Supplies

Resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF). (1000 per CS )

Patented Closed System Prevents Exposure to Sample AerosolsBMP Tissue Grinders are engineered for safety and ease of use. The patented closed system design provides the ability to grind the specimen in a sealed container helping to prevent any risk of contact with the sample. The narrow pestle eliminates the problem of sample overflow common with other tissue grinders. The molded-in abrasive surface does not leave any sediment to obstruct the sample during examination. BMP Tissue Grinders come fully assembled and gamma sterilized in an easy-to-open Tyvek® (Tyvek® is a registered trademark of DuPont) package. An extra cap and patient identification label are provided for storage, transport, and traceability. (10 per CS )

Resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF). (500 per CS )

Resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF). (1000 per CS )

These high quality non-graduated containers are designed for the collection, transport, and storage of specimens and samples. Tight fitting lids prevent leaks and odors. Ideal for storing biologically hazardous samples for terminal autoclaving before disposal. Molded from either high-density polyethylene or polypropylene, these containers are inert to most chemicals including formaldehyde, weak acids, and all bases. The stackable containers are resistant to freezing and boiling and are easy to write on with either pen or pencil for positive identification. (25 per CS )

Resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF). (36 per CS )

These high quality non-graduated containers are designed for the collection, transport, and storage of specimens and samples. Tight fitting lids prevent leaks and odors. Ideal for storing biologically hazardous samples for terminal autoclaving before disposal. Molded from either high-density polyethylene or polypropylene, these containers are inert to most chemicals including formaldehyde, weak acids, and all bases. The stackable containers are resistant to freezing and boiling and are easy to write on with either pen or pencil for positive identification. (100 per CS )

These high quality non-graduated containers are designed for the collection, transport, and storage of specimens and samples. Tight fitting lids prevent leaks and odors. Ideal for storing biologically hazardous samples for terminal autoclaving before disposal. Molded from either high-density polyethylene or polypropylene, these containers are inert to most chemicals including formaldehyde, weak acids, and all bases. The stackable containers are resistant to freezing and boiling and are easy to write on with either pen or pencil for positive identification. (10 per CS )

These high quality non-graduated containers are designed for the collection, transport, and storage of specimens and samples. Tight fitting lids prevent leaks and odors. Ideal for storing biologically hazardous samples for terminal autoclaving before disposal. Molded from either high-density polyethylene or polypropylene, these containers are inert to most chemicals including formaldehyde, weak acids, and all bases. The stackable containers are resistant to freezing and boiling and are easy to write on with either pen or pencil for positive identification. (100 per CS )

Resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF). (1000 per CS )

The Hemodrop blood dispenser is designed for the safe and easy dispensing of a single drop of blood from any style of specimen tube without removing the cap. By eliminating the need to remove the cap, the introduction of airborne pathogens is minimized. (100 per CS )

Patented Closed System Prevents Exposure to Sample AerosolsBMP Tissue Grinders are engineered for safety and ease of use. The patented closed system design provides the ability to grind the specimen in a sealed container helping to prevent any risk of contact with the sample. The narrow pestle eliminates the problem of sample overflow common with other tissue grinders. The molded-in abrasive surface does not leave any sediment to obstruct the sample during examination. BMP Tissue Grinders come fully assembled and gamma sterilized in an easy-to-open Tyvek® (Tyvek® is a registered trademark of DuPont) package. An extra cap and patient identification label are provided for storage, transport, and traceability. (10 per CS )

Patented Closed System Prevents Exposure to Sample AerosolsBMP Tissue Grinders are engineered for safety and ease of use. The patented closed system design provides the ability to grind the specimen in a sealed container helping to prevent any risk of contact with the sample. The narrow pestle eliminates the problem of sample overflow common with other tissue grinders. The molded-in abrasive surface does not leave any sediment to obstruct the sample during examination. BMP Tissue Grinders come fully assembled and gamma sterilized in an easy-to-open Tyvek® (Tyvek® is a registered trademark of DuPont) package. An extra cap and patient identification label are provided for storage, transport, and traceability. (10 per CS )

We are proud to introduce a disposable plastic clip which is designed as a replacement for metal clips. As with the metal clips, the plastic clips hold the cytology funnels snuggly against the microscope slide during the centrifugation process. The plastic clips are disposable and eliminate the time and labor required to sanitize the metal clips after each use. For sample volumes of up to 0.4 mL or less Provides consistent and homogeneous cell deposition area of 6 mm White Filter Card is pre-attached and is designed for single use only Funnel sealing caps included All products sold in case quantities only (500 per CS )

Available with standard caps for low-speed work and sealing caps for high-speed applications-sealing caps have a built-in gripper to facilitate removal from the rotor Extra thick walls for durability-resistant to most chemicals Wide mouth design makes filling and decanting easier These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. Bottles with standard caps provide reliable performance up to 8250 xg in swinging bucket and fixed angle rotors. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration. (24 per CS )

Available with standard caps for low-speed work and sealing caps for high-speed applications-sealing caps have a built-in gripper to facilitate removal from the rotor Extra thick walls for durability-resistant to most chemicals Wide mouth design makes filling and decanting easier These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. Bottles with standard caps provide reliable performance up to 8250 xg in swinging bucket and fixed angle rotors. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration. (24 per CS )

For sample volumes of up to 0.4 mL or less Provides consistent and homogeneous cell deposition area of 6 mm. White Filter Card is pre-attached and is designed for single use only. Funnel sealing caps included. All products sold in case quantities only (500 per CS )

Resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF). (500 per CS )

Available with standard caps for low-speed work and sealing caps for high-speed applications-sealing caps have a built-in gripper to facilitate removal from the rotor Extra thick walls for durability-resistant to most chemicals Wide mouth design makes filling and decanting easier These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. Bottles with standard caps provide reliable performance up to 8250 xg in swinging bucket and fixed angle rotors. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration. (36 per CS )

Resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF). (1000 per CS )

Vitrified, Silica Cast Pestle Tips Provide Enhanced Grinding Capability for Difficult SamplesThe pestle tips of the new BMP Ultra Tissue Grinders have been vitrified using a proprietary silica casting process. The result is a glass-like abrasive surface which provides a more aggressive grinding action to enable efficient processing of difficult and fibrous samples. BMP Ultra Tissue Grinders incorporate the same patented closed system as our standard grinders. Available in 15 mL and 50 mL sizes, they are supplied gamma sterilized in an easy-to-open Tyvek® (Tyvek® is a registered trademark of DuPont) package with an extra cap for storage and transport plus a patient identification label for traceability. (10 per CS )

Resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF). (1000 per CS )

Vitrified, Silica Cast Pestle Tips Provide Enhanced Grinding Capability for Difficult SamplesThe pestle tips of the new BMP Ultra Tissue Grinders have been vitrified using a proprietary silica casting process. The result is a glass-like abrasive surface which provides a more aggressive grinding action to enable efficient processing of difficult and fibrous samples. BMP Ultra Tissue Grinders incorporate the same patented closed system as our standard grinders. Available in 15 mL and 50 mL sizes, they are supplied gamma sterilized in an easy-to-open Tyvek® (Tyvek® is a registered trademark of DuPont) package with an extra cap for storage and transport plus a patient identification label for traceability. (10 per CS )

Available with standard caps for low-speed work and sealing caps for high-speed applications-sealing caps have a built-in gripper to facilitate removal from the rotor Extra thick walls for durability-resistant to most chemicals Wide mouth design makes filling and decanting easier These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. Bottles with standard caps provide reliable performance up to 8250 xg in swinging bucket and fixed angle rotors. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration. (24 per CS )