This category covers plastic bottles and jars for storing reagents, samples and solutions, from 2 mL sample cups and 8 mL Boston rounds to 5 L storage bottles and 4000 mL wide mouth jars. Materials include HDPE, LDPE, polypropylene, polystyrene and polycarbonate, in narrow mouth, wide mouth, Boston round, square and graduated styles, with natural and amber options. It also includes wash bottles pre-labeled for distilled or deionized water, acetone, ethanol, methanol and isopropanol, sterile polycarbonate storage bottles, samplers with graduated bottles, and precleaned jars with lined closures.

Match the plastic to the contents: HDPE and polypropylene resist most aqueous solutions, acids and bases, polypropylene can usually be autoclaved, and LDPE is soft enough for squeeze bottles. Choose narrow mouth bottles for pouring liquids and wide mouth jars for solids and easy filling. Use amber bottles for light-sensitive contents and sterile or precleaned containers where contamination matters, and check the closure size, liner and pack quantity before ordering.

Bottles and Jars, Plastic: common questions

How many ounces is a 1000 mL bottle?

1000 mL is one liter, or about 33.8 US fluid ounces, a little more than a quart (32 fl oz). Bottle capacities are usually nominal, meaning the bottle holds that amount with some headspace below the neck, so the brimful volume is somewhat larger. When a bottle is labeled in both units, the ounce figure may be rounded.

Which plastic should I choose for lab bottles?

It depends on the contents and how you will clean the bottle. HDPE is rigid and resists most acids, bases and aqueous solutions. Polypropylene has similar chemical resistance and can generally be autoclaved. LDPE is flexible, so it is used for wash and squeeze bottles. Polycarbonate is clear and strong but less resistant to some chemicals. For solvents, check a chemical compatibility chart.

Why are wash bottles labeled and color-coded?

Labeled wash bottles show what they contain, such as acetone, ethanol, methanol, isopropanol or distilled water, with color coding so bottles are not mixed up at the bench. That reduces the chance of rinsing with the wrong liquid or refilling a bottle with an incompatible one. Keep each bottle for the liquid printed on it.

What does precleaned mean for a sample jar?

A precleaned jar has been washed and packaged by the manufacturer so it can be used for sample collection without cleaning it in the lab first, which matters when trace contaminants could affect results, as in environmental testing. Cleaning standards differ between products, so check the product information or certificate to see what the container was cleaned and tested for.

Bottles and Jars, Plastic

Filters
Set Descending Direction

363 items

Page
per page
View as List Grid
  1. Bottle WM Amber Square, HDPE 2L
    Manufacturer: Dynalon
    Bottle WM Amber Square, HDPE 2L (6 per PK)
    Learn More
    was $109.60 Special Price $74.00
  2. Bottle Faucet for 405644, HDPE
    Manufacturer: Dynalon
    This rectangular HDPE bottle conveniently stores or dispenses 5 liters of liquid. Supplied with a standard closure, however the 38mm opening can also be secured with a dispensing faucet. (12 per CS)
    Learn More
    was $100.45 Special Price $81.39
  3. Bottle NM, PP 1oz
    Manufacturer: Dynalon
    Bottle NM, PP 1oz (72 per CS)
    Learn More
    was $151.66 Special Price $102.40
  4. Washbottle WM Red Cap, LDPE 250 mL
    Manufacturer: Dynalon
    Plastic wash bottles are supplied in flexible natural polyethylene and are fitted with a range of color coded leak proof, wide neck polypropylene spout closures. (5 per CS)
    Learn More
    was $46.26 Special Price $31.24
  5. Bottle NM Graduated, PE 50mL
    Manufacturer: Dynalon
    Bottle NM Graduated, PE 50mL (50 per CS)
    Learn More
    was $131.11 Special Price $88.52
  6. Washbottle Integ GHS Distilled, LDPE 500
    Manufacturer: Dynalon
    Azlon® round integral wash bottles are molded with an integral spout so you can say goodbye to the contamination caused by the inner tube touches the benchtop during re-filling... reducing contamination! (5 per CS)
    Learn More
    was $61.26 Special Price $41.37
  7. Washbottle, Integral LDPE 500mL
    Manufacturer: Dynalon
    Easy-squeeze integral wash bottles with integrally molded tube. Integral wash bottle requires only gentle pressure to eject and accurately direct the liquid. The dispensing tip can be cut back to increase the flow rate. Maximum temperature of LDPE is 80°C. (24 per CS)
    Learn More
    was $238.26 Special Price $160.86
  8. Washbottle WM White Cap, LDPE 1000mL
    Manufacturer: Dynalon
    These high quality wide mouth plastic wash bottles are supplied in flexible natural polyethylene and are fitted with a range of color coded leak proof, wide neck polypropylene spout closures. (5 per CS)
    Learn More
    was $60.77 Special Price $41.03
  9. Washbottle Needle Spray, LDPE 1000 mL
    Manufacturer: Dynalon
    Washbottle Needle Spray, LDPE 1000 mL (10 per PK )
    Learn More
    was $94.67 Special Price $76.70
  10. Washbottle WM Yellow Cap, LDPE 1000mL
    Manufacturer: Dynalon
    These high quality wide mouth plastic wash bottles are supplied in flexible natural polyethylene and are fitted with a range of color coded leak proof, wide neck polypropylene spout closures. (5 per CS)
    Learn More
    was $53.86 Special Price $36.37
  11. Bottle NM, LDPE 16oz
    Manufacturer: Dynalon
    Bottle NM, LDPE 16oz (48 per CS)
    Learn More
    was $232.68 Special Price $157.10
  12. Washbottle WM Red Cap, LDPE 500mL
    Manufacturer: Dynalon
    These high quality wide mouth plastic wash bottles are supplied in flexible natural polyethylene and are fitted with a range of color coded leak proof, wide neck polypropylene spout closures. (5 per CS)
    Learn More
    was $51.67 Special Price $34.89
  13. Bottle Adj Vol Disp, LDPE/PMP 250mL 5-25
    Manufacturer: Dynalon
    Bottle Adj Vol Disp, LDPE/PMP 250mL 5-25 (10 per CS)
    Learn More
    was $228.17 Special Price $154.06
  14. Bottle WM Amber, PP 32oz
    Manufacturer: Dynalon
    Bottle WM Amber, PP 32oz (25 per CS)
    Learn More
    was $334.55 Special Price $225.88
  15. Washbottle NM White Cap, LDPE 500mL
    Manufacturer: Dynalon
    Azlon Red Narrow Neck Wash Bottles: Traditional style 500mL wash bottles in red with matching closures. Narrow mouth wash b (5 per CS)
    Learn More
    was $39.61 Special Price $26.74
  16. Bottle WM Bulk w Caps, PP 4oz
    Manufacturer: Dynalon
    Bottle WM Bulk w Caps, PP 4oz (350 per CS)
    Learn More
    was $862.97 Special Price $582.65
  17. Bottle Packaging WM Amber HDPE 500ml
    Manufacturer: Dynalon
    Bottle Packaging WM Amber HDPE 500ml (48 per CS )
    Learn More
    was $208.25 Special Price $140.61
  18. Bottle Packaging WM Amber HDPE 1000ml
    Manufacturer: Dynalon
    Bottle Packaging WM Amber HDPE 1000ml (24 per CS )
    Learn More
    was $181.55 Special Price $122.59
  19. Bottle Large NM, LDPE 1/2gal
    Manufacturer: Dynalon
    Bottle Large NM, LDPE 1/2gal (6 per CS)
    Learn More
    was $314.15 Special Price $296.94
  20. Bottle NM Bulk w Caps, LDPE 4oz
    Manufacturer: Dynalon
    Bottle NM Bulk w Caps, LDPE 4oz (350 per CS)
    Learn More
    was $660.92 Special Price $446.22
  21. Jar White, PP 2oz
    Manufacturer: Dynalon
    Plastic containers are molded of white opaque polypropylene, lightweight containers are not considered leak-proof. Many laboratory and industrial uses. Supplied with polypropylene screw closures. Maximum temperature PP is 121°C. (72 per CS)
    Learn More
    was $112.57 Special Price $76.01
  22. Bottle Graduated WM, PP 500mL
    Manufacturer: Dynalon
    Translucent, rigid polypropylene bottles are autoclavable and can withstand temperatures up to 135°C. Specially designed closure provides leakproof seal and has hole for tagging. FDA compliant for food and beverage. (50 per CS)
    Learn More
    was $505.02 Special Price $340.97
  23. Bottle Disp/Sealer, LDPE 1oz
    Manufacturer: Dynalon
    Wide array of low density polyethylene bottles are supplied with a variety of closures to suit any dispensing application. Sealer cap bottles supplied in capacities from 15 to 500 mL with dropping caps, ribbon spread caps and bellows all supplied in more limited sizes. (48 per CS)
    Learn More
    was $83.87 Special Price $56.63
  24. Bottle WM Bulk w Caps, PP 1oz
    Manufacturer: Dynalon
    Bottle WM Bulk w Caps, PP 1oz (1200 per CS)
    Learn More
    was $1,858.95 Special Price $1,255.09
Filters
Set Descending Direction

363 items

Page
per page
View as List Grid