Reusable Glassware

Manufactured from Type 1 Class A Borosilicate Glass with a low coefficient of expansion. Heavy wall beakers meet astime-960 type 1 specifications for classification design capacity and markings. Features a easy pour spout, white permanent graduations and a large marking square. Specifications: Type 1 Class A Borosilicate Glass Size: 250mL Dimensions: 70 x 87mm Case Quantity: 12 (12 per CS )

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units feature a solid state control with heavy-duty DC motor and analog tachometer. Non-modular production models feature rubber bumpers, handles and a slotted rear guard. (1 per EA )

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses, and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units feature a solid state control with heavy-duty DC motor and digital display. All Position Drives are for use with plastic roller bottles to prevent slipping of the light-weight bottles. Roller Shaft Construction: Non-transferring chemical-resistant rubber rollers with key-shape. Clearance between Decks for Bottle Placement: 134 mm. Construction Material: Aluminum, enamel finish. Usable Roller Length: 51 cm. Brushless motor with controller for smooth operation and no maintenance. Easy-to-remove roller bar assembly (tool provided). Digital LCD display. Locking speed control knob. All position drives. Accepts all Bellco Roller Bottles (glass or plastic* in 110mm or 120mm diameter). Battery backup provides 18 hour service (typical at 2 RPM). Battery backup includes both audible and visual indicators. Motion Alarm (1 per EA )

The Bellco Bench top Modular Roller Apparatus is a variable speed two bottle roller apparatus (expandable to six bottles) used for the purpose of producing animal cells or cell products. This small sized unit is ideal for experimental and pilot-scale cell culture. The unit features a heavy-duty DC motor and solid-state electronics for reliable operation. The unit includes All-Position Drive belts so that every roller rotates, thus preventing slippage of light-weight plastic bottles. Bellco’s unique hex-shaped shafts prevent roller slippage and produce positive drive. (1 per EA )

Deck only for bench-top modular roller apparatus 7632-00115 & 7632-00230. 2 position Deck to deck spacing: 7" (1 per EA )

HTS Accessory Tray,12" x 12" for Micro-plates. Dimensions: 30 x 30cm Holds 24 micro-plates (1 per EA )

H/S Vertical Lift Impeller-5L Complete. Consists Of: 7764-75008 & 7764-76005. Dimensions: (Shaft); 5/8"OD X 14" Long., (Disk); 3" OD. 316L Sst (1 per EA )

H/S Vertical Lift Impeller-15L Complete. Consist Of; 7764-75015 & 7764-76015. Dimensions: (Shaft); 5/8"OD X 20 3/4" Long, (Disk); 3 3/4" OD. 316L Sst (1 per EA )

Triple Addition Assembly. For GL45 sidearms. Manufactured from 316l stainless steel with electropolish finish ra 32 or better inside and out. Supply with PP blue Open top s/cap & white silicone liner. All tubes: 1/4" OD x 4 1/4" long. Inseration Length: 3 3/32". Application: Individual ports for liquid additions or redundant vent/overlay. Vertical Side Arm vessels for acid, base, antifoam, media & other additions. (1 per EA )

Adjustable Hanging Bar Spinner Flask without Bottom Dimple PTFE impeller assembly rides on glass bearing for friction free operation. 25 & 50mL have black phenolic rubberlined center and sidearm caps. 100mL-300mL have polypropylene caps, silicone gasket and pouring rings accumulation of microcarrier beads under impeller. 50mL. Center cap: 51mm, side arm 18mm. Dimensions: 55 OD x 110 OAH (1 per EA )

Short Path Distillation Apparatus Utilizes a thermometer bulb as column packing. Compact head and condenser. Cow type receiver for best product recovery. Pear shaped flask has [Standard Taper] 10/18 side arm for bleed tube. 14/20 [Standard Taper] joints. #1 Hose connections. 190Hx215Wmm. (1 per EA)

Tubes Drying U-Shaped Full Length [standard taper] Joint [standard taper] Joint 24/40. Approx. Overall Height x Width (mm) 185 x 80 Inner joint at the bottom with a bulb desiccant chamber. Unit is supplied with a vent tube as illustrated. (1 per EA)

Tubes Culture Disposable Borosilicate Glass Size (mm) 16 x 150 Kimble round bottom culture tubes are available in borosilicate or flint glass. Tubes are annealed to reduce breakage along stress points and feature smooth tops and bottoms to prevent cuts.

Used to generate a localized cold surface on the exterior of the finger. Commonly used for sublimation, and can also be used in re-flux or distillation operations. 3L. (1 per EA )

Ideal for use with over head drive vessels. Manufactured from 316l electropolished stainless steel with 32ra finish or better. 1-siphon tube 15 5/8" long 1-fill tube 2 17/64" long 1-vent tube 1" long. 45mm 3-PORT ASSY FOR 1964 - STYLE OHD VESSEL, 8 & 15L. SUPPLY 45mM S/CAP (A523-599) & WHITE SILICONE LINER (A523-600). LENGTHS ARE MEASURED FROM TOP OF S/A TO BTTM OF TUBE (1 per EA )

Material: 316l SST with electropolish finish, ra 32 or better, inside & out Dimensions: harvest tube (3/8" od) - 1" above slug, 10 9/32" insertion length Addition tube (1/4"od) - 1" above slug, 2 21/64" below Vent tube (1/4" od) - 1" above slug, .975" below Supply with 45mm PP blue open top screw cap & white silicone gasket (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 6l Center Cap:100mm Sidearm cap: 45mm OD X OAH:204 X 410 (1 per EA )

Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. Sealed internal assembly requires less incubator space. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 100mm Flask size: 36 PADDLE; L X W:9.5 X 6 IN (1 per EA )

The Bellco Process Controlled Bottom Drive Roller Apparatus holds up to 50 (see specifications below) full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length). The unit features a brushless DC motor and controller that operate at bottle speeds ranging from 0.3 to 9.0 rpm with the ability to select clockwise or counter clockwise direction. Units feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Four corner bumpers and two locking castors (on the front wheel positions) are also provided. Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. (1 per EA )

The Bellco Process Controlled Bottom Drive Roller Apparatus holds up to 50 (see specifications below) full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length). The unit features a brushless DC motor and controller that operate at bottle speeds ranging from 0.3 to 9.0 rpm with the ability to select clockwise or counter clockwise direction. Units feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Four corner bumpers and two locking castors (on the front wheel positions) are also provided. Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. (1 per EA )

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units feature a solid state control with heavy-duty DC motor and analog tachometer. Non-modular production models feature rubber bumpers, handles and a slotted rear guard. (1 per EA )

The Bellco Sci/ERA Cell Production Roller Apparatus has been designed for production of mammalian cells, viruses and cell products. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. All units feature a solid state control with heavy-duty DC motor and digital tachometer. All Position Drives are for use with plastic roller bottles to prevent slipping of the light-weight bottles. A Stand-By Drive and Alarm System provides motion and power failure alarms and has a backup drive system that automatically drives the unit should the original fail. (1 per EA )

H/S Impeller Shaft only,5L . Bore x OAL 5/8 x 14" (1 per EA )

70 Mm Rotisserie For Mega Hybridization Oven. Holds Eight 70Mm I.D. Hybridization Bottles (Sold Separately). Manufactured From Stainless Steel. (1 per EA )