Lab Procurement Services offers a comprehensive range of high-quality, affordable constant temperature equipment to handle a variety of applications.  Please see individual categories for

As well as the Parts and Accessories sections.  Our experts are here to help with product selection and quotations - give us a call, or set up a meeting!

Before ordering, check the temperature range against your method: the digital water baths here cover ambient +5° to 99°C, while refrigerated circulators reach -30°C at the low end and up to 170°C at the high end. Compare bath volume, and for chillers the cooling capacity (in kW or HP) and pump type, since the DuraChill CA chillers are listed with either a turbine or a positive displacement pump. Confirm voltage and frequency (120V 60Hz, 208-240V or 230V). Plan for the bath fluid too, such as polycool glycol mixes for below-ambient work and algae inhibitor for water baths, plus the fittings, lids and bypass kits your setup needs.

Constant Temperature: common questions

What is constant temperature equipment?

Constant temperature equipment holds samples, vessels or connected instruments at a set temperature. It includes water and bead baths, heated and refrigerated circulators, recirculating chillers, immersion coolers, general-purpose, CO2 and shaking incubators, humidity test chambers and plant growth chambers. The right choice depends on temperature range, stability, capacity, and whether you need to heat, cool or both.

What is the difference between a circulator and a chiller?

A circulator has a bath with a heater, often refrigeration, and a pump that can control the bath itself or circulate fluid through external equipment. A recirculating chiller is mainly built to remove heat, supplying cooled fluid to equipment such as rotary evaporators, condensers or lasers. Chillers typically focus on cooling capacity, while circulators offer wider temperature ranges and their own working bath.

What fluid should I use in a lab bath or circulator?

Distilled or deionized water is commonly used for moderate temperatures, often with an algae inhibitor to keep the bath clean. For temperatures near or below freezing, a water and glycol mix is typical, and specialty fluids or oils are used at higher temperatures. Use a fluid rated for your full operating range and approved by the equipment manufacturer.

Can I get a quote on a chiller or incubator?

Yes. Volume and quote pricing is available through the Contact Us page, and approved business accounts can pay by purchase order. Larger equipment often ships directly from the manufacturer, so lead times vary by item. Include the model, voltage and quantity in your request so the quote matches what you need.

Constant Temperature

Filters
Set Descending Direction

586 items

Page
per page
View as List Grid
  1. Fitting, 1/2” (13 mm) barb x 3/8” (9.5 mm) barb, glass filled nylon (for MX Controllers)
    Manufacturer: Polyscience Corp
    Fitting, 1/2in., 13 mm barb x 3/8in., 9.5 mm barb, glass filled nylon, for MX Controllers EA /1 (1 per EA)
    Learn More
    $5.51
  2. IST-3075 Incubated Shaker(53L), 120V, 60Hz
    Manufacturer: Jeio Tech
    IST-3075 Benchtop Incubating Shaker,, 17.3 x 30.9 x 20.1, L, cu ft, 2015 New Product, replaces SI-300, Category=Incubator, 120V, 60Hz (1 per EA)
    Learn More
    $7,009.00
  3. IL3-15A Low Temperature Incubator including RS-232 interface and software, 120V, 60Hz
    Manufacturer: Jeio Tech
    Specially designed for optimal temperature control as well as minimal sample contamination caused by external air intrusion. (1 per EA)
    Learn More
    $7,201.00
  4. WATER BATH, 7 Liter, Digital, 115V
    SKU: SWB7-EA
    Manufacturer: Sheldon Manufacturing
    Weight:19 lbs Agency Approval:TUV-CUE Temperature Control:Microprocessor Temperature Uniformity:+/-0.2°C (at 37°C) Temperature Range:Ambient +5°C to 80°C Exterior Dimensions WxDxH in. (cm):15.3 x 12 x 9 (38.8 x 30.5 x 22.9) - Cover Adds 3.5 in. to Height Interior Dimensions WxDxH in. (cm):11.7 x 6 x 6 (29.8 x 15.2 x 15.2) Capacity:7 L Maximum Energy Consumption (W):360/480 All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time. (1 per EA)
    Learn More
    $898.00
  5. ILP-12 Personal Low Temperature incubator(48L), 120V, 60Hz
    Manufacturer: Jeio Tech
    ILP-12 Personal Low Temp incubator 120V, 60Hz, 108lbs, 17 x 26.2 x 24.4, 48L, 1.7cu ft, Category=Incubator, 120V, 60Hz (1 per EA)
    Learn More
    $6,377.00
  6. Water Bath, 5L Digital, (Ambient +5° to 99°C), 240V, 50/60Hz
    Manufacturer: Polyscience Corp
    Key Features: Displays actual and set point temperature simultaneously Programmable pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration off-set feature Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads All 220-240V units are compatible with both 50Hz and 60Hz electrical systems (1 per EA )
    Learn More
    was $792.50 Special Price $743.37
  7. Single Window Roll-in Incubator, 230V
    Manufacturer: Bellco Glass Inc
    Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )
    Learn More
    $11,905.81
  8. Immersion Probe Cooler, IP-100, 3” Ø Rigid Coil Probe, (-100° to -60°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)
    Learn More
    was $9,610.50 Special Price $9,014.66
  9. CO2 INCUBATOR, AIR JACKET (Direct Heat), 5 CU FT, IR, HEPA, 115V
    Manufacturer: Sheldon Manufacturing
    Weight:250 lbs Overtemperature Alarm:Yes Access Port:1.45 inches Shelving:3 Supplied (8 Maximum) Relative Humidity Range:up to 95% Jacket Type:Air CO2 Recovery Rate:< 5 minutes CO2 Sensor:IR CO2 Range:0-20% Agency Approval:TUV Temperature Uniformity:+/-0.25°C at 37°C Temperature Range:Ambient +8°C to 60°C Exterior Dimensions WxDxH in. (cm):27.3 x 28.5 x 37.8 (69.3 x 72.4 x 96.0) Interior Dimensions WxDxH in. (cm):20.5 x 19.7 x 21.5 (52.1 x 50.0 x 54.6) Capacity:5 Cu.Ft. (142 L) Maximum Energy Consumption (W):720 Split Inner Glass Chamber Door:Optional Data Logging Capabilities:Yes All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time. (1 per EA)
    Learn More
    $7,914.00
  10. Single Window Mini-Refrigerated Incubator, 115V
    Manufacturer: Bellco Glass Inc
    The Bellco Mini Refrigerated Roll-In Incubator has 21 cubic feet of volume and is designed for use with Bellco’s Cell Production Roller Apparatus (CPRA) up to 2 decks high. The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )
    Learn More
    $15,844.00
  11. Climacell EVO 707 (25 ft3) Photostability, Stability Chamber
    Manufacturer: BMT USA
    Climacell EVO 707 (25 ft3) Photostability, Stability Chamber (1 per EA )
    Learn More
    was $48,523.10 Special Price $46,628.76
  12. BeadBath Duo, 10L bath, 115V
    Manufacturer: Benchmark Scientific
    The BeadBath Duo series are the first laboratory baths designed for precision temperature control when used with water, or with (the increasingly popular) Lab Armor® thermal beads. Unlike any other laboratory bath, they feature a “MODE” button that can be (1 per EA)
    Learn More
    was $1,474.99 Special Price $1,316.43
  13. Solid Plug for calibration bath lid, Viton®
    Manufacturer: Polyscience Corp
    Solid Plug for calibration bath lid, Viton EA /1 (1 per EA)
    Learn More
    $15.00
  14. CO2 INCUBATOR, AIR JACKET (Direct Heat), 10 CU FT, DUAL Chamber (5 cuft per chamber), IR, HEPA, 115V
    Manufacturer: Sheldon Manufacturing
    Weight:250 lbs Overtemperature Alarm:Yes Access Port:1.45 inches Shelving:3 Supplied (8 Maximum) Relative Humidity Range:up to 95% Jacket Type:Air CO2 Recovery Rate:< 5 minutes CO2 Sensor:IR CO2 Range:0-20% Agency Approval:TUV Temperature Uniformity:+/-0.25°C at 37°C Temperature Range:Ambient +8°C to 60°C Exterior Dimensions WxDxH in. (cm):27.3 x 28.5 x 37.8 (69.3 x 72.4 x 96.0) Interior Dimensions WxDxH in. (cm):20.5 x 19.7 x 21.5 (52.1 x 50.0 x 54.6) Capacity:5 Cu.Ft. (142 L) Maximum Energy Consumption (W):720 Split Inner Glass Chamber Door:Optional Data Logging Capabilities:Yes (1 per EA)
    Learn More
    $15,822.00
  15. ISS-3075 Incubated Shaker(80L), 120V, 60Hz
    Manufacturer: Jeio Tech
    ISS-3075 Stackable Incubating Shaker with Touch screen LCD Controller,, 22.8 x 32.1 x 33.6, 80L, 2.8cu ft, 2015 New Product, replaces SIF-5000, Category=Incubator, 120V, 60Hz (1 per EA)
    Learn More
    $10,474.00
  16. Additional shelf for 180 liter incubators, 1 each
    Manufacturer: Benchmark Scientific
    Additional shelf for 180 liter incubators, 1 each (1 per EA)
    Learn More
    $427.26
  17. Thermal Micro Beads XL, Glass, 4 to 4.5 mm, 1 L
    Manufacturer: Diversified Biotech
    Thermal Micro Beads XL, Glass, 4 to 4.5 mm, 1 L (5 per CS )
    Learn More
    was $325.00 Special Price $324.19
  18. Overflow Measuring Flask 244 ML, Ea/1
    Manufacturer: Lovibond Tintometer Group
    Lovibond® Overflow Measuring Flask, 244 ml (1 per EA)
    Learn More
    $60.70
  19. Freezing Box Accessories, 48 Tubes, 1.5 Tube Holder Block, 1/pk, 1/cs
    Manufacturer: Nest Scientific
    Freezing Box Accessories, 48 Tubes, 1.5 Tube Holder Block, 1/pk, 1/cs (1 per EA )
    Learn More
    was $278.34 Special Price $248.42
  20. Refrigerated Single Window Incubator., 115V
    Manufacturer: Bellco Glass Inc
    The Bellco Refrigerated Roll-In Incubators have 40 cubic feet of volume. Refrigerated roll-in incubator ideal for insect cell incubations performed at 27 degrees c. Microprocessor PID temperature controller accommodates up to 9-deck fixed frame or base +7 modular Bellco cell production roller apparatus. Accessory power outlets (4) in chamber provided for supplemental equipment. Forced air circulation facilitates even temperature distribution. Control panel w/power switch, convenience outlet, safety thermostat refrigeration switch, temperature controller. "flush to floor' design allows easy loading of Bellco roller apparatus. Btu/hr: 5,120 max. (1 per EA )
    Learn More
    $17,721.72
  21. Air Filter for 6000 Series (1/4 to 1HP), Model 3370, IP-100, IP-80, Cryoprecipitate Bath
    Manufacturer: Polyscience Corp
    Air Filter for Cryoprecipitate Bath EA /1 (1 per EA)
    Learn More
    $25.75
  22. Ice Free Cool Box for 12 Tubes, 1mL/2mL Tubes, Hexagonal Shape, 1/pk, 1/cs
    Manufacturer: Nest Scientific
    Ice Free Cool Box for 12 Tubes, 1mL/2mL Tubes, Hexagonal Shape, 1/pk, 1/cs (1 per EA )
    Learn More
    was $298.06 Special Price $266.02
  23. Incucell 707 ECO
    Manufacturer: BMT USA
    Incucell natural gravity convection microbiological incubators provide noiseless operation and gentle airflow along with exceptional temperature uniformity. The lack of a fan significantly reduces particle movement inside the chamber, making incucell incubators ideal for the safe treatment of microbiological cultures. (1 per EA )
    Learn More
    $13,649.99
  24. myBath™ CR Circulating Water Bath, 10L, 230V
    Manufacturer: Benchmark Scientific
    myBath™ CR Circulating Water Bath, 10L, 230V (1 per EA)
    Learn More
    was $1,289.45 Special Price $1,150.83
Filters
Set Descending Direction

586 items

Page
per page
View as List Grid