Supplies

Description: Glass Impeller Shaft Size: 25-100mL For Bellco 25-100mL Spinner Flasks & Impeller Assemblies Material: Type 1 Class A Borosilicate Glass Dimensions: 7mm OD x 120mm Long (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. The 3 side and bottom baffles are used for optimal agitation. 38mm DeLong style neck. Specifications: Type 1 Class A Borosilicate Glass Sizes: 3L Dimensions: 182x340mm Closure Sizes: 38 Case Quantity: 3 (3 per CS )

Used to surround a single cell to create homogeneous culture of cells rather than mixed population. The flat end ensures tight sealing with surface of culture dish. Sizes: 10x10mm (125 per CS )

Heavy gauge rectangular construction for easy stacking and storage. These pipette cans can be sterilized by autoclave or dry heat. (do not exceed 400 degrees F). Includes silicone pad on the inside of top and bottom to protect pipette tips. --Satin finish surface of entire can for convenient marking or coding. --Silicone pads on inside of top and bottom protect pipette tips. --Material: 304 stainless steel .031” thick (1 per EA )

Type 1 Class A Borosilicate Glass 45L #12 Stopper Neck 410mm OD x 584mm OAH (1 per EA )

The Bellco Digital Mini-Orbital Shaker is a high speed shaker for general laboratory cell culture experimentation. This Bellco design incorporates an orbital platform that accepts a variety of optional trays. Peg and grommet design offers a simple method to install or change trays; four versions of trays are available. Brushless DC motor designed for minimal maintenance. (1 per EA )

Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

Type 1 class a Borosilicate glass for freeze drying or cryogenic storage. The neck has pre-drawn constriction to facilitate sealing. Flat bottom Constriction neck Neck od : 8mm Bottom od: 11mm Capacity: 1ml Length: 145mm (144 per CS )

Heavy gauge rectangular construction for easy stacking and storage. These pipette cans can be sterilized by autoclave or dry heat. (do not exceed 400 degrees F). Includes silicone pad on the inside of top and bottom to protect pipette tips. --Satin finish surface of entire can for convenient marking or coding. --Silicone pads on inside of top and bottom protect pipette tips. --Material: 304 stainless steel .031” thick (1 per EA )

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8" ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. Specifications: Jacket Volume (mL): 1300ml Cap Size: 100mm Sidearm Cap Size (mm): 45 OD x OAH: 200x330mm (1 per EA )

Bellco Magnetic Stirrers are specifically designed for growing both mammalian and bacterial cultures where minimal heat transfer from the magnetic stirrer to the culture vessel is essential. They are ideal for tissue cultures grown in spinner flasks. Bellco incorporates low wattage DC motors to reduce stirrer heat up. Independent power and speed controls allow unit to maintain a speed setting when switched on and off. Powerful magnets rotate on ball bearing shafts for increased coupling and continuous maintenance free service. Polyurethane drive belts resist humidity and temperature. The 100V, 115V & 230V models feature a convenience outlet that allows daisy chaining of up to ten stirrers. Speed range: 30 - 1000 rpm +/- 5% (1 per EA )

The anaerobic culture bottle is designed for the growth of anaerobic bacteria and maintaining anaerobic conditions. The bottle features a 45mm screw cap with silicone o-ring and blue butyl rubber stopper. This allows for easy access of contents and eliminates the use of the traditional aluminum seal. Butyl rubber stopper allows for multiple punctures with a needle. Bottle is Borosilicate glass and cap is polypropylene. All components are autoclavable. Polypropylene screw cap with silicone gasket and butyl rubber stopper. Components are fully autoclavable @ 121°C. 6 per case. (6 per CS )

Low Profile Glass Impeller Assembly Size: 3000ml (for low profile 3l vessel) Paddle: 3" tall x 7" wide (1 per EA )

Ideal for florescence and con-focal microscopy Size: 25mm round od Material: German glass ( d-263m) 200 areas in diamond pattern Each square measures 0.6mm x 0.6mm Facilitates mounting of micro-manipulated cells or chromosome spreads Line thickness: .02mm (25 per CS )

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 15/16" (23.8mm) Tube size: 20-22mm Spacing: 3x4 holds 12 tubes Dimensions: 4 5/16" X 3 1/4" X 3 15/16" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .135"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

Heavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp.Can be used with series 500 controllers or with CellTrol II (no speed) and OHD or high speed motor system. Large flange omni vessels for use with stainless steel headplate, 5l thru 36l Heavy walled construction for cell culture and fermentation applications Heavy duty o-ring flange creates positive seal For use with stainless steel headplate, o-ring and locking clamp 36L flat bottom omni vessel OD = 410mm , H = 515mm Use with 200mm large flange headplate (1 per EA )

SST Sample Port Assyembly for 7l bioreactor systems - English threads Material: 316l SST with electropolish finish - inside & out Tubing specifications: .250" od x .152" id Overall length: 14 5/16" Insertion length: 12 7/8" Supply with SST 3/8-24 nut & o-ring (1 per EA )

Leighton culture tubes are useful for the study of pathogenic effects on viruses on cells as well as sponge matrix culture and nutritional studies. Use cover slips for preparing expectant tissue cultures with leighton culture tubes. White marking area (36 per CS )

Stainless Steel Angled 2-Port assembly 45mm with Hose Barbs for easy attachment of silicone tubing. 2-Port Assembly attaches to vessel side arms with 45mm screw cap. 316l stainless steel finish of ra 32 or better - inside & out TUBE SPECIFICATIONS: 1/4" OD X .156" ID. BOTH TUBES ARE BENT ABOVE CAP SLUG. ONE TUBE IS HOSE BARB ON TOP & FLUSH UNDER CAP SLUG. OTHER TUBE IS HOSE BARB ON TOP & 15/16" LONG BELOW WITH HOSE BARB. SUPPLY WITH HI-TEMP 45mm OPEN TOP SCREW CAP & WHITE SILICONE LINER. (1 per EA )

Heavy gauge rectangular construction for easy stacking and storage. These pipette cans can be sterilized by autoclave or dry heat. (do not exceed 400 degrees F). Includes silicone pad on the inside of top and bottom to protect pipette tips. --Satin finish surface of entire can for convenient marking or coding. --Silicone pads on inside of top and bottom protect pipette tips. --Material: 304 stainless steel .031” thick (1 per EA )

Hi-torq SST OHD impeller assembly, full width Size: 15l For hi-torq motor & cap assembly (7774-40115/40230/ & 7764-74000) Similar to 1964-60015 but to accept 1/2" shaft from 7764-74000 cap assembly Material: 316l Paddle size: 3" tall x 9" wide (1 per EA )

Ideal use for over head drive vessels. 15L OHD Impeller Assembly Consists of Paddle, Plug, Paddle Holder, and Drive Shaft Paddle [A523-214]: PTFE material, 171.5mm wide x 76.2mm tall x 1.6mm thick Plug [A542-49]: PTFE, 9.5mm OD x 19.1mm long (approx.) Paddle Holder [A542-50]: White PTFE, 279.4mm long x 19.1mm OD Drive Shaft [A542-47]: 316L SST, 215.9mm long x 6.4mm OD (approx.) (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Ideal for all cell culture and media storage purposes. Provides flexible secure seal without a liner. Supplied with gl45 liner-less screw cap and pouring rings. Graduated to approximate volumes. Size:2L Dimensions: 158x260mm (3 per CS )

The Bellco Sci-ERA Dual Pan Hot Shaker is a slow speed, large orbit shaker with two independently controlled baths for incubation of electrophoretic gels and filter hybridization media. Stringent temperature control with a sensitivity of +/-0.1oC is useful for many biochemical assays. This Bellco design incorporates a seamless stainless steel lined temperature controlled water bath mounted on a low-profile one inch orbiting platform. The unique chamber design offers simple containment of potential spills. The chamber is completely isolated from electromechanical components. The Sci-ERA Dual Pan Hot Shaker has audible over-temperature alarms and built-in safety features to prevent heater burn-out. An easy-to-use microprocessor controller offers stringent temperature control. (1 per EA )