This category covers plastic bottles and jars for storing reagents, samples and solutions, from 2 mL sample cups and 8 mL Boston rounds to 5 L storage bottles and 4000 mL wide mouth jars. Materials include HDPE, LDPE, polypropylene, polystyrene and polycarbonate, in narrow mouth, wide mouth, Boston round, square and graduated styles, with natural and amber options. It also includes wash bottles pre-labeled for distilled or deionized water, acetone, ethanol, methanol and isopropanol, sterile polycarbonate storage bottles, samplers with graduated bottles, and precleaned jars with lined closures.

Match the plastic to the contents: HDPE and polypropylene resist most aqueous solutions, acids and bases, polypropylene can usually be autoclaved, and LDPE is soft enough for squeeze bottles. Choose narrow mouth bottles for pouring liquids and wide mouth jars for solids and easy filling. Use amber bottles for light-sensitive contents and sterile or precleaned containers where contamination matters, and check the closure size, liner and pack quantity before ordering.

Bottles and Jars, Plastic: common questions

How many ounces is a 1000 mL bottle?

1000 mL is one liter, or about 33.8 US fluid ounces, a little more than a quart (32 fl oz). Bottle capacities are usually nominal, meaning the bottle holds that amount with some headspace below the neck, so the brimful volume is somewhat larger. When a bottle is labeled in both units, the ounce figure may be rounded.

Which plastic should I choose for lab bottles?

It depends on the contents and how you will clean the bottle. HDPE is rigid and resists most acids, bases and aqueous solutions. Polypropylene has similar chemical resistance and can generally be autoclaved. LDPE is flexible, so it is used for wash and squeeze bottles. Polycarbonate is clear and strong but less resistant to some chemicals. For solvents, check a chemical compatibility chart.

Why are wash bottles labeled and color-coded?

Labeled wash bottles show what they contain, such as acetone, ethanol, methanol, isopropanol or distilled water, with color coding so bottles are not mixed up at the bench. That reduces the chance of rinsing with the wrong liquid or refilling a bottle with an incompatible one. Keep each bottle for the liquid printed on it.

What does precleaned mean for a sample jar?

A precleaned jar has been washed and packaged by the manufacturer so it can be used for sample collection without cleaning it in the lab first, which matters when trace contaminants could affect results, as in environmental testing. Cleaning standards differ between products, so check the product information or certificate to see what the container was cleaned and tested for.

Bottles and Jars, Plastic

Filters
Set Descending Direction

363 items

Page
per page
View as List Grid
  1. Washbottle GHS WM Ethanol, LDPE 250mL
    Manufacturer: Dynalon
    Washbottle GHS WM Ethanol, LDPE 250mL (5 per CS)
    Learn More
    was $61.02 Special Price $41.21
  2. Bottle NM Bulk w Caps, HDPE 2oz
    Manufacturer: Dynalon
    Bottle NM Bulk w Caps, HDPE 2oz (720 per CS)
    Learn More
    was $1,050.71 Special Price $709.39
  3. Bottle wTamper Evident Cls , HDPE 500mL
    Manufacturer: Dynalon
    Bottle wTamper Evident Cls , HDPE 500mL (30 per CS)
    Learn More
    was $159.69 Special Price $107.81
  4. Rack Microcentrifuge Tube, HDPP 1.5mL
    Manufacturer: Dynalon
    Rack Microcentrifuge Tube, HDPP 1.5mL (6 per CS)
    Learn More
    was $182.82 Special Price $123.45
  5. Bottle Dispensing, HDPE 1000mL
    Manufacturer: Dynalon
    Plastic dispensing bottles with sealer style closure. Tall style cylindrical HDPE bottle is supplied with LDPE spout and sealer cap. Sealer snaps on easily for tight seal. Spout openings are standard .030” and can be enlarged by cutting tip. Maximum temperature for both LDPE and HDPE is 80°C. (12 per CS)
    Learn More
    was $68.24 Special Price $55.28
  6. Bottle WM Bulk w Caps, HDPE 8oz
    Manufacturer: Dynalon
    Bottle WM Bulk w Caps, HDPE 8oz (180 per CS)
    Learn More
    was $564.70 Special Price $381.27
  7. Bottle Disp/Sealer, LDPE 8oz
    Manufacturer: Dynalon
    Wide array of low density polyethylene bottles are supplied with a variety of closures to suit any dispensing application. Sealer cap bottles supplied in capacities from 15 to 500 mL with dropping caps, ribbon spread caps and bellows all supplied in more limited sizes. (36 per CS)
    Learn More
    was $145.03 Special Price $97.92
  8. Bottle Spouted, LDPE 30mL
    Manufacturer: Dynalon
    The white polyethylene screw cap on the 30 and 60mL Azlon Dropper Cap Bottles has a pivoting nozzle which can be raised to give a direct jet of liquid as the bottle is squeezed. When the nozzle is closed on the dropper caps the passage for liquid is shut off to give an airtight seal at normal pressure, although when the nozzle is partly open it makes an excellent dropping device. (10 per CS)
    Learn More
    was $23.00 Special Price $15.53
  9. Bottle NM Bulk w Caps, PP 8oz
    Manufacturer: Dynalon
    Bottle NM Bulk w Caps, PP 8oz (180 per CS)
    Learn More
    was $550.82 Special Price $371.90
  10. Bottle w Short Spout, LDPE 100mL
    Manufacturer: Dynalon
    An ideal LDPE bottle for water and oils - there are no shoulders on these spout dropping bottles to restrict the flow. Graduated and can be secured using shoulder and cap tag to avoid sample contamination in transit. Conforms to DlN 13316 and 168. Supplied with LDPE cap for tip closure. (10 per PK)
    Learn More
    was $71.56 Special Price $48.32
  11. Bottle WM Graduated, PP 60mL
    Manufacturer: Dynalon
    Bottle WM Graduated, PP 60mL (12 per CS)
    Learn More
    was $62.51 Special Price $42.21
  12. Bottle wTamper Evident Cls , HDPE 100mL
    Manufacturer: Dynalon
    Bottle wTamper Evident Cls , HDPE 100mL (100 per CS)
    Learn More
    was $273.04 Special Price $184.35
  13. Bottle Grad WM, LDPE 100mL
    Manufacturer: Dynalon
    Translucent, rigid polypropylene bottles are autoclavable and can withstand temperatures up to 135°C. Specially designed closure provides leakproof seal and has hole for tagging. FDA compliant for food and beverage. (100 per CS)
    Learn More
    was $473.71 Special Price $319.82
  14. Bottle Weighing, PP 20mL
    Manufacturer: Dynalon
    Reduce the tare weight correction with these light weight, autoclavable, reusable translucent bottles. Highly resistant to acid attack. (10 per PK)
    Learn More
    was $90.90 Special Price $73.65
  15. Bottle WM Bulk w Caps, HDPE 32oz
    Manufacturer: Dynalon
    Bottle WM Bulk w Caps, HDPE 32oz (55 per CS)
    Learn More
    was $326.83 Special Price $220.67
  16. Bottle WM Oblong, Grad HDPE 250mL
    Manufacturer: Dynalon
    Bottle WM Oblong, Grad HDPE 250mL (48 per CS)
    Learn More
    was $95.82 Special Price $64.70
  17. Bottle WM, HDPE 16oz
    Manufacturer: Dynalon
    Bottle WM, HDPE 16oz (48 per CS)
    Learn More
    was $291.72 Special Price $196.96
  18. Bottle WM Economy, HDPE 16oz
    Manufacturer: Dynalon
    These general purpose bottles are leak proof, and very economical. Closure is made of Polypropylene. Maximum temperature for HDPE 110°C and 121°C for PP closure. (48 per CS)
    Learn More
    was $211.35 Special Price $142.70
  19. Bottle Pourer, PTFE 30mm
    Manufacturer: Dynalon
    Bottle Pourer, PTFE 30mm (1 per EA)
    Learn More
    was $129.50 Special Price $87.43
  20. Bottle WM Graduated, PP 125mL
    Manufacturer: Dynalon
    Bottle WM Graduated, PP 125mL (12 per CS)
    Learn More
    was $67.25 Special Price $45.41
  21. Bottle w Long Spout, LDPE 50mL
    Manufacturer: Dynalon
    Bottle w Long Spout, LDPE 50mL (10 per PK)
    Learn More
    was $61.40 Special Price $41.45
  22. Bottle Dropping, LDPE 4oz
    Manufacturer: Dynalon
    Dropper bottles supplied in a range of convenient capacities from 60mL to 500mL. LDPE dropper bottles feature a sturdy white dropping cap. Dropper bottles supplied in a range of convenient capacities from 60mL to 500mL. LDPE dropper bottles feature a sturdy white dropping cap. (36 per CS)
    Learn More
    was $170.66 Special Price $115.24
  23. Washbottle GHS WM Ethanol, LDPE 500mL
    Manufacturer: Dynalon
    Washbottle GHS WM Ethanol, LDPE 500mL (5 per CS)
    Learn More
    was $63.86 Special Price $43.12
  24. Bottle NM Graduated, PE 500mL
    Manufacturer: Dynalon
    These opaque leakproof bottles are excellent for storing light sensitive materials, either liquid or solid. Body in Polyethylene (PE); cap in Polypropylene (PP). A LDPE neck insert plug provides maximum security. (25 per CS)
    Learn More
    was $135.34 Special Price $91.37
Filters
Set Descending Direction

363 items

Page
per page
View as List Grid