stand,15L For Omni Vessels
    Manufacturer: Bellco Glass Inc
    Stainless steel stand for round bottom large flange omni vessels. Material: 316l stainless steel Dimensions: 19.5x14" Heavy duty stainless w/locking clamp Silicone cushion protects glass vessel Four legs provides stability (1 per EA )
    Learn More
    $1,714.76
  22. Flask Carrier,6 L
    Manufacturer: Bellco Glass Inc
    Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6L or 9L vessels or carboys. Material: stainless steel Dimensions: 9×8" Size: 6l (1 per EA )
    Learn More
    $211.48
  23. Flask Carrier, 8 L
    Manufacturer: Bellco Glass Inc
    Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6l or 9l vessels or carboys. Material: stainless steel Dimensions: 10 3/14" x 9" Size: 8l (1 per EA )
    Learn More
    $225.54
  24. Bench Top SOLID DOOR Incubator, 100V Analog
    Manufacturer: Bellco Glass Inc
    The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having to open the door limiting possible contamination problems and temperature fluctuations. The convenient interior accessory outlet allows the use of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakers and Magnetic Stirrers. Optional stainless steel shelf creates additional space for storing cell culture plates and flasks. (1 per EA )
    Learn More
    $4,800.57
Filters
Set Descending Direction

30 items

Page
per page
View as List Grid