Microplates

1536 Well Plate, white, pureGrade, F-Bottom, Pack Of 50 (50 per PK)

96 Well Plates, transparent, hydroGrade, F-Bottom, Pack 100 (100 per PK)

Temperature range: -80 to +121C Clear polycarbonate cover for easy identification - Solid Polypropylene base (50 per CS )

Nunc Style Shared Wall 1.2mL 96-well Plate, Clear, Round well, U-bottom, Shared wall, Sterile; 5 plates/pack, 10 packs/case CS 50 (50 per CS )

Lids, 96 well Transp Btm, All 384 well plates, Pack Of 50 (1 per EA)

Temperature range: -80 to +121C Clear polycarbonate cover for easy identification - Solid Polypropylene base (50 per CS )

Mat cover for 96 well, deep well plate, 0.5mL, N/S, pk of 50 (50 per PK)

Temperature range: -80 to +121C Clear polycarbonate cover for easy identification - Solid Polypropylene base (50 per CS )

The vial body is made of medical-grade cryogenic polypropylene (PP), which meets USP Class-6 standards, so that the vial is recommended to be used in -196 liquid nitrogen phase. DNase/RNase free, non-endotoxin. Electron beam sterilization, SAL = 10 -6. The product meets the SBS standard and provides an effective safety guarantee and management for biological samplelibraries and other warehouses of various chemicals and biological products stored at low temperatures. (50 per CS )

384 Well Plate, black, pureGrade Sterile, Trans F-Btm,Pack50 (50 per PK)

Corning 96-Well Plate Tissue culture treated for optimal cell attachment. Round bottom. With lid. (100 per CS )

These square-well plates work as plates or reservoirs. Wells hold a full 2.5mL (2.2mL with sealing mat in place). A clear lift-off lid is available for transport or storage (10 per CS )

384 Well Plate, white, cellGrade, Trans F-Bottom, Pack Of 50 (50 per PK)

This 8 mm round well U-bottom plate combines 1.6mL working volume with automation friendly design. Sturdy and warp resistant design with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films. Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF. Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free (50 per CS )

12-well Insert 2in1, PET membrane 1.0 µm (48 per PK)

96 Deep Well Storage Plates can be used for the growth of bacterial cultures or storage of compounds Polypropylene offers a low binding surface to prevent samples from sticking to the side walls during elution, and is chemically inert for combinatorial chemistry applications Round Well with V-Bottom is ideal for vortexing and sample retrieval (25 per CS)

These square-well plates work as plates or reservoirs. Wells hold a full 2.5mL (2.2mL with sealing mat in place). A clear lift-off lid is available for transport or storage. (10 per CS )

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 DNase/RNase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (50 per CS )

96 Deep Well Storage Plates can be used for the growth of bacterial cultures or storage of compounds Square to round transition of V-Bottom maximizes working volume Pyramid Bottom eases sample retrieval and improves mixing by creating a sloshing effect rather than a vortex when agitated Round Bottom with round wells enable use with magnetic beads Polypropylene offers a low binding surface to prevent samples from sticking to the side walls during elution, and is chemically inert for combinatorial chemistry applications (25 per CS)

96-well Polypropylene, 400µL Short drip, UHMW Polyethylene, mean pore size 25µm (25 per CS )

US VI Polypropylene Tubes, HDPE Caps.Self-standing: the vial placed on the lab workbench steadily even without a base.Electron Beam Sterilization, SAL=10-6: safe, fast, environment-friendly, no chemical residues.100,000-level Clean Workshop Production, DNAse-free, RNAse-free, pyrogen-free, endotoxin-free.Temperature Range: Approx.-196C to 121CExcellent sealing performance, no leakage of negative pressure 95Kpa, ensuring safe and effective air transportation.RNase and pyrogen freeElectron beam sterilization, SAL=10-6 (50 per CS )

96 Well Plates,transparent,pureGrade Sterile,V-Btm,Pack 50 (50 per PK)

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 DNase/RNase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (50 per CS )