Constant Temperature

Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)

Weight:42 lbs Agency Approval:TUV-CUE Temperature Control:Microprocessor Temperature Uniformity:+/-0.2°C (at 37°C) Temperature Range:Ambient +5°C to 80°C Exterior Dimensions WxDxH in. (cm):15 x 25.3 x 9 (38.1 x 64.2 x 22.9) Interior Dimensions WxDxH in. (cm):11.5 x 19.5 x 6.2 (29.2 x 49.5 x 15.8) Capacity:23 L Maximum Energy Consumption (W):600/840 All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time. (1 per EA)

Water Chiller H50-500 115V (1 per EA)

Key Features: Ultra-cold surface freezes samples quickly, reduces overall processing time by 40% or more 136 in² (877 cm²) freezing surface accommodates multiple specimens simultaneously (1 per EA)

Bypass Kit, replacement, Buna N tubing, 1/2in. ID x 6in. with spring and insulation EA /1 (1 per EA)

Key Features: Displays actual and set point temperature simultaneously Programmable pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration off-set feature Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads All 220-240V units are compatible with both 50Hz and 60Hz electrical systems (1 per EA )

Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)

5 micron Sediment Filter, PK/2 (2 per PK )

Fitting, 1/2in., 13 mm barb x 3/8in., 9.5 mm barb, glass filled nylon, for MX Controllers EA /1 (1 per EA)

IST-3075 Benchtop Incubating Shaker,, 17.3 x 30.9 x 20.1, L, cu ft, 2015 New Product, replaces SI-300, Category=Incubator, 120V, 60Hz (1 per EA)

Key Features: Large, universal icon and English display Swivel 180™ Rotating Controller On-board connectivity: RS-232 serial output On-screen prompts Automatic performance optimization Single-point calibration capabilit (1 per EA)

Specially designed for optimal temperature control as well as minimal sample contamination caused by external air intrusion. (1 per EA)

Weight:19 lbs Agency Approval:TUV-CUE Temperature Control:Microprocessor Temperature Uniformity:+/-0.2°C (at 37°C) Temperature Range:Ambient +5°C to 80°C Exterior Dimensions WxDxH in. (cm):15.3 x 12 x 9 (38.8 x 30.5 x 22.9) - Cover Adds 3.5 in. to Height Interior Dimensions WxDxH in. (cm):11.7 x 6 x 6 (29.8 x 15.2 x 15.2) Capacity:7 L Maximum Energy Consumption (W):360/480 All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time. (1 per EA)

ILP-12 Personal Low Temp incubator 120V, 60Hz, 108lbs, 17 x 26.2 x 24.4, 48L, 1.7cu ft, Category=Incubator, 120V, 60Hz (1 per EA)

Key Features: Displays actual and set point temperature simultaneously Programmable pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration off-set feature Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads All 220-240V units are compatible with both 50Hz and 60Hz electrical systems (1 per EA )

Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)

PolyScience Circulating Baths are as precise as they are reliable. Every product comes equipped with innovative proprietary features, from the quiet, energy-efficient heat removal of our WhisperCool™ Environmental Control System to the fast-acting temperature control of Cool Command™ Technology. Our Circulating Baths are easy to use, offering interface controller flexibility, clear navigational buttons and menu prompts, ergonomic design for easy repositioning and simple fluid connections. These hard-working machines were designed to make your life easier and more productive. (1 per EA)

Weight:250 lbs Overtemperature Alarm:Yes Access Port:1.45 inches Shelving:3 Supplied (8 Maximum) Relative Humidity Range:up to 95% Jacket Type:Air CO2 Recovery Rate:< 5 minutes CO2 Sensor:IR CO2 Range:0-20% Agency Approval:TUV Temperature Uniformity:+/-0.25°C at 37°C Temperature Range:Ambient +8°C to 60°C Exterior Dimensions WxDxH in. (cm):27.3 x 28.5 x 37.8 (69.3 x 72.4 x 96.0) Interior Dimensions WxDxH in. (cm):20.5 x 19.7 x 21.5 (52.1 x 50.0 x 54.6) Capacity:5 Cu.Ft. (142 L) Maximum Energy Consumption (W):720 Split Inner Glass Chamber Door:Optional Data Logging Capabilities:Yes All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time. (1 per EA)

PolyScience Circulating Baths are as precise as they are reliable. Every product comes equipped with innovative proprietary features, from the quiet, energy-efficient heat removal of our WhisperCool™ Environmental Control System to the fast-acting temperature control of Cool Command™ Technology. Our Circulating Baths are easy to use, offering interface controller flexibility, clear navigational buttons and menu prompts, ergonomic design for easy repositioning and simple fluid connections. These hard-working machines were designed to make your life easier and more productive. (1 per EA)

The Bellco Mini Refrigerated Roll-In Incubator has 21 cubic feet of volume and is designed for use with Bellco’s Cell Production Roller Apparatus (CPRA) up to 2 decks high. The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )

Climacell EVO 707 (25 ft3) Photostability, Stability Chamber (1 per EA )

The BeadBath Duo series are the first laboratory baths designed for precision temperature control when used with water, or with (the increasingly popular) Lab Armor® thermal beads. Unlike any other laboratory bath, they feature a “MODE” button that can be (1 per EA)

Solid Plug for calibration bath lid, Viton EA /1 (1 per EA)