This category covers plastic bottles and jars for storing reagents, samples and solutions, from 2 mL sample cups and 8 mL Boston rounds to 5 L storage bottles and 4000 mL wide mouth jars. Materials include HDPE, LDPE, polypropylene, polystyrene and polycarbonate, in narrow mouth, wide mouth, Boston round, square and graduated styles, with natural and amber options. It also includes wash bottles pre-labeled for distilled or deionized water, acetone, ethanol, methanol and isopropanol, sterile polycarbonate storage bottles, samplers with graduated bottles, and precleaned jars with lined closures.

Match the plastic to the contents: HDPE and polypropylene resist most aqueous solutions, acids and bases, polypropylene can usually be autoclaved, and LDPE is soft enough for squeeze bottles. Choose narrow mouth bottles for pouring liquids and wide mouth jars for solids and easy filling. Use amber bottles for light-sensitive contents and sterile or precleaned containers where contamination matters, and check the closure size, liner and pack quantity before ordering.

Bottles and Jars, Plastic: common questions

How many ounces is a 1000 mL bottle?

1000 mL is one liter, or about 33.8 US fluid ounces, a little more than a quart (32 fl oz). Bottle capacities are usually nominal, meaning the bottle holds that amount with some headspace below the neck, so the brimful volume is somewhat larger. When a bottle is labeled in both units, the ounce figure may be rounded.

Which plastic should I choose for lab bottles?

It depends on the contents and how you will clean the bottle. HDPE is rigid and resists most acids, bases and aqueous solutions. Polypropylene has similar chemical resistance and can generally be autoclaved. LDPE is flexible, so it is used for wash and squeeze bottles. Polycarbonate is clear and strong but less resistant to some chemicals. For solvents, check a chemical compatibility chart.

Why are wash bottles labeled and color-coded?

Labeled wash bottles show what they contain, such as acetone, ethanol, methanol, isopropanol or distilled water, with color coding so bottles are not mixed up at the bench. That reduces the chance of rinsing with the wrong liquid or refilling a bottle with an incompatible one. Keep each bottle for the liquid printed on it.

What does precleaned mean for a sample jar?

A precleaned jar has been washed and packaged by the manufacturer so it can be used for sample collection without cleaning it in the lab first, which matters when trace contaminants could affect results, as in environmental testing. Cleaning standards differ between products, so check the product information or certificate to see what the container was cleaned and tested for.

Bottles and Jars, Plastic

Filters
Set Descending Direction

363 items

Page
per page
View as List Grid
  1. Jar Round, HDPE w PP Cap 70mL
    Manufacturer: Dynalon
    Jar Round, HDPE w PP Cap 70mL (10 per PK)
    Learn More
    was $37.86 Special Price $25.56
  2. Stopcock, Angled 0.75in Thread
    Manufacturer: Dynalon
    Stopcock, Angled 0.75" Thread (1 per EA)
    Learn More
    was $68.03 Special Price $64.31
  3. Washbottle, 2 Tubes, LDPE 250 mL
    Manufacturer: Dynalon
    Washbottle, 2 Tubes, LDPE 250 mL (10 per PK )
    Learn More
    was $64.78 Special Price $52.48
  4. Bottle Packaging WM HDPE 8ml
    Manufacturer: Dynalon
    Bottle Packaging WM HDPE 8ml (72 per CS )
    Learn More
    was $48.07 Special Price $32.46
  5. Bottle Round PP NM Closure, LDPE 500mL
    Manufacturer: Dynalon
    Kartell graduated plastic Plug Seal Bottle comes in a choice of wide or narrow neck and will withstand considerable pressure. Secured by tagging points on bottle and cap. Confidential notes can be placed in the space between insert sealing plug and cap. (5 per PK)
    Learn More
    was $28.48 Special Price $19.24
  6. Bottle Round PP WM Closure, LDPE 1000mL
    Manufacturer: Dynalon
    Kartell graduated plastic Plug Seal Bottle comes in a choice of wide or narrow neck and will withstand considerable pressure. Secured by tagging points on bottle and cap. (5 per PK)
    Learn More
    was $46.61 Special Price $31.48
  7. Washbottle GHS WM DCM, LDPE/PPCLSR 500ml
    Manufacturer: Dynalon
    Washbottle GHS WM DCM, LDPE/PPCLSR 500ml (5 per CS)
    Learn More
    was $69.48 Special Price $46.91
  8. Pipettor Pi-Pump Blue, PP 2mL
    Manufacturer: Dynalon
    Many years of trouble-free use have made the pi-pump® one of the world’s most popular pipetting aids. Accurate, precise and safe—even for use with toxic or corrosive chemicals. (12 per CS)
    Learn More
    was $474.72 Special Price $320.51
  9. Washbottle WM Blue Cap, LDPE 250 mL
    Manufacturer: Dynalon
    Plastic wash bottles are supplied in flexible natural polyethylene and are fitted with a range of color coded leak proof, wide neck polypropylene spout closures. (5 per CS)
    Learn More
    was $44.05 Special Price $29.75
  10. Bottle Round PP WM Closure, LDPE 250mL
    Manufacturer: Dynalon
    Kartell graduated plastic Plug Seal Bottle comes in a choice of wide or narrow neck and will withstand considerable pressure. Secured by tagging points on bottle and cap. (10 per PK)
    Learn More
    was $48.03 Special Price $32.43
  11. Bottle Spouted, LDPE 60mL
    Manufacturer: Dynalon
    The white polyethylene screw cap on the 30 and 60mL Azlon Dropper Cap Bottles has a pivoting nozzle which can be raised to give a direct jet of liquid as the bottle is squeezed. When the nozzle is closed on the dropper caps the passage for liquid is shut off to give an airtight seal at normal pressure, although when the nozzle is partly open it makes an excellent dropping device. (10 per CS)
    Learn More
    was $21.73 Special Price $14.68
  12. Bottle NM, PP 8oz
    Manufacturer: Dynalon
    Bottle NM, PP 8oz (72 per CS)
    Learn More
    was $275.74 Special Price $186.17
  13. Bottle wTamper Evident Cls , HDPE 50mL
    Manufacturer: Dynalon
    Bottle wTamper Evident Cls , HDPE 50mL (100 per CS)
    Learn More
    was $259.11 Special Price $174.94
  14. Bottle NM, HDPE 1oz
    Manufacturer: Dynalon
    Bottle NM, HDPE 1oz (72 per CS)
    Learn More
    was $133.25 Special Price $89.96
  15. Bottle Dropping, LDPE 6oz
    Manufacturer: Dynalon
    Dropper bottles supplied in a range of convenient capacities from 60mL to 500mL. LDPE dropper bottles feature a sturdy white dropping cap. Dropper bottles supplied in a range of convenient capacities from 60mL to 500mL. LDPE dropper bottles feature a sturdy white dropping cap. Dropper bottles supplied in a range of convenient capacities from 60mL to 500mL. LDPE dropper bottles feature a sturdy white dropping cap. (36 per CS)
    Learn More
    was $195.56 Special Price $132.04
  16. Bottle wTamper Evident Cls , HDPE 250mL
    Manufacturer: Dynalon
    Bottle wTamper Evident Cls , HDPE 250mL (50 per CS)
    Learn More
    was $213.54 Special Price $144.19
  17. Washbottle GHS WM Acetone, LDPE 250mL
    Manufacturer: Dynalon
    Washbottle GHS WM Acetone, LDPE 250mL (5 per CS)
    Learn More
    was $61.32 Special Price $41.40
  18. Bottle WM, PTFE 10mL
    Manufacturer: Dynalon
    Bottle WM, PTFE 10mL (1 per EA)
    Learn More
    was $76.68 Special Price $62.12
  19. Bottle Disp/Sealer, LDPE 2oz
    Manufacturer: Dynalon
    Wide array of low density polyethylene bottles are supplied with a variety of closures to suit any dispensing application. Sealer cap bottles supplied in capacities from 15 to 500 mL with dropping caps, ribbon spread caps and bellows all supplied in more limited sizes. (48 per CS)
    Learn More
    was $98.34 Special Price $66.39
  20. Bottle Tall Jug, Tamper Ev HDPE 32oz
    Manufacturer: Dynalon
    Bottle Tall Jug, Tamper Ev HDPE 32oz (12 per DZ)
    Learn More
    was $24.89 Special Price $20.16
  21. Bottle NM Amber, HDPE 32oz
    Manufacturer: Dynalon
    Bottle NM Amber, HDPE 32oz (24 per CS)
    Learn More
    was $248.21 Special Price $167.59
  22. Bottle NM Bulk w Caps, HDPE 1oz
    Manufacturer: Dynalon
    Bottle NM Bulk w Caps, HDPE 1oz (1200 per CS)
    Learn More
    was $1,679.37 Special Price $1,133.83
  23. Bottle WM, HDPE 64oz
    Manufacturer: Dynalon
    Bottle WM, HDPE 64oz (6 per CS)
    Learn More
    was $125.48 Special Price $84.72
  24. Jar White, PP 0.5oz
    Manufacturer: Dynalon
    Plastic containers are molded of white opaque polypropylene, lightweight containers are not considered leak-proof. Many laboratory and industrial uses. Supplied with polypropylene screw closures. Maximum temperature PP is 121°C. (144 per CS)
    Learn More
    was $160.37 Special Price $108.28
Filters
Set Descending Direction

363 items

Page
per page
View as List Grid