Supplies

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm, sold separately Dimensions: 170" x 110" Flask size: 500ml (1 per EA )

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 19/32" (15mm) Tube size: 13mm Spacing: 6x12 holds 72 tubes Dimensions: 8 1/6" x 4 1/8" x 2" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .135"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

• Type 1 Class A Borosilicate Glass • Dimensions: 187mm OD x 470mm overall height • #12 Stopper Neck • Volume: 9.5 L (1 per EA )

Ideal for growing, storing and mixing or aerobic and anaerobic cultures. Threaded neck and sidearm with clean-out port. Supplied with 38mm and 18mm rubber lined black phenolic screw caps. Specifications: Type 1 Class A Borosilicate Glass Sizes: 500mL Includes: 38mm And 18mm Black Phenolic Screw Caps Sidearm Dimensions: 12x130mm Case Quantity: 4 (4 per CS )

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 11/16" (17.5mm) Tube size: 16mm Spacing: 6x12 holds 72 tubes Dimensions: 9 1/4" x 4 3/4" x 2 15/16" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .135"OD WIRE, CROSS WIRE: 0.062" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

The 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4" tubes. Specifications: Accepts All Standard Fittings And Probes 316L Stainless Steel Cap Seal with compression fittings for probes/tube insertion. 4 sidearms positioned 90° for increased capabilities. Accessories: 1965-11400 Flask Only, 1L 1965-60014 SST Cap seal, 1L, 5 port with IOB 1965-13400 Flask Only, 3L 1965-60034 SST Cap seal, 3L, 5 port with IOB 1965-45200 45mm Plug w/Compression Fitting & Hose Barb. (1 per EA )

The anaerobic culture bottle is designed for the growth of anaerobic bacteria and maintaining anaerobic conditions. The bottle features a 45mm screw cap with silicone o-ring and blue butyl rubber stopper. This allows for easy access of contents and eliminates the use of the traditional aluminum seal. Butyl rubber stopper allows for multiple punctures with a needle. Bottle is Borosilicate glass and cap is polypropylene. All components are autoclavable. Polypropylene screw cap with silicone gasket and butyl rubber stopper. Components are fully autoclavable @ 121°C. 6 per case. (6 per CS )

The Bellco Digital Mini-Orbital Shaker is a high speed shaker for general laboratory cell culture experimentation. This Bellco design incorporates an orbital platform that accepts a variety of optional trays. Peg and grommet design offers a simple method to install or change trays; four versions of trays are available. Brushless DC motor designed for minimal maintenance. (1 per EA )

Heavy gauge rectangular construction for easy stacking and storage. These pipette cans can be sterilized by autoclave or dry heat. (do not exceed 400 degrees F). Includes silicone pad on the inside of top and bottom to protect pipette tips. --Satin finish surface of entire can for convenient marking or coding. --Silicone pads on inside of top and bottom protect pipette tips. --Material: 304 stainless steel .031” thick (1 per EA )

Stainless Steel Baffle Assembly , 10L For 10L Bioreactor Systems. Manufactured from 316l stainless steel with ra32 finish or better inside and out. The assemblies attach to the headplate. (1 per EA )

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 1 1/16" (26.9mm) Tube size: 25mm Spacing: 3x4 holds 12 tubes Dimensions: 4 3/4" x 3 9/16" x 3 15/16" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .162"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

Manufactured from Type 1 Borosilicate Glass. Designed with deep side baffles for optimal agitation. Promotes enzyme digestion of tissue fragments and homogenates into cell suspense. Includes rubber lined black phenolic screw caps. Integral dam contains non-trypsinized tissue during decanting. Specifications: Type 1 Class A Borosilicate Glass Size: 250ml Sidearm Cap: 16mm Acid Etched & Filled Graduations TOP SCREW CAP SIZE IS 38MM SIDEARM SCREW CAP SIZE IS 16MM OD X OAH (mm): 80 X 163 Case Qty:3 (3 per CS )

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units feature a solid state control with heavy-duty DC motor and analog tachometer. Non-modular production models feature rubber bumpers, handles and a slotted rear guard. (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. The 3 side and bottom baffles are used for optimal agitation. 38mm DeLong style neck. Specifications: Type 1 Class A Borosilicate Glass Sizes: 4L Dimensions: 207x370mm Closure Sizes: 38 Case Quantity: 3 (3 per CS )

Description: Adjustable Hanging Bar Spinner Flask Complete, 25ml Bellco Adjustable Hanging Bar Spinner Flasks were designed for the efficient growth of suspension cells at low speeds. This flask is manufactured of medium-walled borosilicate glass tubing with black phenolic screw caps. The hanging spinner is adjustable and useful over a wide range of stirring speeds. The 1967-style spinner includes a center screw cap with a stopper for mounting the glass impeller shaft. Adjustable Hanging Bar Spinner Flask consists of: Flask, Impeller Assembly, Impeller Glass Shaft, and Cap Assembly. Flask Specifications [1967-10025]: Material: Type 1 Class A Borosilicate Glass Dimensions: 38.1mm OD x 120mm Overall Height, Two 18mm Sidearms angled 40° offset center One 38mm Screw Thread Center Neck Flask has flat bottom – no dimple Graduations: 5mL to 25mL, every 5mL – White Ink (Approx Volumes) Supply with: Two Rubber Lined Black Phenolic Caps Impeller Assembly Specifications [1969-30025]: Impeller Assembly consists of impeller magnet & magnet holder Impeller magnet: PTFE coated magnet, 25.4mm long x 7.62mm OD (approx.) Magnet Holder: White PTFE, 34.9mm long x 15.9mm OD Glass Shaft Specifications [1969-70100]: Material: Type 1 Class A Borosilicate Glass Dimensions: 7mm OD x 120mm long Cap Assembly Specifications [1967-90038]: Cap Assembly consists of screw cap and stopper Screw Cap: 41mm OD x 37.8mmH with 20.6mm center hole #4 Stopper: Silicone with 6.4mm center hole (1 per EA )

3L bioreactor headplate . Manufactured from 316l stainless steel with ra 32 finish or better inside and out. Fittings are sold separately as part of the system. (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Designed for the measurement of microbial co2 production over time. Ideal for bio-remediation studies. All components are autoclaveable. Flask only 250mL, 1 each. (1 per EA )

Ideal use for over head drive vessels. Description: 3L OHD Impeller Assembly Consists of Paddle, Plug, Paddle Holder, and Drive Shaft. Overall length is adjustable from 8.75”-10.75” with ½” increments. Paddle [A523-206]: PTFE material, 108.0 mm wide x 44.5mm tall x 0.8mm thick Plug [A542-49]: PTFE, 9.5mm OD x 19.1mm long (approx.) Paddle Holder [A542-87]: White PTFE, 184.2mm long x 19.1mm OD Drive Shaft [A542-317]: 316L SST, 158.8mm long x 6.4mm OD (approx.) (1 per EA )

Black Phenolic Screw Cap Assembly For Adjustable Hanging Bar Spinner Flask Black phenolic screw caps are manufactured from specially formulated phenolic resin to resist the effects of temperature and steam autoclaving. They have a non-toxic white rubber liner for all general culture applications. Consists of screw cap liner and stopper or compression fitting. 51mm. (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Size: 250ml Dimensions: 128x235mm Closure Size: 38 Case Quantity: 6 (6 per CS )

Type 1 class a Borosilicate glass that are designed for maintaining anaerobic conditions. Useful for studies involving methane-producing bacteria, cell culture, drug discovery, and research and development. Specifications: Size: 500ml Neck Finish: #20 Alum Seal Neck, Dimensions: 85mm OD x 176mm OAH, Neck Dimensions: 19.7-20.2mm OD, 13.3-13.6mm ID, Grad. Range: 100mL-400mL, every 100mL, Supply with #20 Septum Stopper & Alum Seal. (6 per CS )

Stainless steel 3L low profile impeller assembly For low profile Over Head Drive vessel Material: SST 316L Electropolish finish, ra 32 or better Fully assembled Paddle dimensions: 2" T X 5 1/4" W (1 per EA )

Bell-ennium Process Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. The Front-End models are designed to position so that one flask is positioned behind the other, minimizing the width of the stirrer for limited space work areas. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. Heavy duty magnet assemblies provide the best magnetic coupling while timing belts on all positions insure smooth even stirring of vessel contents. The low profile chassis measure 11 x 20 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. The PID process controller provides RS-485 communication with your existing lab network (software not included), as well as two alarm outputs for the optional Motion Alarm. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

Manufactured from 316l stainless steel with ra32 finish or better inside and out. The assemblies attach to the headplate. SST Baffle Assembly For 3L English Headplates Size: 3L Material: 316L SST with electropolish finish Baffle Shaft: .250" OD x 6 1/4" long (1/4-28 TPI thread) Baffle Plate: .625" OD x 7" long x .090" thick No Insertion Length: 9 1/8" Supply with A542-407 - O-ring & 1/4-28 SST Hex Nut (1 per EA )