Microplates

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 DNase/RNase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (50 per CS )

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

12-well Insert 2in1, PC-membrane 8.0 µm, multipack (1 per EA)

384 Well Plate, white, pureGrade, F-Bottom, Pack Of 50 (50 per PK)

384 Well Plate, black, immunoGrade, F-Bottom, Pack Of 50 (50 per PK)

Microtest Plate, 96-Well, Flat Bottom, PS, STERILE, Individually Wrapped, CS50 (50 per CS)

96 square deep well plate (profile concave)-2.2ml, u bottom, dnase & rnase free, without cap,non-sterile, 24 pieces/pack, 96 pieces/case (96 per CS )

Polystyrene is optically clear for easy cell viewing and imaging Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination Plates are labeled with alpha-numeric markings for easy identification of individual wells Lids have a stacking feature for added stability when handling tall stacks of plates Round bottom option maximizes sample retrieval and allows mixing (PN 229190) Plate is printed with lot number and expiration date for easy identification and tracking Sturdy individual blister pack prevents damage when handling or shipping Bulk packaging option (5/sleeve) increases efficiency for high volume users (PN 229197) (100 per CS)

OptiWell™ Deep Well Plate, 96 Round Well, 0.4mL, 14.75mm height, U-bottom, Black Alphanumeric Printing, PP, Sterile, 10 bags of 10 pieces, 100 / CS (100 per PK )

96 Well Cell Culture Plate, white frame with clear PS bottom, Flat bottom, TC, Sterile, 1/PK, 30/cs (30 per CS )

This 8 mm round well U-bottom plate combines 1.6mL working volume with automation friendly design. Sturdy and warp resistant design with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films. Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF. Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free (50 per CS )

96 WELL MICROTEST PLATE ROUND BOTTOM POLYSTYRENE STERILE WITH LID INDIVIDUALLY PACKAGED. (50 per CS )

12-well Insert 2in1, PET-membrane 8.0 µm (1 per EA)

Polystyrene is optically clear for easy cell viewing and imaging Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination Plates are labeled with alpha-numeric markings for easy identification of individual wells Lids have a stacking feature for added stability when handling tall stacks of plates Round bottom option maximizes sample retrieval and allows mixing (PN 229190) Plate is printed with lot number and expiration date for easy identification and tracking Sturdy individual blister pack prevents damage when handling or shipping Bulk packaging option (5/sleeve) increases efficiency for high volume users (PN 229197) (100 per CS)

96 Well Plate Lids with Rings, Pack Of 100 (100 per PK)

1536 Well Plate Lids, Pack Of 50 (50 per PK)

96 Deep Well Storage Plates can be used for the growth of bacterial cultures or storage of compounds Square to round transition of V-Bottom maximizes working volume Pyramid Bottom eases sample retrieval and improves mixing by creating a sloshing effect rather than a vortex when agitated Round Bottom with round wells enable use with magnetic beads Polypropylene offers a low binding surface to prevent samples from sticking to the side walls during elution, and is chemically inert for combinatorial chemistry applications (25 per CS)

6 well pureGrade S, Trans. F-bottom, 10 w/10 lids (10 per PK)

96 Well Plates, transparent, pureGrade, F-bottom,Pack Of 100 (100 per PK)

96 Well Plates, transparent, lipoGrade, U-bottom, Pack 100 (100 per PK)

96 Well Plates, black, pureGrade, F-Bottom, Pack Of 100 (100 per PK)

96 Well Plates, white, pureGrade, Trans F-Btm, Pack Of 100 (100 per PK)

384 Well Plate, white, immunoGrade, F-Bottom, Pack Of 50 (50 per PK)

USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (50 per CS )