Supplies

Heavy gauge rectangular construction for easy stacking and storage. These pipette cans can be sterilized by autoclave or dry heat. (do not exceed 400 degrees F). Includes silicone pad on the inside of top and bottom to protect pipette tips. --Satin finish surface of entire can for convenient marking or coding. --Silicone pads on inside of top and bottom protect pipette tips. --Material: 304 stainless steel .031” thick (1 per EA )

The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having to open the door limiting possible contamination problems and temperature fluctuations. The convenient interior accessory outlet allows the use of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakers and Magnetic Stirrers. Optional stainless steel shelf creates additional space for storing cell culture plates and flasks. (1 per EA )

The Bellco Pipette Plugger is designed for plugging a full range of standardized cotton plugging pipettes. This unit has three speeds and can be adjusted quickly and easily to plug 40, 50 or 60 pipettes per minute. The unit will produce uniform shape cotton plugs, minimizing the problem of tight and loose plugs. Machine is portable with a convenient carrying handle. Time tested design with a precision Geneva mechanism. --Speed Range: 3 Settings, Approximately 40/50/60 Pipettes/Minute --Weight: 19 Lbs. (9.0 Kg) --Operates In: Continuous Or Actuate Mode --Supplied With 1 Bag Of Cotton Roving 7750-22222 (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. Accepts Bellco stainless steel closures and KAPUT closures Specifications: Flint Glass #2 Wall Weight Type 1 Class A Borosilicate Glass Sizes: 25x100mm Closure Size: 25mm Case Quantity: 144 (144 per CS )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller Size: 100ml Center Cap:70mm Sidearm cap: 32mm OD X OAH:65 X 135 (1 per EA )

Bioreactor Hose Barb Assembly The Stainless Steel 45mm compression and hose barb cap assembly is designed with a 1/4” ID compression fitting for insertion of tube accessories and 1/4” OD hose barb for silicone tubing attachment. The compression fitting is supplied with a nylon ferrule for easy adjustment of tubes. A blue polypropylene open top cap and white silicone gasket are included. --316L stainless steel compression fitting and hose barb --Blue polypropylene 45mm screw cap with open top --White silicone rubber gasket (1 per EA )

Ideal for use with water baths for precise temperature control. Water jacketed low profile OHD vessel with: size: 3l four (4) vertical 45mm sidearms dimensions: 300mm od x 280mm overall height two (2) #4 hose connections material: type 1 class a borosilicate glass supply: 100mm pp blue cap & white silicone liner & four 45mm pp blue caps & pouring rings (1 per EA )

Size: 6l Seam welded w/ electropolish finish 3-port w/ siphon, fill & vent tubes Includes: 45mm pp cap & silicone gasket Dimensions: 1/4" OD x .152" ID Longest tube: 10 1/2" at curve (1 per EA )

These stainless steel port assemblies are designed for use with media storage bottles for adding and withdrawing media or liquids. The 2- port models feature a siphon vent tube and is supplied with a 45mm polypropylene blue open top screw cap and white silocone liner. DESIGNED FOR 5637 AND 5639 MEDIA STORAGRE BOTTLES. -WELDED, 316L STAINLESS STEEL CONSTRUCTION, 1/4" INCH OD TUBING. -ELECTROPOLISHED FINISH, CONTINUOUS SEAL WELD. -TWO PORT MODEL FEATURES SIPHON AND VENT TUBES. -LONG TUBE: 10" (1 per EA )

Used to generate a localized cold surface on the exterior of the finger. Commonly used for sublimation, and can also be used in re-flux or distillation operations. 7L. (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. 3 Side baffles positioned at 120 degree and 3 bottom baffles offset from the side baffles. GL45 polypropylene membrane cap has a sealed in 0.2u PTFE membrane. Cap can be tightened during autoclaving. Specifications: Type 1 Class A Borosilicate Glass Includes Polypropylene Membrane Cap And Pouring Ring Size: 2L Dimensions: 158x260mm Case Quantity: 3 (3 per CS )

2-port 45mm cap assembly, 8l For 8l 1964 style Over Head Drive vessels Long tube: 1/4"od x 16 1/4" Short tube: 1/4"od x 2.5/32" All tubes extended up 1.0" above the cap slug Supply 45mm s/cap & white silicone liner (1 per EA )

Thermowell assembly is manufactured from 316l stainless steel with 32ra finish or better. It can be used with rtd temperature sensor. Includes polypropylene screw cap and silicone gasket. There are also tubes for addition media and vent. Thermowell assemblies attach to the sidearms with a screw cap assembly. Specifications: Material: 316L Stainless Steel 32Ra Finish or Better Includes: Screw Cap & Silicone Gasket (1 per EA )

Flat Bottom Glass Pipette Canister W/Silicone Pad, Manufactured From Borosilicate Glass. All Components Will Withstand Repeated Dry Or Steam Heat Sterilization Bottom Pad Prevents Chipping Of Pipette Tips. Case Qty: 6 (6 per CS )

Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

The Bellco Auto-blot Mini Hybridization Oven consists of an incubator with an integral rotisserie device. The rotisserie has the capacity for up to 4 large hybridization bottles or 8 small hybridization bottles. Alternatively, any combination of large or small bottles can be used. This Auto-blot Micro Hybridization Oven features an advanced temperature controller for precise control of oven temperature. 14”x17”x13” (35x42x32cm) Int: 7”x15”x8” (18x37x20cm) 115v. (1 per EA )

Type 1 class a Borosilicate glass ideal for freeze drying or cryogenic storage. Tubular firing off constriction on the neck. Rigidly controller bottom to withstand pressure at low temperature. Tubular round bottom Length: 127mm Neck od: 7mm Capacity: 1ml (144 per CS )

Manufactured from Type1 Class B Borosilicate Glass. Large opening and sloping shoulders facilitate pouring and cleaning. Heavier walls prevent breakage of glass. Media storage bottles have white graduations and a marking area. They are supplied with rubber lined black phenolic screw cap. Specifications: Type 1 Class B Borosilicate Glass Sizes: 250ml (33)mm Cap OD x OAH: 66 x 149 Case Quantity: 12 (12 per CS )

The Bellco 100 mm Overhead Drive Cap Assembly is manufactured from 316L SST with dual bearings and seals. A dust shield for paddle assemblies (1/4” shaft) is included. Cap assembly features two 1/4” NPT female ports for addition of optional fittings. (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Designed with deep side baffles for optimal agitation. Large bottom surface for easy access with Bellco large orifice pipette. Break resistant lip Size: 4l OD x OAH – 205 x 360mm 2 per case (2 per CS )

SST Pitched Blade Impeller Material: 316l SST with electropolish finish English thread OD: 1 3/4" For 5/16" od shafts Usually requires 2 each (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Includes 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Suitable for all cell culture fermentation. Compatible with bellco over head drive and magnetic stirrers. Specifications: Material: Type 1 Class A Borosilicate Glass 100mm Center Neck Baffles: 0 Sidearms: 6 OD x OAH: 410 x 535mm (1 per EA )

These stainless steel port assemblies are designed for use with media storage bottles for adding and withdrawing media or liquids. The 2- port models feature a siphon vent tube and is supplied with a 45mm polypropylene blue open top screw cap and white silocone liner. DESIGNED FOR 5637 AND 5639 MEDIA STORAGRE BOTTLES. -WELDED, 316L STAINLESS STEEL CONSTRUCTION, 1/4" INCH OD TUBING. -ELECTROPOLISHED FINISH, CONTINUOUS SEAL WELD. -TWO PORT MODEL FEATURES SIPHON AND VENT TUBES. -LONG TUBE: 8 1/2" (1 per EA )

Flask Only. For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8" ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. Specifications: Jacket Volume (mL): 40ml Cap Size: 51mm Sidearm Cap Size (mm): 18 OD x OAH: 70x120mm (1 per EA )