Equipment

Value Series Pocket Conductivity Tester Kit (1 per EA )

Key Features: Displays actual and set point temperature simultaneously Programmable pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration off-set feature Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads All 220-240V units are compatible with both 50Hz and 60Hz electrical systems (1 per EA )

The Premier Flammable Storage Freezers NFPA and OSHA guidelines 45 and 70 for the refrigerated storage of flammable (volatile) materials in general laboratory work areas. There are no electrical components located in the interior of the unit and the compressor’s electrical components have been sealed in a vapor-proof enclosure for additional safety. These units are NOT designed for use in environments where volatile/explosive conditions could potentially exist. Freezer models feature a microprocessor temperature controller and display, allow for precise temperature control, verification and recovery versus mechanical style thermostats. Critical samples and supplies are security backed with an extensive package of audible and visual alarms For manual defrost freezers, periodic manual defrosting is required. Freestanding models require 4" of clearance around back and sides of unit for proper ventilation. Improper installation will void the warranty and will lead to temperature maintenance issue, overheating and possible failure. Environmentally friendly, natural hydrocarbon (HC) refrigerants (not containing hydrofluorocarbons) vastly reduce global-warming potential (GWP) while meeting new EPA/SNAP mandates and UL, ASHRAE compliance guidelines. (1 per EA )

The Natural gravity convection Incucell incubator provide soft air flow which will not distrub the media. As well the Incucell has quiet operation. The Incucell double wall chamber design provides easy and higher levels of cleaning and sterilization standards. Volumes: 22, 55, 111, 222, 404, 707 litres Working temperature: 5 degC above ambient temperature up to 100 degC Interior: 400 x 370 x 350 mm 15.7 x 14.6 x 13.7" Exterior: 620 x 640 x 680 mm 24.4 x 25.1 x 26.7" -Microprocessor control Fuzzy Logic -3-conductors PT-100 control sensor -Integrated RS 232 for Warmcomm or print -3 inch transreflective LCD COG display -Keyboard block of unauthorized access -Integrated USB Device for Warmcomm -Electronical security device type 2 -Galvanized sheet metal painted exterior -Inner walls from stainless steel -Exhaust duct -Click out inner walls -Up to 2 segments, up to 99 cycles -2 chrome plated trays included -9 programs -Acoustic and visual alarm -Real time feature (1 per EA )

The BOF Forced-air Convection Drying Oven series distributes heat evenly inside the chamber with an integrated fan. This is ideal for drying protocols with very tight temperature requirements. The 4.3-inch touchscreen controller provides fast, accurate, and uniform heat displacement. Users can preset 8 periods and 8 steps for a total of 64 programs. Temperature, time and fan speed can be set and programmed at the same time. The doors are engineered with airtight sealing and inner chambers are designed with corrosion resistant stainless steel. Safety alarms are installed for – overtemperature, over current protection, and temperature deviation. These ovens provide excellent temperature stability and reproducibility for all your desired application needs ensuring maximum efficiency, safety, and ease of use. (1 per EA )

10L Bioreactor Stand (1 per EA )

Disposable Static Mixers, P Series, Disposable Polyacetal Mixing Elements Only, 12 Element, Nominal Size 0.375, Mixer OD 0.365, Length 4.64 (1 per EA )

PPT series mixers are an economical solution for in-line mixing. Ideal for mixing applications involving short-life fluids such as adhesives, epoxies, or coatings, PPT series mixers feature helical-style mixing elements which allow for pressure drop efficient mixing of low, medium, and high viscosity fluids across all flow regimes. Chemically resistant polyacetal elements and polypropylene tubing resist many chemical solutions. With multiple element configurations available in each size, there is a PPT series mixer for nearly all small-scale disposable processes. Typical Applications Low, Medium and High viscosity blending Glue / paint / epoxy Colorants and dyes Static mixers are versatile mixing devices that can be used in a wide range of industries and applications beyond those listed above. For questions regarding a disposable mixer to suit your specific application, feel free to Contact Us. Features Housing: Polypropylene Tubing Elements: Helical Style Polyacetal End Connections: Plain End and Brass Male NPT PPT Series mixers are available in both plain end and brass NPT threaded end configurations. Adapt plain end mixers to your process using standard, commercially-available tube compression fittings (not included). (1 per EA)

Lovibond® Sample Cells / Turbidity Vials with Cap for TB 210 IR & TB 300 IR (pack of 12) 54 mm height x 24 mm diameter (1 per EA )

Thread adapters, 45/38 mm, each (1 per EA)

Pre-loaded, media filled tanks provide additional capacity and higher flow rates compared to cartridge based systems. Tanks include head, riser, and screen and are filled with premium ResinTech resins or carbon. (1 per EA )

Lovibond® AF306/P Pair of Nessler Tubes with Anti-Meniscus Plungers, Lenght 150 mm; Graduated At 113 mm 2 x Nessler Tubes with anti meniscus plungers, for Nessleriser System 2150 Path Length 113 mm; Capacity 50 ml (1 per EA)

The 100mL polypropylene titration cup is designed for seamless compatibility with Mettler Toledo titrators, offering utmost accuracy in titration experiments. Featuring dual-sided graduations in 20mL increments from 20mL to 100mL, these cups ensure precise measurement and easy readability regardless of orientation. A frosted writing area dds convenience for labeling, while the transparent material provides excellent clarity for visual assessments. These cups combine functionality with the highest standards of quality, making them an essential tool for laboratories prioritizing precision. (580 per CS)

For Labmax Dispensers (3 per PK )

Medical Grade Activated Carbon for removal of solvents and organics such as brighteners, photo resists, cleaners and oils, 2.5" x 20", Blue, CS8 (8 per CS )

4 x PCR (32 x 0.2ml) Strip rotor, each (1 per EA)

2980902, MD 110 Photometer 6 in 1 with Bluetooth, Tablet Reagents Data Transfer The photometer MD 110 has integrated Bluetooth® functionality. The app AquaLX® is the ideal supplement to the Lovibond® photometer. Measurement results are transmitted via t (1 per EA )

Adapters Wilfilter Centrifuge Adapter Microscale Dia. x Height (mm) 14 x 34 Adapter snaps over the end of the reaction and is inverted into a 15 mL polypropylene or glass centrifuge tube. (5 per CS )

Value Series Benchtop pH Meter Kit with TestBench (1 per EA )

PC 3003 VARIO select, 100-120 V, 50-60 Hz (1 per EA)

Quickly and efficiently transfers proteins and nucleic acids from small gels to nylon, nitrocellulose or PVDF membranes, Maximum Gel Size 9 x 10 cm (1 per EA)

Provides the most commonly used tray size and comb options (1 per EA)

Key Features: Large, universal icon and English display Swivel 180™ Rotating Controller On-board connectivity: RS-232 serial output On-screen prompts Automatic performance optimization Single-point calibration capabilit (1 per EA)

Quickly and evenly transfers proteins and nucleic acids from polyacrylamide or agarose gels onto nylon, nitrocellulose, or PVDF membranes Features & Benefits: Uniform and strong electric field—supports efficient and even transfers Color-coded, easy to assemble cassettes—ensures proper orientation during transfer Superior tank design allows the cassettes to apply equal pressure across the stack—prevents gel distortion Optional TE47 heat exchanger—provides excellent buffer temperature control when used with an external cooling water bath Includes: Lower Chamber; Safety Lid with High Voltage Leads; Electrode Panels, 2 pcs; Cassettes, 2 pcs; Foam Sponges, 6 mm thick, 2 pcs; Foam Sponges, 3 mm thick, 4 pcs; Cassette Hook; Blotter Paper (14.5 x 21.5 cm), 25 sheets Specifications: Capacity: Up to four 15 x 21 cm gels (without cooling), Up to two 15 x 21 cm gels (with cooling) Maximum Power Settings 100 V, 2 A, 200 W Unit Dimensions (W x H x D) 8 x 13 x 30.5 cm (1 per EA)