Supplies

Silicone sealing mats are made of research-grade silicone. They are chemically resistant and contain no adhesives or extractables to contaminate samples. Suitable for sealing storage and micro-plates, silicone mats provide sample protection while minimizing evaporation in a wide range of temperatures in incubation and storage applications. Silicone mats are especially good for sample processing or storage at higher temperatures or for applications involving aggressive solvents. Mats are suitable for high-throughput or other demanding applications involving accessing the sample through the cover multiple times. Each well has a perforation over every well that is cut 80% of the way through (but not all of the way). This allows sample access via pipettor, syringe, or probe. These scored perforations are designed to easily open to minimize coring and will seal themselves, after penetration, ensuring an airtight closure to the well. Made of research-grade silicone Perforated wells for easy sample access Re-sealable perforations Resists coring and tearing Eliminates cross-talk between wells Suitable for high-temperature storage Mats can be reused For use with assay and storage plates Mats can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. (50 per CS )

300ul 96-Round well, U-bottom, Natural; 10 plates/pack, 10 packs/case CS100 (100 per CS )

Silicone Sealing Mat, 384-well, Round for PCR, Printed Alpha-numerics; 10 Mats/Bag, 5 Bags/Case CS 50 (50 per CS )

Capper, decapper, and film spreader tool, 1 ea. EA1 (1 per EA )

Injection molded silicone sealing mats with 8.2 x 8.2mm square plugs, are designed for 96-well storage and assay plates. Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. Mats have slightly longer plugs eliminating dead-space, and each plug has a molded in O-ring to aid in the prevention of sample loss in storage, evaporation of VOCs, and reducing the risk of aerosols and pathogens venting during the automation process. They work in a wide range of temperatures for incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents. These seals pare well with automation as-well-as manual laboratory protocols. Often used in high-throughput applications or those involving accessing the sample through the cover multiple times. High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. Well perforations are X shaped, and will seal themselves, after penetration, ensuring an airtight closure. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. Molded in alpha numeric grid for easy reference. (100 per CS )

Developed for large sample storage and analysis, these 4.6mL plates feature raised rims for optimized sealing, thin walls to maximize well volume, and a unique elongated bottom trough – designed to act as a reservoir for samples and sample particulate. This plate is ideal for large volume samples and is often used in combinatorial chemistry, environmental, and food testing. Its ANSI/SLAS 1-2004 compliant footprint ensures that it will fit all standard fixtures, stackers, and heater/cooler blocks. Manufactured from inert medical grade virgin polypropylene resins are ideally suited for stable, long term high-density sample storage at -80C. Certified to be free of RNase, DNase, and Pyrogen contamination. (100 per CS )

40ul 384-well PCR 2-notch plt, PP White, 10 plts/ut. 5 uts/cs (500 per CS )

450ul 96-well Plate, Clear, Round well, V-bottom, Sterile; 10 plates/pack, 10 packs/case CS 100 (100 per CS )

2.2ul 96-well Plate, Clear, Square Well, V-bottom; 5 plates/pack, 10 packs/case CS 50 (50 per CS )

Deep Well Plates 700ul 96-well, Clear, Round well, Conical V-bottom, 5 plates/pack, 10 packs/case CS10 (50 per CS )

Our 10.0mL 24-well plate is ideal for growing bacterial cultures and for sample purification with magnetic beads utilizing manual and automated systems. The unique square top with round bottom design allows for optimum mixing and enhanced recovery of magnetic beads. Separated round well bottoms allow for the use of post or ring style magnetic plates. Automation compliant footprint and rigid construction allow for use on automation platforms with most robotic grippers. Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films. Made from Virgin Polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free. (50 per CS )

450ul 96-well Plate, Clear, Round well, V-bottom; 10 plates/pack, 10 packs/case CS 100 (100 per CS )

2.2ul 96-well Plate, Clear, Square Well, V-bottom, Sterile; 5 plates/pack, 10 packs/case CS 50 (50 per CS )

Half-skirt low profile, 96-well 0.1mL PCR plate works equally well for manual or automated protocols. The half skirt plate is a very rigid design, providing convenient barcoding areas and automation compatibility. Ultra-flat surfaces, large sidewall area, and rigidity optimize this plate for consistent automated handling with most robotic systems. Plate is easily oriented with corner notch and molded in alpha-numeric. Its ANSI/SLAS 1-2004 compliant footprint ensures that it will fit all standard fixtures, stackers, and other SBS compliant equipment. Plates are manufactured of low extractable, optically clear, virgin, medical grade polypropylene specifically for the rigorous demands of the research laboratory. Uniformly thin-walls promote rapid even thermal transfer for consistent amplification and increased recovery rate. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Corner Notch: H1 Surface Treatment: None Matching silicone cap mats: PCMATR-9-PRT Compatible with all standard 0.1 ml block thermal cyclers Maximum Volume: 200ul Working Volume: 100ul Volume with Mat: n/a Plates are packaged and sold 50 per case (5 bags of 10 plates each) Case dimensions (LxWxH): 10.5 x 8.75 x 4.5 (in) Case weight (lbs.): 3.3 Made from ultra-clear research grade silicone; no mold release agents RNase, DNase, DNA, PCR inhibitor free, and Pyrogen Free Certification (500 per CS )

200ul 96-well PCR Amplification Plate, PP Clear; 10 Plates Per Unit. 5 Units Per Case CS 50 (500 per CS)

Silicone Sealing Mat, 96-well, "-" perforated, Round for Deep Well Block (2mL), Printed Alpha-numerics; 10 Mats/Bag, 5 Bags/Case CS 50 (50 per CS )

Compression molded silicone sealing mats with 7.3mm diameter round plugs, are designed for standard 96-well storage and assay plates. Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. Mats fit tightly into wells preventing evaporation of VOCs, sample loss in storage, cross contamination, and reducing the risk of aerosols and pathogens venting during the automation process. They work in a wide range of temperatures for incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents. These seals pare well with automation as-well-as manual laboratory protocols. Often used in high-throughput applications or those involving accessing the sample through the cover multiple times. High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. Well perforations will seal themselves, after penetration, ensuring an airtight closure. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. (50 per CS )

200ul 96-well PCR Half Skirt, Elevated Wall (ABI style) Amplification Plate, PP Clear; 10 Plates Per Unit. 5 Units Per Case CS 50 (500 per CS)

100ul 96-well PCR Full Skirt Amplification Plate, PP Clear; 10 Plates Per Unit. 5 Units Per Case CS 50 (500 per CS)

Individual tubes with attached flat caps achieve even and precise thermal transfer to maximize your yield. Our standard profile, 0.2mL tubes with attached flat caps are precision molded for clarity and sample visualization. Flat caps are frosted for writing or labeling. Molded as a single part ensures a uniform fit for precise thermal transfer with minimal evaporation. Individual tubes with attached flat caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Recommended for low throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Each tube is joined to a cap, their thin and consistent wall thickness optimizes heat transfer to maximize yield. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNase, DNA, and pyrogen contamination (10000 per CS )

These individually wrapped and pre-sterilized single well reservoirs with 96 V-bottom troughs, combine space savings with automation friendly design. Sturdy and warp resistant, ultra-flat and rigid construction, with a stable base, this reservoir is ideal for manual or automated applications. The well of this reservoir has 96 “v shaped” indents to reduce dead volume and minimize reagent waste. It accommodates all liquid handling configurations. Mid-height design utilizes 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. To minimize space on platforms (when a stacker is not in use) or under hoods, these reservoirs can be filled and stacked. Packaged in medical grade Tyvek peel packs Ultra-flat surfaces Storage down to -80°C Automation compliant footprint (SBS/ ANSI/SLAS specification) Made from inert virgin polypropylene; no mold release agents or regrind RNase, DNase, DNA, and Pyrogen Free Certification (10 per CS )

Tube strips with attached flat caps make cross contamination and missing caps a thing of the past. Achieve even and precise thermal transfer to maximize your yield with our standard profile, 0.2ml well volume, 8-PCR tube with attached flat cap strips. Precision molded using only ultra-clear, virgin, medical grade polypropylene for clarity and sample visualization. These ILP attached tube and cap for PCR offer the same labeling surface. Molding as a single part ensures a uniform fit for precise thermal transfer with minimal evaporation. Tubes with attached caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Each tube is joined to a cap making cross contamination with the wrong cap impossible. Their thin and consistent wall thickness optimizes heat transfer to maximize yield. Recommended for low to medium throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Caps are angularly attached to allow full loading of standard thermal blocks and racks. Durable bands between the wells keep these strips ridged, easy to handle, and durable. Sections of tubes will not inadvertently break apart but are easily cut with scissors into smaller sections or individual tubes. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNases, DNA, and pyrogen contamination (600 per CS )

200ul 96-well PCR No Skirt plt, PP white, 10 plts/ut. 5 uts/cs (500 per CS )

Single well 384 place reservoirs with V-bottom troughs, combine space savings with automation friendly design. Sturdy and warp resistant, ultra-flat and rigid construction, with a stable base, this reservoir is ideal for manual or automated applications. It is compatible with stackers, plate handlers, cooling blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Mid-height design utilizes 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. To minimize space on platforms (when a stacker is not in use) or under hoods, these reservoirs can be filled and stacked. “v shaped” indents to reduce dead volume and minimize reagent waste Autoclavable Ultra-flat surfaces & rigid sidewalls Storage down to -80°C Automation compliant footprint (SBS/ ANSI/SLAS specification) Made from inert virgin polypropylene; no mold release agents or regrind RNase, DNase, DNA, and Pyrogen Free Certification (10 per CS )