Supplies

Molded as a single part, our individual 0.2mL tube with attached optically clear flat cap achieve even and precise thermal transfer while minimizing evaporation in your qPCR. Precision molded using only ultra-clear, virgin, medical grade polypropylene for clarity and sample visualization. Optically clear flat caps are ideal for fluorescence detection, luminescence, and imaging techniques including qPCR. The upper surfaces are extremely clear and offer greatly improved light transmittance over standard flat caps. Light signals pass through uninhibited for consistent and reliable qPCR performance. Caps have longer cap flanges that produce a tight fit and reduce sample evaporation. Tubes with attached caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Recommended for low throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Each tube is joined to a cap, their thin and consistent wall thickness optimizes heat transfer to maximize yield. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNase, DNA, and pyrogen contamination. (10000 per CS )

Silicone Sealing Mat, 384-well, "-" perforated, Square for Deep Well Block, Printed Alpha-numerics; 10 Mats/Bag, 5 Bags/Case CS 50 (50 per CS )

200ul 96-well plt, Nat, rd well, PS, Flat Bot, 10 plts/pk, 10 pks/cs (100 per CS )

Deep Well MicroPlates700ul 96-well, Round well, U-bottom, Glass Coated, Natural, Individually Wrapped, 1 plate/pack, 10 packs/case CS10 (100 per CS )

Nunc Style Shared Wall 1.2mL 96-well Plate, Clear, Round well, U-bottom, Shared wall, Sterile; 5 plates/pack, 10 packs/case CS 50 (50 per CS )

This 8 mm round well U-bottom plate combines 1.6mL working volume with automation friendly design. Sturdy and warp resistant design with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films. Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF. Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free (50 per CS )

This 8 mm round well U-bottom plate combines 1.6mL working volume with automation friendly design. Sturdy and warp resistant design with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films. Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF. Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free (50 per CS )

This 8-channel reservoir with V-bottom troughs, combine space savings with automation friendly design. Sturdy and warp resistant, ultra-flat and rigid construction, with a stable base, this reservoir is ideal for manual or automated applications. It is compatible with stackers, plate handlers, cooling blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. The 8 channels of this reservoir allow for the use of up to 8 different reagents. Each channel has a “v shaped” trough to reduce dead volume – minimizing reagent waste. This reservoir is designed to take a range of liquid handling configurations from 8 or 12 channel pipettes. Overall volume is 160mL; each channel can hold up to 20mL. Mid-height design utilizes 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. To minimize space on platforms (when a stacker is not in use) or under hoods, these reservoirs can be filled and stacked. Sturdy and reusable, our reagent reservoirs can stand-up to autoclaving, exposure to temperature extremes, and chemicals. Manufactured of inert and exceptionally clear virgin polypropylene that is resistant to most chemicals, solvents and alcohols used in combinatorial chemistry. This reservoir can withstand temperatures down to -80°C. Autoclavable Storage down to -80°C Automation compliant footprint (SBS/ ANSI/SLAS specification) Made from Virgin Polypropylene; no mold release agents or regrind RNase, DNase, DNA, and Pyrogen Free Certification (10 per CS )

40ul 384-well PCR 2-notch plt, PP Nat, 10 plts/ut. 5 uts/cs (500 per CS )

Deep Well Plates 700ul 96-well, Clear, Round well, Conical V-bottom, 5 plates/pack, 10 packs/case CS10 (50 per CS )

Individual tubes with attached domed caps minimize evaporation especially when used with small sample volumes, in thermal cyclers with heated lids, or older units. Achieve even and precise thermal transfer while minimizing evaporation with our 0.2ml, attached dome cap tubes. The domed cap design is to assist condensate to re-enter the reaction mixture and gain contact with heated lids for improved heat transfer. Precision molded as a single part creates parts with uniform fit and reduce sample evaporation. Tubes with attached caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Recommended for low throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Each tube is joined to a cap, their thin and consistent wall thickness optimizes heat transfer to maximize yield. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNases, DNA, and pyrogen contamination. (1000 per CS )

Nunc Style Shared Wall 1.2mL 96-well Plate, Clear, Round well, U-bottom, Shared wall; 5 plates/pack, 10 packs/case CS 50 (50 per CS )

100ul 96-well PCR Half Skirt, Elevated Wall (ABI style) Amplification Plate, PP Clear; 10 Plates Per Unit. 5 Units Per Case CS 50 (500 per CS)

Silicone sealing mats are made of research-grade silicone. They are chemically resistant and contain no adhesives or extractables to contaminate samples. Suitable for sealing rectangular 48-well storage and micro-plates, silicone mats provide sample protection while minimizing evaporation in a wide range of temperatures in incubation and storage applications. Silicone mats are especially good for sample processing or storage at higher temperatures or for applications involving aggressive solvents. Mats are suitable for high-throughput or other demanding applications involving accessing the sample through the cover multiple times. Each well has a perforation over every well that is cut 80% of the way through (but not all of the way). This allows sample access via pipettor, syringe, or probe. These scored perforations are designed to easily open to minimize coring and will seal themselves, after penetration, ensuring an airtight closure to the well. (50 per CS )

Full-skirt low profile, 96-well 0.1mL PCR plate works equally well for manual or automated protocols. The full skirt plate is a very rigid design, providing convenient barcoding areas and automation compatibility. Ultra-flat surfaces, large sidewall area, and rigidity optimize this plate for consistent automated handling with most robotic systems. Plate is easily oriented with corner notch and molded in alpha-numeric. Its ANSI/SLAS 1-2004 compliant footprint ensures that it will fit all standard fixtures, stackers, and other SBS compliant equipment. Plates are manufactured of low extractable, optically clear, virgin, medical grade polypropylene specifically for the rigorous demands of the research laboratory. Uniformly thin-walls promote rapid even thermal transfer for consistent amplification and increased recovery rate. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Corner Notch: H1 Surface Treatment: None Matching silicone cap mats: PCMATR-9-PRT Compatible with all standard 0.1 ml block thermal cyclers Maximum Volume: 200ul Working Volume: 100ul Volume with Mat: n/a Plates are packaged and sold 50 per case (5 bags of 10 plates each) Case dimensions (LxWxH): 10.5 x 8.75 x 4.5 (in) Case weight (lbs.): 3.3 Made from ultra-clear research grade silicone; no mold release agents RNase, DNase, DNA, PCR inhibitor free, and Pyrogen Free Certification (500 per CS )

This pre-sterilized shared wall 8.5mm round well U-bottom plate combines optimized mixing and storage with automation friendly design. Sturdy and warp resistant, with ultra-flat surfaces and rigid construction Ideal for automation – high throughput screening, sample collection, compound storage, LC/MS, mixing, and combinatorial chemistry applications. Compatible with stackers, grippers, heater/cooler blocks, autosamplers, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Mid-height to maximize storage, utilizing 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. With stacking lugs to help prevent toppling. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Made from Virgin Polypropylene; no mold release agents or regrind RNase, DNase, DNA, and Pyrogen Free Certification (50 per CS )

700ul 96-well plt, rd well, con V-bot, Glass Coated, Nat, Ind Wrap, 1 plt/pk, 10 pks/cs (100 per CS )

This pre-sterilized shared wall 8.5mm round well U-bottom plate combines optimized mixing and storage with automation friendly design. Sturdy and warp resistant, with ultra-flat surfaces and rigid construction Ideal for automation – high throughput screening, sample collection, compound storage, LC/MS, mixing, and combinatorial chemistry applications. Compatible with stackers, grippers, heater/cooler blocks, autosamplers, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Mid-height to maximize storage, utilizing 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. With stacking lugs to help prevent toppling. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Made from Virgin Polypropylene; no mold release agents or regrind RNase, DNase, DNA, and Pyrogen Free Certification (50 per CS )

Injection molded silicone sealing mats with 8.5mm diameter round plugs, are designed for 96-well storage and assay plates. Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. Mats have slightly longer plugs eliminating dead-space, and each plug has a molded in O-ring to aid in the prevention of sample loss in storage, evaporation of VOCs, and reducing the risk of aerosols and pathogens venting during the automation process. They work in a wide range of temperatures for incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents. These seals pare well with automation as-well-as manual laboratory protocols. Often used in high-throughput applications or those involving accessing the sample through the cover multiple times. High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. Well perforations are X shaped, and will seal themselves, after penetration, ensuring an airtight closure. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. Molded in alpha numeric grid for easy reference. (100 per CS )

1.1mL 96-well Plate, Clear, Round well, U-bottom; 5 plates/pack, 10 packs/case CS50 (50 per CS )

CODE: 10-LT-R-F-L-S Filtered, Low Binding, and Sterile Pipette Tips, compatible with Rainin LTS and XLS * Certified Dnase, Rnase, DNA/RNA, Pyrogen-Free * Filters Made of Virgin Hydrophobic Polyethylene * Tips Made of USP Class VI Virgin Polypropylene * Designed for low mounting and ejection forces * Precision dispensing with consistent tip orifice size * Sterile-Packed in Hinged Racks Color Coded Rack Inserts 20ul Red 200ul Green 300ul Yellow 1000ul Blue (4800 per CS )

Our pre-sterilized 4.6mL rectangular well plates feature an elongated “trough like” bottom. Suitable for large volume sample storage and analysis – combinatorial chemistry, environmental, and food testing Raised rims for optimized sealing Thin walls to maximize well volume unique elongated bottom trough – designed to act as a reservoir for samples and sample particulate. ANSI/SLAS 1-2004 – fits standard fixtures, stackers, and heater/cooler blocks Manufactured from inert medical grade virgin polypropylene Certified to be free of RNase, DNase, and Pyrogen contamination. (50 per CS )

CODE: 1000-LT-F-L-S Filtered, Low Binding, and Sterile Pipette Tips, compatible with Rainin LTS and XLS * Certified Dnase, Rnase, DNA/RNA, Pyrogen-Free * Filters Made of Virgin Hydrophobic Polyethylene * Tips Made of USP Class VI Virgin Polypropylene * Designed for low mounting and ejection forces * Precision dispensing with consistent tip orifice size * Sterile-Packed in Hinged Racks Color Coded Rack Inserts 20ul Red 200ul Green 300ul Yellow 1000ul Blue (4800 per CS )

120ul 384-well plt, Nat, sq Well, V-bot, 10 plts/pk, 10 pks/cs (100 per CS )