Microplates

24 square deep well plate 10ml,v bottom,kingfisher flex, dnase & rnase free, without cap,sterile, 5 pieces/pack, 50 pieces/case (50 per CS )

Silicone Sealing Mat, 96-well, "-" perforated, Round for Deep Well Block (2mL), Printed Alpha-numerics; 10 Mats/Bag, 5 Bags/Case CS 50 (50 per CS )

96 Well Plates, transparent, immunoGrade, F-bottom, Pack 100 (100 per PK)

US VI Polypropylene Tubes, HDPE Caps.Self-standing: the vial placed on the lab workbench steadily even without a base.Electron Beam Sterilization, SAL=10-6: safe, fast, environment-friendly, no chemical residues.100,000-level Clean Workshop Production, DNAse-free, RNAse-free, pyrogen-free, endotoxin-free.Temperature Range: Approx.-196C to 121CExcellent sealing performance, no leakage of negative pressure 95Kpa, ensuring safe and effective air transportation.RNase and pyrogen freeElectron beam sterilization, SAL=10-6 (50 per CS )

Compression molded silicone sealing mats with 7.3mm diameter round plugs, are designed for standard 96-well storage and assay plates. Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. Mats fit tightly into wells preventing evaporation of VOCs, sample loss in storage, cross contamination, and reducing the risk of aerosols and pathogens venting during the automation process. They work in a wide range of temperatures for incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents. These seals pare well with automation as-well-as manual laboratory protocols. Often used in high-throughput applications or those involving accessing the sample through the cover multiple times. High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. Well perforations will seal themselves, after penetration, ensuring an airtight closure. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. (50 per CS )

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

Multiwell Cell Culture Plates 96-well Flat-Bottom with lid. Nontreated Surface. Sterile. Polystyrene. GROWTH AREA: 0. 32 cm2. WELL VOLUME: 0. 37 ml. FEATURES. Crystal-grade polystyrene. Sterilized by gamma irradiation. Nonpyrogenic. (50 per CS )

12-well Insert 2in1, PET-membrane 8.0 µm, multipack (1 per EA)

96 Well Plate Lids with Rings, Pack Of 100 (1 per EA)

Temperature range: -80 to +121C Clear polycarbonate cover for easy identification - Solid Polypropylene base (50 per CS )

OptiWell™ Deep Well Plate, 24 Square Well, 10mL, 41.9mm height, V-bottom, for Kingfisher and Accuris IsoPURE, Black Alphanumeric Printing, PP, 10 bags of 5 pieces, 50 / CS (50 per PK )

Krystal 24-well White Body, Clear bottom 3.1mL Polystyrene microplate. Used for immunoassay and HTS. (68 per CS )

Made of USP VI polypropylene. Autoclave at 12C /15 Ib. Non-pyrogenic, Dnase/Rnase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (50 per CS )

96 Well Plate, white, pureGrade Sterile, Trans F-Btm,Pack 50 (50 per PK)

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

12-well Insert 2in1, PET membrane 3.0 µm (48 per PK)

USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (50 per CS )

Made of USP VI polypropylene. Autoclave at 121 /15 Ib. Non-pyrogenic, Dnase/Rnase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (25 per CS )

Polystyrene clear lid for all 96 well ANSI/SLAS standard plates (100 per CS )

Corning 96 Well White Flat Bottom Polystyrene NBS Microplate, 25 per Bag, without Lid, Nonsterile (100 per CS )

Biologix 6-well (external dimensions: 85.4mm(w)x127.6mm(l)x20.2mm(h) - well dimesions: 35mm(d)x17.5mm(h) - working volume: 3ml) clear polystyrene (tc-treated) sterile cell culture plates with lids. plates come individually wrapped. 50/case (50 per CS )

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

1536 Well Plate, transparent, pureGrade, F-Bottom,Pack Of 50 (50 per PK)

Made of USP VI polypropylene. Autoclave at 121 /15 Ib. Non-pyrogenic, Dnase/Rnase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (500 per CS )