Microplates

Silicone sealing mats are made of research-grade silicone. They are chemically resistant and contain no adhesives or extractables to contaminate samples. Suitable for sealing storage and micro-plates, silicone mats provide sample protection while minimizing evaporation in a wide range of temperatures in incubation and storage applications. Silicone mats are especially good for sample processing or storage at higher temperatures or for applications involving aggressive solvents. Mats are suitable for high-throughput or other demanding applications involving accessing the sample through the cover multiple times. Each well has a perforation over every well that is cut 80% of the way through (but not all of the way). This allows sample access via pipettor, syringe, or probe. These scored perforations are designed to easily open to minimize coring and will seal themselves, after penetration, ensuring an airtight closure to the well. Made of research-grade silicone Perforated wells for easy sample access Re-sealable perforations Resists coring and tearing Eliminates cross-talk between wells Suitable for high-temperature storage Mats can be reused For use with assay and storage plates Mats can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. (50 per CS )

300ul 96-Round well, U-bottom, Natural; 10 plates/pack, 10 packs/case CS100 (100 per CS )

Injection molded silicone sealing mats with 8.2 x 8.2mm square plugs, are designed for 96-well storage and assay plates. Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. Mats have slightly longer plugs eliminating dead-space, and each plug has a molded in O-ring to aid in the prevention of sample loss in storage, evaporation of VOCs, and reducing the risk of aerosols and pathogens venting during the automation process. They work in a wide range of temperatures for incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents. These seals pare well with automation as-well-as manual laboratory protocols. Often used in high-throughput applications or those involving accessing the sample through the cover multiple times. High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. Well perforations are X shaped, and will seal themselves, after penetration, ensuring an airtight closure. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. Molded in alpha numeric grid for easy reference. (100 per CS )

Developed for large sample storage and analysis, these 4.6mL plates feature raised rims for optimized sealing, thin walls to maximize well volume, and a unique elongated bottom trough – designed to act as a reservoir for samples and sample particulate. This plate is ideal for large volume samples and is often used in combinatorial chemistry, environmental, and food testing. Its ANSI/SLAS 1-2004 compliant footprint ensures that it will fit all standard fixtures, stackers, and heater/cooler blocks. Manufactured from inert medical grade virgin polypropylene resins are ideally suited for stable, long term high-density sample storage at -80C. Certified to be free of RNase, DNase, and Pyrogen contamination. (100 per CS )

450ul 96-well Plate, Clear, Round well, V-bottom, Sterile; 10 plates/pack, 10 packs/case CS 100 (100 per CS )

2.2ul 96-well Plate, Clear, Square Well, V-bottom; 5 plates/pack, 10 packs/case CS 50 (50 per CS )

Deep Well Plates 700ul 96-well, Clear, Round well, Conical V-bottom, 5 plates/pack, 10 packs/case CS10 (50 per CS )

Our 10.0mL 24-well plate is ideal for growing bacterial cultures and for sample purification with magnetic beads utilizing manual and automated systems. The unique square top with round bottom design allows for optimum mixing and enhanced recovery of magnetic beads. Separated round well bottoms allow for the use of post or ring style magnetic plates. Automation compliant footprint and rigid construction allow for use on automation platforms with most robotic grippers. Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films. Made from Virgin Polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free. (50 per CS )

450ul 96-well Plate, Clear, Round well, V-bottom; 10 plates/pack, 10 packs/case CS 100 (100 per CS )

2.2ul 96-well Plate, Clear, Square Well, V-bottom, Sterile; 5 plates/pack, 10 packs/case CS 50 (50 per CS )

Silicone Sealing Mat, 96-well, "-" perforated, Round for Deep Well Block (2mL), Printed Alpha-numerics; 10 Mats/Bag, 5 Bags/Case CS 50 (50 per CS )

Compression molded silicone sealing mats with 7.3mm diameter round plugs, are designed for standard 96-well storage and assay plates. Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. Mats fit tightly into wells preventing evaporation of VOCs, sample loss in storage, cross contamination, and reducing the risk of aerosols and pathogens venting during the automation process. They work in a wide range of temperatures for incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents. These seals pare well with automation as-well-as manual laboratory protocols. Often used in high-throughput applications or those involving accessing the sample through the cover multiple times. High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. Well perforations will seal themselves, after penetration, ensuring an airtight closure. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. (50 per CS )

Silicone Sealing Mat, 384-well, "-" perforated, Square for Deep Well Block, Printed Alpha-numerics; 10 Mats/Bag, 5 Bags/Case CS 50 (50 per CS )

200ul 96-well plt, Nat, rd well, PS, Flat Bot, 10 plts/pk, 10 pks/cs (100 per CS )

Deep Well MicroPlates700ul 96-well, Round well, U-bottom, Glass Coated, Natural, Individually Wrapped, 1 plate/pack, 10 packs/case CS10 (100 per CS )

Nunc Style Shared Wall 1.2mL 96-well Plate, Clear, Round well, U-bottom, Shared wall, Sterile; 5 plates/pack, 10 packs/case CS 50 (50 per CS )

This 8 mm round well U-bottom plate combines 1.6mL working volume with automation friendly design. Sturdy and warp resistant design with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films. Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF. Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free (50 per CS )

This 8 mm round well U-bottom plate combines 1.6mL working volume with automation friendly design. Sturdy and warp resistant design with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films. Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF. Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free (50 per CS )

Deep Well Plates 700ul 96-well, Clear, Round well, Conical V-bottom, 5 plates/pack, 10 packs/case CS10 (50 per CS )

Nunc Style Shared Wall 1.2mL 96-well Plate, Clear, Round well, U-bottom, Shared wall; 5 plates/pack, 10 packs/case CS 50 (50 per CS )

Silicone sealing mats are made of research-grade silicone. They are chemically resistant and contain no adhesives or extractables to contaminate samples. Suitable for sealing rectangular 48-well storage and micro-plates, silicone mats provide sample protection while minimizing evaporation in a wide range of temperatures in incubation and storage applications. Silicone mats are especially good for sample processing or storage at higher temperatures or for applications involving aggressive solvents. Mats are suitable for high-throughput or other demanding applications involving accessing the sample through the cover multiple times. Each well has a perforation over every well that is cut 80% of the way through (but not all of the way). This allows sample access via pipettor, syringe, or probe. These scored perforations are designed to easily open to minimize coring and will seal themselves, after penetration, ensuring an airtight closure to the well. (50 per CS )

This pre-sterilized shared wall 8.5mm round well U-bottom plate combines optimized mixing and storage with automation friendly design. Sturdy and warp resistant, with ultra-flat surfaces and rigid construction Ideal for automation – high throughput screening, sample collection, compound storage, LC/MS, mixing, and combinatorial chemistry applications. Compatible with stackers, grippers, heater/cooler blocks, autosamplers, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Mid-height to maximize storage, utilizing 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. With stacking lugs to help prevent toppling. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Made from Virgin Polypropylene; no mold release agents or regrind RNase, DNase, DNA, and Pyrogen Free Certification (50 per CS )

700ul 96-well plt, rd well, con V-bot, Glass Coated, Nat, Ind Wrap, 1 plt/pk, 10 pks/cs (100 per CS )

This pre-sterilized shared wall 8.5mm round well U-bottom plate combines optimized mixing and storage with automation friendly design. Sturdy and warp resistant, with ultra-flat surfaces and rigid construction Ideal for automation – high throughput screening, sample collection, compound storage, LC/MS, mixing, and combinatorial chemistry applications. Compatible with stackers, grippers, heater/cooler blocks, autosamplers, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Mid-height to maximize storage, utilizing 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. With stacking lugs to help prevent toppling. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Made from Virgin Polypropylene; no mold release agents or regrind RNase, DNase, DNA, and Pyrogen Free Certification (50 per CS )