Glassware

Material: 316l SST with electropolish finish, ra 32 or better, inside & out Dimensions: harvest tube (3/8" od) - 1" above slug, 10 9/32" insertion length Addition tube (1/4"od) - 1" above slug, 2 21/64" below Vent tube (1/4" od) - 1" above slug, .975" below Supply with 45mm PP blue open top screw cap & white silicone gasket (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 6l Center Cap:100mm Sidearm cap: 45mm OD X OAH:204 X 410 (1 per EA )

Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. Sealed internal assembly requires less incubator space. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 100mm Flask size: 36 PADDLE; L X W:9.5 X 6 IN (1 per EA )

The Bellco Process Controlled Bottom Drive Roller Apparatus holds up to 50 (see specifications below) full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length). The unit features a brushless DC motor and controller that operate at bottle speeds ranging from 0.3 to 9.0 rpm with the ability to select clockwise or counter clockwise direction. Units feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Four corner bumpers and two locking castors (on the front wheel positions) are also provided. Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. (1 per EA )

The Bellco Process Controlled Bottom Drive Roller Apparatus holds up to 50 (see specifications below) full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length). The unit features a brushless DC motor and controller that operate at bottle speeds ranging from 0.3 to 9.0 rpm with the ability to select clockwise or counter clockwise direction. Units feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Four corner bumpers and two locking castors (on the front wheel positions) are also provided. Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. (1 per EA )

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units feature a solid state control with heavy-duty DC motor and analog tachometer. Non-modular production models feature rubber bumpers, handles and a slotted rear guard. (1 per EA )

The Bellco Sci/ERA Cell Production Roller Apparatus has been designed for production of mammalian cells, viruses and cell products. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. All units feature a solid state control with heavy-duty DC motor and digital tachometer. All Position Drives are for use with plastic roller bottles to prevent slipping of the light-weight bottles. A Stand-By Drive and Alarm System provides motion and power failure alarms and has a backup drive system that automatically drives the unit should the original fail. (1 per EA )

H/S Impeller Shaft only,5L . Bore x OAL 5/8 x 14" (1 per EA )

70 Mm Rotisserie For Mega Hybridization Oven. Holds Eight 70Mm I.D. Hybridization Bottles (Sold Separately). Manufactured From Stainless Steel. (1 per EA )

Round Bottom Glass Pipette Canister. Manufactured From Type 1, Class A Borosilicate Glass Components Will Withstand Repeated Dry Or Steam Heat Sterilization Case Qty: 6 (6 per CS )

Manufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Ideal use for cell culture and reduces shear in delicate cell culture. Blade dimension: 5 3/4 x 2 1/2" Shaft oal: 12" MARINE IMPELLER INCLUDES 1/2" SHAFT AND IMPELLER BLADE OMNI AND Z-Z PADDLES ARE ONE PIECE WELDED, 1/4" SHAFT (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 100ml Sidearm cap: 32mm (included) (1 per EA )

Adjustable Hanging Bar Spinner Flask without Bottom Dimple PTFE impeller assembly rides on glass bearing for friction free operation. 25 & 50mL have black phenolic rubberlined center and sidearm caps. 100mL-300mL have polypropylene caps, silicone gasket and pouring rings accumulation of microcarrier beads under impeller. 100mL. Center cap: 70mm, side arm 32mm. Dimensions: 69 OD x 110 OAH (1 per EA )

United Scientific® Pipettes, Volumetric, Class A, Individually Certified, 15 mL (5 per PK )

These Type 3 serological pipettes are made from borosilicate glass and comply with USP standards. Color-coded. Calibrated to deliver. Printed with durable amber markings. (6 per PK )

Adapters Distillation Bent 105 with Vacuum Take-Off [standard taper] Joints 14/20. Hose Connection #1. Approx. Overall Height (mm) 100 With a hose connector and a drip tip. (1 per EA)

Condensers Liebig Medium Length [standard taper] Joints [standard taper] Top Joint 14/20. [standard taper] Bottom Joint 14/20. Approx. Condensing Area (cm2) 34. Hose Connections #1. Approx. Overall Height (mm) 178 Design eliminates bulbs where holdup is likely to occur. (1 per EA)

KONTES Boiling Flasks Round Bottom 25ml single neck flask with outer [Standard Taper] 14/20 joint. (1 per EA)

Labsets kits Organic Chemistry Microscale Threaded Standard Academic MICROFLEX EKONO-CASE Standard Threaded Microscale Kit The 747000 Series MICROFLEX Kits feature versatile threaded chaste connections. They can be assembled rightside up or upside down providing great versatility. (1 per EA)

Adapters Connecting Threaded Microscale GPI Thread Size 13-425. [standard taper] Joint 14/20. Approx. Overall Height (mm) 50 [standard taper] inner ground joint to GPI thread. Allows interfacing of [standard taper] outer ground jointed glassware with threaded microscale components. (1 per EA)

Microscale Distillation Head Hickman Threaded Alembic Capacity (mL) 1. Flask Vol. (mL) 5. GPI Thread Size 13-425. Approx. Overall Height (mm) 80 Ideally suited for micro distillations especially for separations of high boiling samples. Flask is an integral component. (1 per EA)

Labsets kits Organic Chemistry Microscale Threaded Standard Academic MICROFLEX Item N GC Collection Tube 8-425 The 747000 Series MICROFLEX Kits feature versatile threaded chaste connections. They can be assembled rightside up or upside down providing great versatility. (1 per EA)

HPLC Adapter Solvent Pickup ULTRA-WARE Pickup Adapter Body 47mm Designed to be used with the Five Valve Four Valve and Filtration caps to provide safe in-line filtration that replaces the traditional pour-and-wait funnel filtration method. (1 per EA)

Still Head - Screw Thread 24/29 Socket Size (1 per EA )