Reusable Glassware

KIMAX Crystallizing Dish Flat bottom and straight sides. Diameter: 80mm. Height: 40mm. (24 per CS )

Miscellaneous Arsine Generator Capacity (mL) 125. [standard taper] Joints 24/40. Approx. Overall Height x Width (mm) 285 x 65 An improved version of 241100-0000 this unit requires less space and set-up time and is easier to clean. (1 per EA)

Adapters Distillation Bent 105 [standard taper] Joints 14/20. Approx. Overall Height x Width (mm) 70 x 55 With a [standard taper] inner drip joint at the bottom and an [standard taper] outer joint at the top. (1 per EA)

Adapters Distillation Connecting BEVEL-SEAL [standard taper] Joints 14/20. Modified GPI Thread Size 13-425. Thermometer Immersion (mm) 25. Approx. Overall Height x Width (mm) 75 x 50 With a threaded top connection for plain stem thermometers. (1 per EA)

Adapters Inlet with Hose Connection [standard taper] Joints 14/20. Hose Connection #1. Approx. Overall Height (mm) 95 Vertical adapter with vacuum take-off and drip tip. (1 per EA)

Polyethylene Stopper Polyethylene linear high-density stoppers fit Neck Ground to [standard taper] Stopper size 19. Yellow and blue with a closed bottom. Enlarged flange is designed to protect the neck if the glassware item is tipped over. 6 stoppers per case.

Reflux Condenser 200mm. Internal coil-type cold finger. Outer joints at top inner drip joint at bottom and two hose connectors at top for water inlet/outlet. Tightly wound coil provides surface area to condense high vapor pressure solvents. Number 1 hose connection. 14/20 standard taper joint. (1 per EA)

Tubes Craig Recrystallization Tube Capacity (mL) 7. Approx. Height (mm) 100. Tube O.D. (mm) 14 Combination crystallizing and filtration centrifuge tube. Filtered solutions are allowed to cool in the Craig tube inducing crystallization. (1 per EA)

Distillation Column Vigreux Vigreux distilling column with indentations over the entire length for improved vapor-liquid contact. [Standard Taper] 14/20 joints. Column height: 130mm. (1 per EA)

Distillation and Reactors Head Short Path Vigreux [standard taper] Joints 14/20. Thermometer [standard taper] Joint 10/18. Hose Connections #1. Approx. Overall Height x Width (mm) 105 x 95 Design uses Vigreux indentations for increased surface area within the vapor path. (1 per EA)

KONTES Boiling Flask Round Bottom 100mL single neck flask with outer [Standard Taper] 14/20 joint. (1 per EA)

Stopcocks Straight Bore PTFE Plug Stopcock Straight Bore without PTFE Plug Replacement plug is 41500F listed below. (1 per EA)

Chromatography Column Cadmium Reduction with BEVEL-SEALTM Connections CHROMAFLEX Approx. Overall Height (mm) 350 This column features all borosilicate glass construction with an 85 mL reservoir. (1 per EA)

Tubes Chromatography Sample Tube with Screw Cap Capacity (mL) 2. GPI Thread Size 13-425. Approx. Body O.D. (mm) 14. Graduations x Subdiv. (mL) 0-0.3 x 0.01. Approx. (1 per EA)

Chromatography Column Neutral Oil and Loss CHROMAFLEX Weighing Base Apparatus for the determination of total neutral oil of natural fats and oils consisting of triglycerides and unsaponifiable matter. Unique design of the flask allows the transfer of the weighed sample directly onto the column. (1 per EA)

Condensers Friedrich Full Length [standard taper] Joints [standard taper] Joints 24/40. Jacket Length (mm) 225. Hose Connections #2. Approx. Overall Height (mm) 325 Specially designed to provide a long vapor path good heat transfer and anti-flooding characteristics. (1 per EA)

Condensers Graham Full Length [standard taper] Joints [standard taper] Joints 24/40. Jacket Length (mm) 200. Approx. Condensing Area (cm2) 164. Hose Connections #2. Approx. (1 per EA)

Condensers Liebig Full Length [standard taper] Joints [standard taper] Joints 24/40. Jacket Length (mm) 100. Approx. Condensing Area (cm2) 41. Hose Connections #2. Approx. (1 per EA)

KIMAX Culture Tube with PTFE-Faced Rubber-Lined Screw Cap Reusable. Features a large marking spot. Threaded phenolic cap can be loosened for autoclaving. Designed from ASTM Specification E982 Type VI Class B requirements. Sizemm: 20x150. Volume: 30ml. GPI thread: 18-415. (192 per CS )

Condensers West Full Length [standard taper] 24/40 Joints [standard taper] Joints 24/40. Jacket Length (mm) 100. Approx. Condensing Area (cm2) 34. Hose Connections #2. Approx. (1 per EA)

Condensers Allihn Full Length [standard taper] Joints [standard taper] Joints 34/45. Jacket Length (mm) 190. Hose Connections #2. Approx. Overall Height (mm) 275 Allihn reflux condenser with a straight outlet tube at top and a water cooled [standard taper] inner drip joint at bottom. (1 per EA)

Condensers Reflux Coil Type Full Length [standard taper] 24/40 Joints [standard taper] Joints 24/40. Coil Height (mm) 200. Approx. Condensing Area (cm2) 192. Hose Connections #2. Approx. (1 per EA)

Condensers Reflux Coil Type Full Length [standard taper] 24/40 Joints [standard taper] Joint 24/40. Cold Finger Length (mm) 225. Approx. Condensing Area (cm2) 474. Hose Connection #2. Approx. Overall Height (mm) 420 Reflux condenser with an internal coil-type cold finger. (1 per EA)

Condensers Large Capacity Full Length [standard taper] 29/42 Joints [standard taper] Joints 29/42. Jacket Length (mm) 500. Approx. Condensing Area (cm2) 900. Hose Connections #2. Approx. (1 per EA)