Supplies

HardyDisk™ Ceftolozane/Tazobactam, 40µg (C/T40), Zerbaxa, 5 x 50 disks, by Hardy Diagnostics HardyDisk™ AST's are impregnated paper disks used for Antimicrobial Susceptibility Testing (AST) also known as disk diffusion or Kirby-Bauer testing. Each cartridge contains 50 disks that are spring loaded for smooth and reliable dispensing. Hardy Diagnostics offers a complete line of all commonly used antibiotics. Available in single cartridges (Z9341) or packs of five (Z9345). Compatible with the BBL dispensers. Improved cartridge design helps to prevent jamming and tearing. HardyDisk™ AST cartridges are packaged in an all new canister that features a desiccant built into the lid. Kirby-Bauer accessories available: Mueller Hinton Agar, McFarland Standard, calipers, and much more! Spring loaded in cartridges of 50 disks for smooth and reliable dispensing The last disk in each cartridge is clearly marked with dark lines around its edge to signify the need for refill For use with with single dispenser catalog number 260457 (not included) or 12 place dispenser catalog number 260640 (not included). FDA cleared. (1 per EA)

The Oxoid Salmonella Test Kit is a rapid latex agglutination test for the presumptive identification of Salmonella in selective and/or enrichment cultures. The use of latex technology makes this test more sensitive than direct agglutination methods, so that use of the Oxoid Salmonella Test Kit permits identification of Salmonella at least 24 hours earlier than when using conventional techniques. The Oxoid Salmonella Test Kit is particularly suited to screening cultures due to the high predictive value of a negative result. When screening clinical specimens, these features enable decisions on appropriate patient management to be taken sooner. The kit is also ideal for screening samples in the food industry where prompt results minimize the delay associated with routine testing for Salmonella contamination Comparable to: Remel R30858302 (1 per EA)

These colorful snap-on closures are an effective way to recap blood drawing tubes, glass test tubes and plastic culture tubes. They are precision molded from low-density polyethylene (LDPE) and maintain a tight seal during centrifugation, agitation and refrigeration procedures. They are available in bright translucent colors for sample identification purposes. The caps feature a single thumb tab for easy removal and close nesting in tube racks. (1000 per PK)

Shelf Life (months): , , UN Number: UN2672 (1 per EA)

Transfer Pipet, 5ml Large Bulb sterile, 20/pk, PK500 (500 per PK )

Shelf Life (months): 60, , UN Number: (1 per EA)

HemaPRO Stain Kit, 125 Test for HP1 (1 per EA)

Filter Flask 1L flask is compatible with the ULTRA-WARE Funnel/Support Assembly 47mm Stainless Steel Support (KT953805-0000). Also for use with Millipore filtering manifolds. (1 per EA)

Acetonitrile, Exceeds A.C.S. Specifications, HPLC Grade as a polar aprotic solvent in organic synthesis, as well as a carrier (mobile phase) solvent in high pressure liquid chromatography (HPLC). Acetonitrile is a medium-polarity solvent with a convenient liquid range that is miscible with water and makes it one of the most popular HPLC solvent choices.

All HPLC and Ultra-pure solvents offered by Spectrum are glass distilled, submicron filtered, and undergo rigorous specification testing to insure accurate, repeatable results.

(4 per CS )

Petri Dish, 60 X 15, Mono Slippable, 20 Dishes/Sleeve, CS500 (500 per CS )

Autofil® Sterile Disposable Bottle Top Vacuum Filter Units with 0.2um Sterilizing PES Membrane, 250mL, 12/CS (12 per CS )

MTC Bio serological pipettes are made from virgin polystyrene in a class 100,000 clean room facility, under ISO 13485. Available in six volumes (1, 2, 5, 10, 25, 50ml), they are sterilized via E-beam and individually packaged in paper/plastic pouches. All sizes have vivid black, positive and negative graduations and are color coded for easy volume identification. • Sterile, individually wrapped • Ascending & descending graduations • Cotton plugged • Standardized color coding • Paper/plastic packaging (150 per CS )

PVC Pump Tubing, 455mm, 150mm 2-Bridge, Orange/Green, PK12 (12 per PK)

Chloroform, Stabilized, Reagent, ACS, is a colorless, sweet smelling organic compound comes in the form of a dense liquid and is a trihalomethane. It is also commonly used as laboratory solvent because it is relatively unreactive, conveniently volatile and is miscible with most organic compounds. Although it uses as a reagent are limited, it is used in organic synthesis in order to produce dichlorocarbene by reacting with sodium hydroxide. As an ACS grade Reagent, Spectrum Chemical manufactured chloroform is used as the quality standard against which other substances are graded and has met the toughest regulatory standards for quality and pureness.

(4 per CS )

16oz. pH Calibration Buffer Solution Kit (pH 4.00, 7.00 & 10.01), 4oz. storage solution for pH/ORP Electrodes, plus Apera’s CalBox for easy calibration High Accuracy (±0.01 pH): standardized against NIST certified pH references within 0.01 pH at 25°C (77° (1 per EA )

The raw materials, premium polypropylene (PP)/polyethylene (HDPE), have excellent physical and chemical indicators and very good pressure-resistance, impact-resistance and acid and alkali resistance. PP materials can undergo autoclave sterilization at 121 ; HDPE can be stored at -80 . A full range of choices to meet different packaging and storage requirements. Washing-free, no need for tedious pre-cleaning processing work, ready to use, greatly improves the packaging effect of users. Thickened middle packaging to ensure transportation and storage safety. Use of professional leaking-proof design for bottle mouth, with no need for inner cover or inner gasket for protection, excellent sealability. Guarantee of being 100% leaking-proof to ensure safety even during air transportation; wide-mouthed design for easy access of liquid. No biotoxicity, pyrogen-free, DNAse/RNAse-free, manufactured in a 100-thousand grade clean plant. The sterile plastic bottles are sterilized using GAMMA-ray. Introduction of imported digital-controlled production equipment with high precision; the products have fine details and comfortable touch, the body walls of which are even with high gloss, with no color difference; high uniformity between different batches. With respect to the process, high-class molding technologies and surface processing technologies are used, leading to smooth interior and exterior surfaces of the plastic bottles without wicking effect of reagents, subsequently significantly reducing sample wastage; the products have high interchangeability with imported ones, can be used to replace the imported ones. (800 per CS )

PYR Test Kit, with 15ml chromogenic solution and test cards, 25 cards that have 3 tests per card, total of 75 tests per kit, by Hardy Diagnostics Hardy Diagnostics PYR Test Kit and PYR Reagent are recommended for the detection of pyrolidonyl arylamidase (also called pyrolidonyl aminopeptidase) activity in certain groups of bacteria, such as Streptococcus pyogenes (group A strep), Enterococcus spp., some coagulase-negative staphylococci, and some Enterobacteriaceae. The card format is easier to handle than disks. Three tests can be performed on one card. The Hardy Diagnostics manufacturing facility and quality management system comply with the FDA's Good Manufacturing Practices (GMP) and have achieved ISO 13485 certification as a medical device manufacturer. Quality is a science...Service is an art. At Hardy Diagnostics, we believe in excellence in patient care...just like you do! Comparable to: BD 231747 (1 per EA)

5mL MacroTube, sterile, ten bags of 20 tubes, 200/pk (200 per PK )

Alcohol, Denatured, 190 Proof is ethanol that has added additives that render it undrinkable, bad smelling, bad tasting or even poisonous to discourage people from consuming it. The additives do not chemically change the alcohol and thus it is identical to a normal alcohol apart from it's smell, color and taste and can be used for the exact same purposes as normal alcohol.

(1 per EA )

Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Polystyrene is optically clear for easy cell viewing and imaging Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination Plates are labeled with alpha-numeric markings for easy identification of individual wells Lids have a stacking feature for added stability when handling tall stacks of plates Round bottom option maximizes sample retrieval and allows mixing (PN 229190) Plate is printed with lot number and expiration date for easy identification and tracking Sturdy individual blister pack prevents damage when handling or shipping Bulk packaging option (5/sleeve) increases efficiency for high volume users (PN 229197) (100 per CS)

Flasks Filtration Flask Flask 2000 mL #8 Rubber Stopper Joint #2 Hose Connection This flask is manufactured from heavy wall borosilicate glass to assure the mechanical strength needed for vacuum filtration. The side arm accepts standard 1/4 (6 mm) I.D. tubing for connection to vacuum sources. (1 per EA)

Screw cap tube, 15 ml, 120 x 17 mm, conical base, polypropylene, 2-color printed graduations and writing space, red cap assembled, sterile, non-pyrogenic/endotoxin-free, non-cytotoxic, 50 pcs./Styrofoam rack (500 per CS )

PVC Pump Tubing, 455mm, 150mm 2-Bridge, Purple/Black, PK12 (12 per PK )

CODE: 200-R-F-S-L (960 per PK)