Reusable Glassware

Round Bottom Glass Pipette Canister. Manufactured From Type 1, Class A Borosilicate Glass Components Will Withstand Repeated Dry Or Steam Heat Sterilization Case Qty: 6 (6 per CS )

Manufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Ideal use for cell culture and reduces shear in delicate cell culture. Blade dimension: 5 3/4 x 2 1/2" Shaft oal: 12" MARINE IMPELLER INCLUDES 1/2" SHAFT AND IMPELLER BLADE OMNI AND Z-Z PADDLES ARE ONE PIECE WELDED, 1/4" SHAFT (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 100ml Sidearm cap: 32mm (included) (1 per EA )

Adjustable Hanging Bar Spinner Flask without Bottom Dimple PTFE impeller assembly rides on glass bearing for friction free operation. 25 & 50mL have black phenolic rubberlined center and sidearm caps. 100mL-300mL have polypropylene caps, silicone gasket and pouring rings accumulation of microcarrier beads under impeller. 100mL. Center cap: 70mm, side arm 32mm. Dimensions: 69 OD x 110 OAH (1 per EA )

Adapters Distillation Bent 105 with Vacuum Take-Off [standard taper] Joints 14/20. Hose Connection #1. Approx. Overall Height (mm) 100 With a hose connector and a drip tip. (1 per EA)

Condensers Liebig Medium Length [standard taper] Joints [standard taper] Top Joint 14/20. [standard taper] Bottom Joint 14/20. Approx. Condensing Area (cm2) 34. Hose Connections #1. Approx. Overall Height (mm) 178 Design eliminates bulbs where holdup is likely to occur. (1 per EA)

KONTES Boiling Flasks Round Bottom 25ml single neck flask with outer [Standard Taper] 14/20 joint. (1 per EA)

Labsets kits Organic Chemistry Microscale Threaded Standard Academic MICROFLEX EKONO-CASE Standard Threaded Microscale Kit The 747000 Series MICROFLEX Kits feature versatile threaded chaste connections. They can be assembled rightside up or upside down providing great versatility. (1 per EA)

Adapters Connecting Threaded Microscale GPI Thread Size 13-425. [standard taper] Joint 14/20. Approx. Overall Height (mm) 50 [standard taper] inner ground joint to GPI thread. Allows interfacing of [standard taper] outer ground jointed glassware with threaded microscale components. (1 per EA)

Microscale Distillation Head Hickman Threaded Alembic Capacity (mL) 1. Flask Vol. (mL) 5. GPI Thread Size 13-425. Approx. Overall Height (mm) 80 Ideally suited for micro distillations especially for separations of high boiling samples. Flask is an integral component. (1 per EA)

Labsets kits Organic Chemistry Microscale Threaded Standard Academic MICROFLEX Item N GC Collection Tube 8-425 The 747000 Series MICROFLEX Kits feature versatile threaded chaste connections. They can be assembled rightside up or upside down providing great versatility. (1 per EA)

HPLC Adapter Solvent Pickup ULTRA-WARE Pickup Adapter Body 47mm Designed to be used with the Five Valve Four Valve and Filtration caps to provide safe in-line filtration that replaces the traditional pour-and-wait funnel filtration method. (1 per EA)

Still Head - Screw Thread 24/29 Socket Size (1 per EA )

For leighton type tissue tubes. Hinged front of rack locks tubes into position. For tube lengths: 83 to 93mm Tubes per rack: 36 (1 per EA )

Heavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Use with series 500 controllers or with CellTrol II (no speed) and OHD. 15L flat bottom omni vessel 292 x 440mm. Takes 200mm large flange headplate. (1 per EA )

All port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene cap. (1 per EA )

All port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene cap and gasket.For 500mL flasks. Longest tube length 2.5". (1 per EA )

Size: 8l Seam welded w/ electropolish finish 3-port w/ siphon, fill & vent tubes Includes: 45mm pp cap & silicone gasket Dimensions: 1/4" OD x .152" ID Longest tube: 11" (1 per EA )

Flask only. For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8" ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. Specifications: Jacket Volume (mL): 7500ml Cap Size: 100mm Sidearm Cap Size (mm): 45 OD x OAH: 300x465mm (1 per EA )

Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation Cap size: 100mm Flask size: 250ml Dimensions: 85 x 140mm Sidearm : 32mm (1 per EA )

Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 100mm Flask size: 36l Dimensions: 410 x 545mm Sidearm cap: 45mm (1 per EA )

Description: Glass Ball Spinner Comp, 3000mL Size: 3000mL Material: Type 1 Class A Borosilicate Glass Flask Dimensions: 165mm OD x 290mm OAH, two 45mm sidearms offset at 53º, 100mm center neck Includes two 45mm blue PP screw caps & two 45mm blue PP pouring rings Impeller Assembly: one 100mm blue PP screw cap, 100mm Teflon cap seal, 100mm blue silicone sealing gasket, soft silicone flex tube, glass ball magnet tube, and magnet Specially Formed Bottom Indent Prevents Accumulation under impeller Glass ball houses a magnet for gentle agitation of Micro carrier Beads (1 per EA )

Ideal for growing, storing and mixing or aerobic and anaerobic cultures. Threaded neck and sidearm with clean-out port. Supplied with 38mm and 18mm rubber lined black phenolic screw caps. Specifications: Type 1 Class A Borosilicate Glass Sizes: 1L Includes: 38mm And 18mm Black Phenolic Screw Caps Sidearm Dimensions: 12x130mm m Case Quantity: 4 (4 per CS )

The Bellco Process Controlled Bottom Drive Roller Apparatus holds up to 50 (see specifications below) full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length). The unit features a brushless DC motor and controller that operate at bottle speeds ranging from 0.3 to 9.0 rpm with the ability to select clockwise or counter clockwise direction. Units feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Four corner bumpers and two locking castors (on the front wheel positions) are also provided. Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. (1 per EA )