This category covers plastic bottles and jars for storing reagents, samples and solutions, from 2 mL sample cups and 8 mL Boston rounds to 5 L storage bottles and 4000 mL wide mouth jars. Materials include HDPE, LDPE, polypropylene, polystyrene and polycarbonate, in narrow mouth, wide mouth, Boston round, square and graduated styles, with natural and amber options. It also includes wash bottles pre-labeled for distilled or deionized water, acetone, ethanol, methanol and isopropanol, sterile polycarbonate storage bottles, samplers with graduated bottles, and precleaned jars with lined closures.

Match the plastic to the contents: HDPE and polypropylene resist most aqueous solutions, acids and bases, polypropylene can usually be autoclaved, and LDPE is soft enough for squeeze bottles. Choose narrow mouth bottles for pouring liquids and wide mouth jars for solids and easy filling. Use amber bottles for light-sensitive contents and sterile or precleaned containers where contamination matters, and check the closure size, liner and pack quantity before ordering.

Bottles and Jars, Plastic: common questions

How many ounces is a 1000 mL bottle?

1000 mL is one liter, or about 33.8 US fluid ounces, a little more than a quart (32 fl oz). Bottle capacities are usually nominal, meaning the bottle holds that amount with some headspace below the neck, so the brimful volume is somewhat larger. When a bottle is labeled in both units, the ounce figure may be rounded.

Which plastic should I choose for lab bottles?

It depends on the contents and how you will clean the bottle. HDPE is rigid and resists most acids, bases and aqueous solutions. Polypropylene has similar chemical resistance and can generally be autoclaved. LDPE is flexible, so it is used for wash and squeeze bottles. Polycarbonate is clear and strong but less resistant to some chemicals. For solvents, check a chemical compatibility chart.

Why are wash bottles labeled and color-coded?

Labeled wash bottles show what they contain, such as acetone, ethanol, methanol, isopropanol or distilled water, with color coding so bottles are not mixed up at the bench. That reduces the chance of rinsing with the wrong liquid or refilling a bottle with an incompatible one. Keep each bottle for the liquid printed on it.

What does precleaned mean for a sample jar?

A precleaned jar has been washed and packaged by the manufacturer so it can be used for sample collection without cleaning it in the lab first, which matters when trace contaminants could affect results, as in environmental testing. Cleaning standards differ between products, so check the product information or certificate to see what the container was cleaned and tested for.

Bottles and Jars, Plastic

Filters
Set Descending Direction

363 items

Page
per page
View as List Grid
  1. Bottle WM Bulk w Caps, HDPE 16oz
    Manufacturer: Dynalon
    Bottle WM Bulk w Caps, HDPE 16oz (100 per CS)
    Learn More
    was $415.26 Special Price $280.37
  2. Bottle WM Square, HDPE 1000mL
    Manufacturer: Dynalon
    Bottle WM Square, HDPE 1000mL (5 per CS)
    Learn More
    was $61.42 Special Price $41.48
  3. Washbottle WM Deionized, LDPE 500mL
    Manufacturer: Dynalon
    These high quality wash bottles are supplied in flexible natural polyethylene and are fitted with leak proof, wide neck polypropylene spout closures. The wide neck offers easy spill-free filling, and the acute angled, precision molded dispensing spout, ensures a consistent, downward pointing jet. (5 per CS)
    Learn More
    was $68.00 Special Price $45.92
  4. Bottle NM, LDPE 4oz
    Manufacturer: Dynalon
    This economy plastic bottle is supplied with polypropylene screw closures. Unbreakable, convenient design. For storage, packaging and other uses. Maximum temperature for LDPE is 80°C. (72 per CS)
    Learn More
    was $201.72 Special Price $136.19
  5. Bottle NM Bulk w Caps, HDPE 8oz
    Manufacturer: Dynalon
    Bottle NM Bulk w Caps, HDPE 8oz (180 per CS)
    Learn More
    was $440.35 Special Price $297.31
  6. Bottle Packaging WM HDPE 30ml
    Manufacturer: Dynalon
    Bottle Packaging WM HDPE 30ml (72 per CS )
    Learn More
    was $80.10 Special Price $54.09
  7. Bottle w Snap Cap, PET 100mL
    Manufacturer: Dynalon
    Bottle w Snap Cap, PET 100mL (50 per CS)
    Learn More
    was $339.43 Special Price $229.17
  8. Sealable Bottle WM w/ Cap, HDPE 2000mL
    Manufacturer: Dynalon
    Sturdy bottle with sealing eyelets on the screw cap and the bottle. Particularly suited for sending samples. SampleSafe seals (sold separately) provide increased sample authenticity. Easy to fill due to wide opening. Particularly suitable for viscous media, powder, granules and pastes. (10 per PK)
    Learn More
    was $223.80 Special Price $211.54
  9. Bottle Weighing, PP 360mL
    Manufacturer: Dynalon
    Bottle Weighing, PP 360mL (10 per PK)
    Learn More
    was $158.59 Special Price $128.49
  10. Bottle WM, PP 16oz
    Manufacturer: Dynalon
    Bottle WM, PP 16oz (48 per CS)
    Learn More
    was $344.02 Special Price $232.26
  11. Bottle NM, LDPE 8oz
    Manufacturer: Dynalon
    Bottle NM, LDPE 8oz (72 per CS)
    Learn More
    was $258.47 Special Price $174.51
  12. Bottle WM Economy, HDPE 32oz
    Manufacturer: Dynalon
    These general purpose bottles are leak proof, and very economical. Closure is made of Polypropylene. Maximum temperature for HDPE 110°C and 121°C for PP closure. (24 per CS)
    Learn More
    was $149.08 Special Price $100.65
  13. Bottle NM Bulk w Caps, HDPE 16oz
    Manufacturer: Dynalon
    Bottle NM Bulk w Caps, HDPE 16oz (100 per CS)
    Learn More
    was $336.39 Special Price $227.12
  14. Bottle Weighing, PP 50mL
    Manufacturer: Dynalon
    Bottle Weighing, PP 50mL (10 per PK)
    Learn More
    was $105.54 Special Price $85.51
  15. Bottle WM Bulk w Caps, PP 8oz
    Manufacturer: Dynalon
    Bottle WM Bulk w Caps, PP 8oz (180 per CS)
    Learn More
    was $618.72 Special Price $417.73
  16. Sealable Bottle WM w/ Cap, HDPE 1000mL
    Manufacturer: Dynalon
    Sturdy bottle with sealing eyelets on the screw cap and the bottle. Particularly suited for sending samples. SampleSafe seals (sold separately) provide increased sample authenticity. Easy to fill due to wide opening. Particularly suitable for viscous media, powder, granules and pastes. (10 per PK)
    Learn More
    was $194.75 Special Price $184.09
  17. Washbottle Sloped NM Water, LDPE 500mL
    Manufacturer: Dynalon
    These stylish sloped shoulder wash bottles are available with seven different printed labels. All are fitted with color coded polypropylene swivel/leak proof closures featuring an acute angled “swan neck” dispensing spout. (5 per CS)
    Learn More
    was $51.93 Special Price $35.07
  18. Bottle Dropping, LDPE 8oz
    Manufacturer: Dynalon
    Dropper bottles supplied in a range of convenient capacities from 60mL to 500mL. LDPE dropper bottles feature a sturdy white dropping cap. (24 per CS)
    Learn More
    was $158.80 Special Price $107.22
  19. Bottle WM, LDPE 32oz
    Manufacturer: Dynalon
    Bottle WM, LDPE 32oz (24 per CS)
    Learn More
    was $251.05 Special Price $169.50
  20. Bottle WM Square, HDPE 2L
    Manufacturer: Dynalon
    Choice of amber or natural graduated 2 liter HDPE rectangular bottles for space saving storage. Enhanced stability when in use with an ergonomic hand grip allowing for greater ease in pouring. Screw capped and graduated to 2000 mL. Mouth I.D. 75mm (6 per PK)
    Learn More
    was $104.52 Special Price $70.56
  21. Jar Round, HDPE w PP Cap 500mL
    Manufacturer: Dynalon
    Cylindrical HDPE jars are supplied with an insert and PP cap. Thanks to the large neck, these plastic container jars are suitable for powders and solid specimens. All sizes are supplied in a pack of 10 cylindrical jars. (10 per PK)
    Learn More
    was $54.62 Special Price $36.88
  22. Bottle NM, PP 64oz
    Manufacturer: Dynalon
    Bottle NM, PP 64oz (6 per CS)
    Learn More
    was $136.17 Special Price $91.95
  23. Jar Straight Side, PS 2oz 53mm
    Manufacturer: Dynalon
    Straight-Side Containers are all supplied with white polypropylene screw closures, these “glass-clear” polystyrene jars have many uses in the lab and industry. Lightweight and easy to fill. Maximum temperature polystyrene is 70°C. (48 per CS)
    Learn More
    was $115.17 Special Price $77.77
  24. Bottle NM, HDPE 64oz
    Manufacturer: Dynalon
    Bottle NM, HDPE 64oz (6 per CS)
    Learn More
    was $120.09 Special Price $81.08
Filters
Set Descending Direction

363 items

Page
per page
View as List Grid